All TAF TAF sell and buy offers

Taf Ab Gostar Alborz Company with its specialized and trained personnel and benefiting from polyethylene welding techniques and technical and engineering support of any services related to design, calculation, welding and installation Launches polyethylene systems throughout the country . Abstract Services - Providing welding and installation services for polyethylene pipeline projects - Providing welding services and installation of various types of polyethylene fittings Available – Initial design and execution schedule – Estimation of possible and additional costs – Complete execution o ...

Today, due to the importance of irrigation and the lack of water resources, the correct implementation of the irrigation system in every way can be effective in optimal water consumption. Certainly an irrigation system that is correct If it is not done with the necessary standards, not only does it not help to solve the problem of dehydration and water needs of the plant, but it will definitely cause serious damage to the plant and will result in loss of energy and cost. Taf Ab Gostar Alborz Company is proud to help you. Implementation of the most optimal and appropriate irrigation system help ...

Sale of all irrigation equipment, including: all kinds of concealed, percussive and all-round irrigation sprinklers, all kinds of drippers in different Iranian and foreign brands with different discharges, hard polyethylene pipes And soft with different operating pressures with the best materials, fertilizer tanks in different volumes from the best Iranian and foreign brands, smart and mechanical irrigation timers with different brands, 4, 6, 8 and 12 mm macaroni pipes, Iranian and foreign drip pipes, Types of irrigation tapes with different sizes in two types of Iranian and foreign with the b ...

Dripper pipes are polyethylene pipes, mainly manufactured in sizes 16 and 20 millimeters. Today, due to the excessive reduction of the country's water resources and farmers' tendency to use drip irrigation technology, manufacturers have been motivated to put all their efforts into facilitating installation and improving the efficiency of irrigation equipment. Dripper pipes with different spacing, uniform flow rate, and pressure control have eliminated the difficulty of installing drippers on irrigation pipes and are especially widely used in fields and orchards with regular planting patterns.

The Hunter electric valve refers to a component used to stop and start the flow of water and other fluids. The Hunter electric valve, made in the USA, is one of the most commonly used electric valves available and is used in irrigation systems. The solenoid of the Hunter electric valve is the same in all models, which is one of the unique features of the Hunter electric valve. The Hunter PGV electric valve is available in sizes 1, 1.5, and 2 inches. The Hunter ICV electric valve is available in sizes 1 inch, 1.5 inches, 2 inches, and 3 inches. The Hunter ICV electric valve features an EPDM di ...

The Hunter PGP Pop-up Sprinkler is a type of rotor sprinkler and is pop-up style. This sprinkler features adjustable arc settings and adjustable spray radius by changing nozzles (12 nozzles). The excellent design and remarkable performance of the Hunter PGP sprinkler with its rotor head, along with its continuous design improvements, have made the Hunter PGP sprinkler the best-selling rotary sprinkler worldwide. Having a large filter screen, proper water distribution through various precise sprinkler nozzles, durability, longevity, and low operating cost have made the Hunter PGP sprinkler stan ...

Technical Specifications of Hunter Irrigation Controller (Smart Irrigation Timer) • The Hunter irrigation controller or timer is offered to valued customers in two types: Outdoor and Indoor. • The difference between the indoor and outdoor timers is that in the closed or outdoor system, the controller receives numerical data from sensors, which we have predetermined, and issues commands to open and close the solenoid valves, causing changes in the irrigation system. For example, it can be set so that if the moisture sensor falls below 20%, solenoid valve number 2 starts operating. In the outdo ...

Rain RAIN Valves solenoid valves can be used to open and close the water flow in the connection path between main pipeline lines and secondary pipes. The Rain solenoid valve can be controlled by controllers (including Hunter and Rain controllers or digital timers). There is a screw on the cap of the Rain solenoid valve that allows manual shut-off of the fluid flow. Rain RAIN Valves solenoid valves can be used to open and close the water flow in the connection path between main pipeline lines and secondary pipes. The Rain solenoid valve can be controlled by controllers (including Hunter and Ra ...

Taf Ab Gostar Alborz Company intends to cooperate with contractors and executors in the water and wastewater sector by providing its tools, including polyethylene welding machines and accessories, as well as all necessary tools, on a daily and weekly basis to these dear colleagues. For more information, please contact us. Taf Ab Gostar Alborz Company, with specialized and trained personnel and utilizing polyethylene welding techniques along with technical and engineering support, provides all services related to design, calculations, welding, installation, and commissioning of polyethylene sy ...

