Waterproofing products produced by Titan company, features and application

Waterproofing products produced by Titan company, features and application

*********(1) water-based waterproofing systems **

1- Stop Lake ------ ---
Stop Lake is a single-component waterproofing or waterproofing and protective coating based on water-based copolymers, white in color and with the ability to change color to the desired color of the client, which is flexible, long-lasting, and extremely adhesive. to concrete, metal pipes and other materials is one of its properties.
This insulation is designed and developed to contain positive pressure water and does not work to contain negative pressure water. In order to prevent negative pressure water by stop-lake, the surface must first be covered with a special primer for negative pressure water control, i.e. Killierband, and then stop-lake should be applied on it. 1-1 Use cases of stop-lake: Roof
Pool sealing
Concrete, stone and brick tanks sealing
Fixing leaks and dampness in bathrooms, basements and balconies
Simultaneous painting and insulation of facades, especially cement side facades Rain Covered (West View)
1-2 Features:
Stop Lake is very stretchy and can stretch up to 4 times its length. This elastic property causes that if the surface of the bed cracks after insulation and over the years; The insulating layer can maintain the sealing property by creating a bridge on it.
Stop leak can be easily installed on vertical and horizontal surfaces, even under the ceiling, and there is no limit to the work height.
Stop leak is integrated and It runs seamlessly. Therefore, while increasing the reliability of the sealing done, it does not impose an additional cost for the overlap (overlapping) of strips and materials to the project. Therefore, it can be very effective as a decorative element to create a roof garden and the like and satisfy the opinion of architects. and has glass.
There is a possibility of vertical tiling and stone work, on it with an adhesive method, and in the case of the floor, it is also possible to carpet the surface by using mortar.
Due to its high resistance to ultraviolet rays In addition to the possibility of being used inside the building and for sealing spaces such as toilets, it can be used in external environments such as the facade and roof for moisture insulation and sealing.
It is very easy to perform and in time Implementation and operation is odorless and smoke free.
1-3 Usage method:
If you are using Stop Leak to contain positive pressure water:
First, remove and repair the damaged points of the surface such as cracked concrete parts. The smoother the surface; The amount of stop leak consumption will be reduced and the insulation will be more economically viable.
Clean the surface completely, remove dirt and dust from it and dry it completely.
Primer for positive pressure control spray on the surface as a thin layer (each kilo of primer covers about 5 square meters). If you don't have access to a gun, you can prime the surface with a brush