Plaster insulation, kenaf, introduction of anti-dandruff products and stone glue

Plaster insulation, kenaf, introduction of anti-dandruff products and stone glue

1- Plaster insulation:
Gypsum and kenaf, in addition to being very absorbent; They show a quick reaction to the absorption of moisture and become cracked. This is despite the fact that it has a very wide application in the building, and although it is avoided to use it in areas of the building that have high humidity, but sometimes they are inevitably placed in the vicinity of moisture or in the vicinity of surfaces that absorb moisture. transfer
The important thing is not to expose plaster surfaces to moisture as much as possible.
But if you have to do this; Be sure to insulate the plaster surface with our recommended insulators and the method shown in the pictures.

------------------

2- How to prevent dandruff on the surface?
Dandruff is the result of the washing of the salts in the materials used in the building due to the movement of water and their deposition on the surface after the evaporation of the water. Therefore, to prevent the surface from scaling, it is necessary to prevent the movement of water from the surface to the inside and vice versa.
According to the explanation above, it is enough to spray a penetrating solution on the surface. In such a way that after the penetration of the solution into the surface, all the capillary tubes are blocked. Now the water path from the inside to the outside and from the outside to the inside is closed, so it will no longer be possible for the salts in the materials to dissolve in the water and move them to the surface, and the surface will never have dandruff again.
Introduction of Stop Salt product: one of the best materials that you can use for this purpose; The specialized anti-dandruff solution is Stop Salt. This solution is completely similar to water and colorless and can be easily sprayed on the surface. Spraying Stop Salt twice on the surface makes it completely resistant to dandruff. Remember that after drying, no traces of stop salt will remain on the surface. Therefore, if you stop spraying in the middle of the work, be sure to mark the applied boundary on the surface so that you can continue the work from there when you return.

------------------
3-: Megavan (stone glue)
Megavan is one of the solvent-free and two-component acrylic adhesives, the adhesive and hardener are mixed in a ratio of 1:1 and prepared for use. Megavan is very resistant to different weather and humidity conditions and has good resistance to chemicals and weak acid and alkaline solutions. The volume reduction of megavan after drying is below two percent and it covers standards D638, D695 and D790 of the ASTM standard series.
Applications: - gluing large pieces of stone, - making stone headstones, - gluing ceramic pieces, - old and new concrete pieces, - gluing tiles, bricks, iron and even wood.
If you want to get more information, please visit our website.\r[http://nhttps://nanotitanco.com/page/WoodProof](http://nhttps://nanotitanco.com/page/WoodProof)