Maintaining constant humidity is one of the important factors in greenhouses. Humidity below 30 percent is harmful to plants and may even lead to their destruction. The misting device or mist maker is used in summer to increase humidity and cool, and in winter to prevent the air from drying out. Access to optimal and desirable humidity in greenhouses depends on three factors: 1. Proper ventilation 2. Presence of shade 3. Humidity The misting system or mist system cools the space of greenhouses, poultry farms, and large halls through the process of water evaporation without wetting or drippin ...

The Hunter electric valve refers to a component used for turning water and other fluid flows on and off. The Hunter electric valve, made in the USA, is one of the most commonly used electric valves available and is used in irrigation systems. The solenoid of the Hunter electric valve is the same in all models, which is one of the unique features of the Hunter electric valve. The Hunter electric valve model PGV is available in sizes 1, 1.5, and 2 inches. The Hunter electric valve ICV is available in sizes 1 inch, 1.5 inches, 2 inches, and 3 inches. The Hunter electric valve model ICV has an EP ...

Sale of various types of soft and hard polyethylene pipes with different working pressures in various sizes suitable for use in farms and gardens for water supply and irrigation of green spaces, agriculture, and water and wastewater with the best quality, long lifespan, and resistance to sunlight from size 4 millimeters to ... made from first-grade materials Specifications of single-layer polyethylene pipe - Lightweight and easy to transport - Resistant to heat up to 80 degrees Celsius - Resistant to cold down to -70 degrees Celsius - Resistant to high pressure up to ...

Cut off risers are used for installing and positioning pop-up sprinklers for green spaces such as PGP, PGJ, and PSU on pipes. They come in two sizes, 1/2 and 3/4, with a length of 15 centimeters. Their design allows cutting to the desired size and height using a cutter or knife. Hunter SJ risers are also a suitable alternative to cut off risers because the sprinkler can be adjusted to any desired height and angle. SJ Riser Used for installing and positioning pop-up sprinklers for green spaces such as Hunter PS, PGP, PGJ sprinklers on pipes. Made of PVC in sizes "1/2, 3/4" with lengths of 15 a ...

SJ Riser Used for installation and placement of pop-up sprinklers for green spaces such as Hunter PS, PGP, PGJ sprinklers on pipes. Made of PVC in sizes 1/2", 3/4" with lengths of 15 and 30 centimeters. The advantage of the SJ riser over the cut-off is that the sprinkler can be easily installed at any desired position, height, and angle. For example, when pipes are placed in shallow trenches, in such cases the sprinkler body will not be completely under the soil. Using SJ risers allows you to position the sprinkler deeper relative to its pipe. This greatly contributes to aesthetics, better exe ...

This type of Hunter sprinkler, fully named PS Ultra, has a very delicate and slim body, making it highly suitable for installation in various locations. The sprinklers consist of the body, nozzle (spray), filter, and riser. Pop-up in sprinklers means that when water pressure reaches the sprinkler, the riser activates and rises, and after the pressure stops, it returns to its original place. This feature allows the pop-up sprinkler to be installed flush with the ground level to prevent physical damage (caused by impact with objects), theft, and more. Hunter PS sprinklers are suitable for use in ...

Tape irrigation (drip tape) is a type of drip pipe specifically designed for drip irrigation, first produced about 50 years ago in the United States. Tape drip irrigation is very suitable for dense and row crops. It is used for drip irrigation of various vegetables, cucurbits, row plants, forage, etc., such as watermelon, tomato, onion, potato, corn, strawberry, and greenhouse crops. Tape drip irrigation is suitable for surface and shallow subsurface drip irrigation. For deep subsurface irrigation, the use of drip emitter pipes is recommended. The CP Plast embossed tape is suitable for drip ir ...

The 180-degree micro jet sprays water in fine, powdery particles in a semi-circular rain pattern with a 180-degree spray radius. It requires a pressure of 1.5 to 2.5 bar to disperse water about 70 to 100 centimeters as fine droplets (slightly larger than a mist sprayer). Therefore, it is very suitable for irrigating short plants such as grass, flower bushes, etc., and for garden beds with a narrow width of about 1 to 1.5 meters. It can be easily installed on a 6-millimeter pipe or macaroni pipe, and can also be directly mounted on a 16-millimeter pipe (for plants that only need root irrigation ...

