Cooling tower water dispenser - sale of cooling tower nozzles

Cooling tower water dispenser - sale of cooling tower nozzles

Water distribution in the cooling tower :
The water distributor of the cooling tower must work in its best condition so that the cooling efficiency of the cooling tower is the best possible. If the water dispenser is damaged or does not circulate properly, the incoming water will not reach all the points of the packings, and as a result, the operation of the device will suffer serious problems, and you will feel the difference in the temperature of the incoming and outgoing water at its minimum. Measures should be taken regularly to visit and service cooling tower nozzles. In the circular cooling tower, metal and aluminum water sprinklers are used, which are placed in the center of the cooling tower.
Azin ventilation manufacturer of all kinds of cooling tower water dispensers in Iran \r[http://nhttps://www.azintahvie.com](http://nhttps://www.azintahvie.com) /product/346/cooling-tower-nozzle
Of course, the most obvious effect of the nozzle is due to its main function of filling hot water and distributing it to all parts of the cooling tower. Ideally, nozzles are positioned to provide a uniform pattern of water with no gaps between their spray areas. You've spent "how much money" on your cooling tower sprinkler, so now you need to make sure it's thoroughly wetted and all filled parts are getting a consistent amount. You use it completely.
Sprinkler or water spreader sprays water uniformly on the packings of the cooling tower through the pipes connected to the outlet by the pressure of the incoming water and through circulation. The material used in the construction of this piece can be plastic, aluminum, brass and steel. But according to experience and over time, it has been proven that the best type of water dispensers, which have a reasonable price and a good lifespan, are aluminum water dispensers. Of course, it is understandable that water dispensers with brass material Or steel can work much better than water dispenser with aluminum alloy and have a longer life. But its price is several times that of the aluminum type, and for this reason, considering all the factors, we recommend the aluminum sprinkler head. This part of the circular cooling tower is designed in different sizes (2 to 12 inches). and it is produced, its output part is variable and between 4 and 8 outputs are connected to a water dispenser, which is usually used in the output part of high pressure upvc pipes.
The water dispensers consist of two general parts are The first part is the stationary part of the sprinkler stator, and the second part is the moving part of the sprinkler rotor. The important point in choosing the water distribution is the inlet size and the number of outlet pipes, which you should pay attention to when replacing the sprinkler head. Also, the bearing used in the construction of water dispenser or cooling tower nozzle plays a big role in its lifetime. Azin Air Conditioning Company uses high-quality Japanese bearings in its water dispensers.