There are no comments for this product
The water distributor or sprinkler nozzle is actually one of the main components of the cooling tower, responsible for evenly distributing water over the cooling tower packings. In fact, the incoming water flow to the cooling tower is directed towards the nozzles by the pump pressure and piping network, and depending on the type of nozzle, it is sprayed onto the internal filling surfaces. The spraying method and uniformity of water distribution by the nozzles have a direct relationship with the optimal performance of the device. The appropriate size of the cooling tower nozzle, the division, and correct placement of the sprinklers inside the cooling tower can help distribute water to all parts of the packing media, which in turn ensures the proper operation of the device. For this reason, servicing, maintenance, descaling, and timely replacement of the nozzles are very important. In fact, the nozzle or water distributor is considered the main center of water distribution and dripping and is installed in the water spraying device by threaded connection. Due to this connection method, this practical component in the cooling tower quickly accumulates scale and clogging at the inlet and outlet parts and must be regularly inspected and serviced.
Azin T ventilation produces and supplies cooling tower parts Cooling Tower Water Distributor Square spray and elbow cooling tower nozzles PVC packing - cooling tower louver Cooling tower drift eliminator Cooling tower fan and more... One of the main parts in hyperbolic cooling towers is the water distribution system and the water distributor component. Water distributors are produced in sizes from 2 inches to 12 inches. The materials of cooling tower water distributors include plastic, aluminum, and brass. The best type is the brass water distributor, which has a long lifespan, but its high price has led to less usage. The aluminum cooling tower water distributor is one of the best options, offering acceptable quality alongside a reasonable price.
One of the differences between cubic and round cooling towers is the shape and type of water distributor. The cooling tower water distributor, also known as the rotary water distributor, water distribution head, and sprinkler head, is specific to hyperbolic cooling towers. For water distribution in round towers, a single water distributor is used at the center, to which several perforated pipes are connected. The cooling tower sprinkler rotates with the help of the incoming water pressure and directs water through the distributor's outlets towards the perforated pipes. The warm water is regularly and continuously sprayed in droplets from the distributor pipes onto the packing materials. In round cooling towers, the main water inlet pipe is located at the center, and the water distribution head is attached to it. Usually, cooling tower water distributors are made of aluminum; however, upon order, rotary distributors can also be made from stainless steel, plastic, and brass. Note that the price of brass water distribution heads is significantly higher than aluminum water distributors. The round cooling tower water distributor is produced in sizes from 2 to 12 inches, and depending on the inlet size, the number and size of outlets are designed differently. Depending on the water pressure, the sprinkler rotation speed varies; however, the standard is that a water distributor should rotate about 7 to 10 revolutions per minute to properly distribute the incoming water over the packings. A speed lower or higher than this reduces efficiency and causes operational issues in the tower.
There are no comments for this product
| Company | آذین تهویه |
|---|---|
| Tel | +98 21-0×××4201355, +98 21-0×××4201355 |
| Mobile | +98 919×××1355 |
| Whatsapp link | |
| Instagram page | |
| Website | https://www.azintahvie.com/ |
| Country | Iran |
| Province | Tehran |
| Address | دفتر مرکزی: تهران، بلوار دریا، خ مطهری جنوبی، نبش 18 |
Jooyeshgar AI Assistant