The jet spray requires a pressure of 1.5 to 2.5 bar to disperse water around itself in a radius of 70 to 100 centimeters as very fine droplets. The spraying method is 360 degrees and circular, and its particles are coarser than those of mist sprayers, which makes it excellent for watering short plants (grass, flowers, etc.). The 360-degree jet spray is suitable for small gardens and spaces with a width of about 150 centimeters. Microjets are available in two types in the market: Iranian and foreign. The foreign type is rarer, and the Iranian type is completely similar to the foreign type wi ...

The macaroni or spaghetti pipe is one of the pipes that is widely used. This pipe, besides being extensively used in irrigation systems, especially drip irrigation and mist irrigation systems, is also used in other fields. For example, this pipe is known in the market as a cooler pipe and is used in coolers as well as various industries. In drip irrigation, the macaroni pipe can be used to install drippers. This pipe is available in sizes 4, 5, and 6 millimeters in the market. It is mostly installed on drippers and is used in urban green spaces (municipalities) to direct the water output from ...

• A suitable box for embedding in soil, lawns, etc., to protect electric valves, meters, and equipment that require care and maintenance below ground level. • Available in rectangular and circular models in sizes 6, 10, 12, and 20 inches. • Protection against damage from direct water intrusion and impact. • Equipped with a screw lock on the lid. • Durable body to prevent root and weed intrusion into the box. • Suitable for use in sports fields, lawns, golf courses, equestrian grounds, gardens, private villas, and more...

The ZERO timer is recognized as one of the best single-output timers from the Italian company (Rain) in terms of quality and ease of use. This timer has the capability to irrigate more than 4 times a day. Compared to the Amico series timers of this company, this timer is more cost-effective and, with its simple operation and no need for training to program the timer, is widely used for irrigating green spaces on the scale of terraces, yards, roof gardens, and villas. Product specifications: - Suitable for irrigating vegetation cover, yards, pots, gardens, green roofs, and green walls - Afford ...

Suitable for: Irrigating pots and indoor plants – garden trees, flower beds, and private villas – flower boxes and terrariums – green walls and roof gardens – watering plants even when you are traveling Easy and user-friendly to use – battery operated without the need for mains electricity – affordable and high-quality irrigation timer – product of Rain company, Italy The Rain Click irrigation timer is one of the most practical irrigation automation products. This timer is essentially a control unit for micro-irrigation. This affordable irrigation timer is usually used in drip irrigation for s ...

This timer easily facilitates the implementation of irrigation in fully automatic, semi-automatic, and manual modes. It has two outputs with separate programmable capabilities for each. Technical Specifications: • Two outputs • Batteries: 2 AA size * 1.5 Volt • Display visibility at night • Detachable electrical part • Water inlet: 3/4 and 1 female • Water outlet: 3/4 male • Body material: ABS • Protective cover included • Maximum working pressure: 6 bar • Maximum flow rate: 40 liters per minute Equipped with a diaphragm solenoid valve

This timer easily provides the basis for fully automatic, semi-automatic, and manual irrigation execution. Standard three-quarter inch input and output Operates with two alkaline AA batteries Battery level indicator Equipped with a cover Large display with backlight Includes a metal mesh filter for water inlet Simple and precise programming from 6 hours up to 15 days depending on plant watering needs Suitable for terraces and places without electrical access Ideal for multiple and spaced garden beds

Spray radius 14 to 18 meters / 3/4 male connection / Operating pressure: 3 to 4 atmospheres Body material: brass / Adjustable spray from 20 to 360 degrees / Vyr full-circle impact sprinkler: Spray radius 14 to 18 meters / 3/4 male connection / Flow rate 1250 to 3200 liters per hour / Operating pressure 3 to 4.2 atmospheres / Body material: cast iron / Full circle Vyrsa sprinklers are available in various models with short, medium, and long throw radii in the market, primarily designed for farms and green spaces. The types of Vyrsa agricultural sprinklers include models Vyrsa35, 36, 50, 80, 60 ...

Water has always been a symbol of tranquility and freshness for humans. Throughout history, the influence of the water element in world and Iranian architecture has led to the creation of beautiful and pleasant spaces. Today, water has entered the interior spaces of our homes in a modern and fresh way, and many of us certainly enjoy having a beautiful fountain in a corner of our home. Today, these pre-made fountains are designed and produced in various styles and colors. You just need to review catalogs and samples to find what suits your taste. The advantages of these pre-made fountains are: ...

The Technical and Engineering Group Taf Ab Gostar Alborz started its activities in the field of manufacturing fountain and fountain nozzles as well as designing and implementing fountain and fountain projects throughout Iran. Direct sale of composite fountains, fountain and fountain equipment including pool fountain nozzles, rain blade nozzles, water curtain nozzles, high and low pressure misting systems, pool electrical equipment, fountain nozzles, fountain pumps and submersible pumps, special lights for fountains and fountains, pipes and fittings, humidifiers, fountain collectors, various m ...

The rectangular sprinkler is a product from the PS sprinkler family by Hunter company. It is a type of nozzle that sprays in a rectangular pattern and is mounted on the Hunter PS sprinkler base. Therefore, the Hunter rectangular sprinkler has a slim and narrow body, making it very suitable for installation in various locations and irrigating different green spaces. The parts of the Hunter SS model sprinkler include the body, nozzle (spray), filter, and male riser. The Hunter rectangular sprinkler is also of the pop-up type. This means that when water pressure reaches the back of the sprinkler, ...

Special sale of 8-liter Turbo Iran Drip drippers, pressure regulators, approved by the Agricultural Jihad, with exceptional discounts. Turbo drippers operate within a pressure range of 1 to 3 bars with a fixed and specific flow rate. The flow rate remaining constant despite pressure changes allows their use on uneven lands, resulting in equal irrigation across all parts of the field. It also ensures that all drippers installed on a lateral line discharge water equally. You can open the dripper to clean it and after cleaning, place it back in its position. This dripper is produced in two models ...

Stand drippers, or arrow drippers, are very suitable for watering pots inside gardens and greenhouses. They can be installed on 4, 5, and 6 millimeter spaghetti pipes and offer the highest efficiency and performance due to the long water flow path. They have a very low coefficient of variation. Advantages of this type of dripper include the ability to precisely install the dripper at the desired location, uniform water distribution, and the possibility to install other drippers to add pressure regulation and anti-siphon features.

The Aytok disc filter consists of a polyamide housing that contains several stacked plates or discs inside. The discs have grooves where algae, weeds, and other impurities get trapped, thus purifying the water. The discs are concentrically mounted on a rod. Aytok is a Turkish brand and is one of the most popular brands among dear farmers. Aytok disc filters are used to separate water from biological materials and suspended particles in drip irrigation. The disc filters, with their extremely narrow grooves on the discs, capture very fine suspended particles and materials in the water.

Impact sprinklers have one or two sprinkler heads (or nozzles) that project a jet (fountain) of water into the air and are among the most common agricultural sprinklers. A single-nozzle sprinkler has one outlet orifice, consumes less water, and performs irrigation quite uniformly. In a two-nozzle sprinkler, one nozzle has a long range and operates similarly to the single-nozzle sprinkler, while the other nozzle has a short range and irrigates the area around the sprinkler. This way, water consumption and water distribution uniformity are increased. Opposite the water jet outlet, there is a sp ...

Hunter PS Sprinkler Nozzle: 10A, 12A, 15A, 17A and 4A, 6A, 8A sold separately (nozzle and body sold separately). [Hunter nozzles are distinguished from each other by different colors. Also, each number - for example 10 - indicates the approximate spray radius of the sprinkler in feet. One foot is about 30 centimeters. So the Hunter 10A sprinkler has a spray radius of about 3 meters.] Sprinkler flow range: 0.8 to 20.1 liters. Hunter PS sprinklers are suitable for use in home yards and gardens, irrigating green spaces and small lawns. One of the most important features of the sprinkler is that i ...

Eurodrip Greece dripper product, comparable with Netafim drippers. Currently, considering the presence of counterfeit and low-quality Netafim drippers in the Iranian market, using Corona drippers, which do not yet have counterfeit versions available, seems reasonable. This is due to the lower demand for purchasing these drippers by farmers and orchardists, stemming from a lack of awareness and sufficient knowledge about Corona drippers and other drippers. Features and technical specifications: Recommended filtration: 130 microns / 120 mesh Operating pressure: 0.5 to 4 bar (within this pressur ...

Sale of Jain drippers with flow rates of 4 and 8 liters per hour, self-compensating type (PC) model ClickTif HDE, made in India by NaanDanJain company. Jain drippers are produced from high-quality raw materials and are sold in flow rates of 4 and 8 liters per hour. These drippers have been approved by the Office for the Development of Modern Irrigation Systems of the Ministry of Agriculture Jihad and are suitable for use in drip irrigation projects. Features of Jain Drippers Jain drippers can be used in orchards, greenhouses, and green spaces. Some of the features of these drippers include: 1 ...

Netafim drippers are offered to customers in two series with capacities of 2 liters, 4 liters, and 8 liters. The Netafim dripper is a tool that delivers water drop by drop to the plant's root. Netafim PCJ Dripper Netafim CNL Dripper The Netafim dripper is considered a single dripper on the line and is provided in packages of 13,000 units. Technical Specifications of Netafim PCJ Dripper | Model | Flow Rate (liters per hour) | Minimum and Maximum Operating Pressure (bar) | Base Color | Cap Color | |---------------------|-----------------------------|------------------------ ...

The Rain timer model Click Mist is the best method for controlling the misting system, allowing irrigation with cycles and short watering durations. Another use, especially in the hot season, is for temperature reduction. The operation of this device is similar to Click irrigation timers, with the difference that the timer programs are different due to its use for misting systems. • Has 12 fixed programs (pre-programmed) • Misting times of 5, 10, 20, and 30 seconds • Misting off intervals of 1, 2, and 5 minutes • Minimum operating pressure of 1 bar • Maximum operating pressure of 4 bars • Oper ...

Eurodrip Greece dripper, comparable to Netafim drippers. Currently, due to the presence of counterfeit and low-quality Netafim drippers in the Iranian market, using the Corona dripper, which does not yet have counterfeit versions available, seems reasonable. This is because of the lower demand from farmers and gardeners, stemming from a lack of awareness and sufficient knowledge about the Corona dripper and other drippers. Features and Technical Specifications: Recommended filtration: 130 microns / 120 mesh Operating pressure: 0.5 to 4 bar (within this pressure range, the output flow from the ...

Sale of Jain drippers with flow rates of 4 and 8 liters per hour, self-compensating type (PC) model ClickTif HDE, made in India by NaanDanJain company. Jain drippers are produced from high-quality raw materials and are sold with flow rates of 4 and 8 liters per hour. These drippers have been approved by the Office of New Irrigation Systems Development of the Ministry of Agriculture Jihad and are suitable for use in drip irrigation projects. Features of Jain Drippers Jain drippers can be used in orchards, greenhouses, and green spaces. Some of the features of these drippers include: 1. Flushin ...

Netafim drippers are offered to customers in two series with capacities of 2 liters, 4 liters, and 8 liters. The Netafim dripper is a tool that delivers water drop by drop directly to the plant roots. Netafim PCJ Dripper Netafim CNL Dripper The Netafim dripper is considered a single dripper on the line and is provided in packages of 13,000 units. Features of Netafim Dripper - Pressure regulation and uniform irrigation (PC) across the field - Required filtration: 120 mesh - Equipped with a turbulent labyrinth system with a long flow path - Can be installed on pipe - Very high distribution uni ...

This sprinkler is one of Hunter's powerful sprinklers designed for large lawns with a long spray distance. High build quality and long lifespan are features of this product. Technical specifications: Rubber cover Arc adjustment from the top Radius adjustment screw Rotary Spray radius: 11.9 to 20 meters Operating pressure: 2.5 to 7 bar Water flow rate: 13.6 to 120 liters per minute Inlet: 1 inch female Spray radius adjustable from 50 to 360 degrees

The HUNTER I40 sprinkler is a Hunter retractable sprinkler with many features. The Hunter I40 sprinkler comes with a factory-installed rubber head. The HUNTER I40 has a controllable head and easy adjustment capability. Height: 20 cm for model i40-04 and 26 cm for model i40-06 Retractable part height: 15-10 cm Diameter: 5 cm Spray radius: 14 to 22 meters Normal operating pressure: works best from 3 to 5 bars Inlet: 1 inch Flow rate: from 30 to 110 liters per minute Arc adjustment: from 50 to 360 degrees Equipped with 6 standard black nozzles for regular models and 6 colored nozzles for models w ...

The I-90 sprinkler has the longest spray distance among Hunter's rotary (rotating) sprinklers, designed and manufactured for use in parks, sports fields, and public spaces. Providing a spray radius of about 30 meters with just one sprinkler, the I-90 becomes an unrivaled sprinkler capable of covering this area for irrigation. Additionally, its relatively compact size and rubber cover make the I-90 a suitable choice for the green spaces of parks and open grass-covered fields; it is also suitable for use in sports fields. The Hunter I90 rotary sprinkler (model I90-ADV) is sold with a spray radi ...

Attention farmers, gardeners, and valued customers... The trading group of Taf Ab Gostar Alborz Company intends, simultaneously with the year-end inventory, to sell a limited number of 20 cm irrigation tapes available in its warehouse at an exceptionally special price. For more information and to benefit from all exceptional discounts on purchasing drip and sprinkler irrigation equipment and accessories, please contact the company's trading department. Drip tape is used for drip irrigation of row and seasonal crops such as tomatoes, peppers, potatoes, strawberries, onions, sunflowers, melons, ...

16mm polyethylene pipe (3/8 inch) is the smallest size of pipe produced. This pipe is only available in coils with lengths of 100, 200, and 400 meters and thicknesses of 1/4 and 1/2. The 16mm pipe is produced in two types: plain and dripper-equipped, with weights of 19, 21, and 25 kilograms. In the dripper-equipped polyethylene pipe, dripper spacing depends on the customer's order and can be 20, 30, or 50 centimeters, eliminating the need to install drippers separately. In the type without drippers, various drippers such as olive, pencil, pot, Netafim, etc., can be used. The 16mm size polyeth ...

25 millimeter (3/4 inch) polyethylene pipe is produced in coils and lengths of 100, 200, and 400 meters, with working pressures of 6, 10, 12.5, and 16 atmospheres. 25 millimeter (3/4 inch) polyethylene pipe is produced in coils and lengths of 100, 200, and 400 meters, with working pressures of 6, 10, 12.5, and 16 atmospheres. To connect 25 millimeter diameter pipes to each other or to other parts, it is better to use polyethylene threaded fittings, and due to the thin pipe wall, welding is not recommended. Applications of 25 millimeter polyethylene pipe: - The 25 gas pipe is used for branchin ...

The 32 millimeter polyethylene pipe, equivalent to 1 inch which is its external diameter, is produced in working pressures of 6, 10, 12.5, and 16 atmospheres in coils of 100, 200, and 400 meters. This size of polyethylene pipe is not produced in straight lengths. The 32 polyethylene pipe with international standard certification can withstand high water pressures; it is strong, lightweight, and flexible. Therefore, it is suitable for urban water supply, building water provision, water transfer to agricultural farms, and pressurized irrigation. Pipes without standard certification are used for ...

40 millimeter polyethylene pipe or 1/4*1 inch is produced and supplied in pressures of 6, 10, and 16 atmospheres in 100-meter coil lengths according to the HDPE table with PE80 and PE100 materials. For 40 millimeter polyethylene pipes, polyethylene welded fittings are not produced. To connect them to each other, threaded polyethylene fittings are used. Application of 40 millimeter polyethylene pipe: • Water transfer • Acidic materials • Agriculture • Electrical cable sheath These pipes are produced with and without the standard mark in various grades. Note: 40 millimeter polyethylene pipe is n ...

The first hypermarket for drip irrigation equipment in the country Special discounts for dear farmers and gardeners on the occasion of the store opening Design, implementation, and specialized consultation for drip and sprinkler irrigation systems Free consultation for respected farmers and gardeners All automatic, manual, and sprinkler drip irrigation equipment Various irrigation tapes (type) and all related fittings Lay-flat (threaded pipe) and all related fittings Polyethylene pipes with the best quality and lowest price Drip emitter pipes Various Hunter pop-up sprinklers ...

The Vispar polymer sprinkler is available in two types with black and orange colors and comes in two models: adjustable and full-circle. The Vispar polymer sprinkler comes with a one-year warranty and spare parts. The Vispar polymer sprinkler is offered in two sizes, 1 inch and 3/4 inch, in both adjustable and full-circle types. • Working pressure: 1 to 4.5 bar • Type: full-circle and adjustable • Size: 1 and 3/4 inch • One-year warranty • Spare parts available All fittings including automatic valves, automatic valve keys, risers, etc. are available. For free consultation and more informatio ...

The 3-arm sprinkler is suitable for irrigating large areas such as lawns, allowing you to effectively water your desired space. This sprinkler model is ideal for small spaces (gardens, villas, home yards). With an operating pressure of 1.5 to 2 bars, you can easily connect your home garden hose to this sprinkler and enjoy watering your garden beds. Easy installation and low operating pressure have made this product popular among customers. This sprinkler is not suitable for agricultural spaces.

Various types of Grade 1 three-layer water hoses in sizes 1/2, 3/4, 1 inch, 1 1/4, and 2 inches in diverse models with various colors Irrigation hoses Darakar patterned hose - Iran Yasa pattern from 8 to 25 kg Transparent - Threaded - Gel Firefighting hose 25, 30, and 50 meter coils Fast nationwide delivery Use of attractive and vibrant colors Variety in production, high product quality, and customer orientation are our hallmarks Please contact our experts for more information Sales both in-person and online The best and highest quality are with us

Sale of Fitab rubber-sealed gate valves approved by the Agricultural Jihad, with a 3-year replacement warranty and 5 years of after-sales service. The body is made of ductile cast iron which is unbreakable, and the body is coated with electrostatic powder paint with an anti-corrosion protective layer. Shaft material: stainless steel Available in two types: 16 bar (PN16) and 10 bar (PN10) Sizes from 50 mm (2") to 250 mm (10") Suitable discount rates for esteemed colleagues across the country Fast nationwide shipping In-person sales available for local customers

The first hypermarket for drip irrigation equipment in the country Design, implementation, and specialized consulting for drip and sprinkler irrigation systems Free consultation and special discounts for dear farmers and gardeners on the occasion of the store opening All automatic, manual, and sprinkler drip irrigation equipment Various irrigation tapes (type) and all related fittings Leaflet (threaded pipe) and all related fittings Polyethylene pipes with the best quality and lowest price Drip emitter pipes Various Hunter pop-up sprinklers Automatic irrigation timers Irrigation controllers I ...

The Techno Barash disk filter is a device for water purification in irrigation systems that uses its grooved disks to remove suspended particles and impurities from the water, helping to provide clean water for drip irrigation and industrial uses. These filters are produced in various sizes, including 2 and 3 inches, and are made of durable polyamide. Applications and Features: • Water Purification: Removes suspended particles and impurities present in the water • Irrigation Systems: Widely used in drip irrigation systems to prevent clogging of drippers. • Industrial Uses: Also ...

Threaded pipe is one of the most widely used pipes in agriculture due to its flexibility and foldability on uneven and hilly lands with long distances. Additionally, because of its low volume, light weight, and reasonable price, it is a very suitable option for irrigating agricultural lands and water transfer. The material of these pipes is PE (polyethylene) with thread and UV-resistant coating - five layers including 2 layers of thread and 3 layers of PE. Operating pressure between 1 to 2 bar. Their useful life is more than 5 years and they come with a 2-year warranty. Features: - 5 layers - ...

Receiving sufficient water, nutrients, and a steady flow of oxygen in the root zone is essential for all seedlings and mature trees. The cylindrical subsurface irrigation system, by applying irrigation techniques in the root zone, provides adequate water, a steady flow of oxygen, and nutrients in the area, promoting root development and creating strong roots to ensure the tree's sustainable health. This system is easy to install and, due to its subsurface nature, is protected from any damage. Overall, this system is an optimal and innovative solution for watering the root zone of trees, shrubs ...

دریافت آب کافی ، مواد مغذی و جریان ثابت اکسیژن در ناحیه ریشه برای کلیه نهال ها و درختان کهنسال ضروری است . سیستم آبیاری زیر سطحی استوانه ای با کاربرد تکنیک آبیاری در ناحیه ریشه ، آب کافی ، جریان ثابت اکسیژن و مواد مغذی را در ناحیه تامین خواهد کرد و با توسعه ریشه گیاه و ایجاد ریشه های قوی سلامت پایداری درخت را تامین می کند . این سیستم به راحتی قابل نصب بوده و به دلیل ماهیت زیر سطحی امکان هرگونه تخریب در آن وجود ندارد . در مجموع این سیستم یک راه حل بهینه و مبتکرانه برای آبرسانی در ناحیه ریشه درختان ، درختچه ها و انواع بوته ها می باشد . مشخصات : طول بدنه : 25 و 50 سانتیمتر قطر دهانه : 8 س ...