Crane and winch

Mehr Engineering Company, with more than 25 years of experience in the country's metrology industry, is proud to serve the hardworking Iranian craftsmen by producing the most advanced Iranian hardness tester after years of providing services in the field of material testing and hardness measurement. The hardness tester of metals is one of the most important parts in the test and quality department, the Rockwell hardness tester of Mehr Engineering, with the benefit of the latest digital systems, with the highest quality and the most suitable price, is a suitable alternative in terms of quality and economy to the hand Rockwell hardness tester. Hardness devices are old and Chinese. The close loop system and the application of force of the Hardness device of Mehr Engineering Company is unique in its kind, and this technology is one of the most accurate devices in the market in terms of measurement accuracy. The scales of Mehr Engineering hardness tester are as follows: 1- 15 Rockwell method (A, B, C, D, E, F, G, H, K, L, M, P, R, S, V) 2- 15 Rockwell super facial methods (15N, 30N, 45N, 15T, 30T, 45T, 15W, 30W, 45W, 15X, 30X, 45X, 15Y, 30Y, 45Y) Contact us for free consultation and to visit the permanent exhibition of Mehr Engineering. Phone: 021-3-44782171 extension 212 Mehr Engineering Company: info@mehr-eng.com Sales Department: sales@mehr-eng.com Laboratory: laboratory@mehr-eng.com After-sales service department: salessupport@mehr-eng.com Foreign Trade Department: commercial@mehr-eng.com

Production and importer of all kinds of gaskets and plates from the world\'s companies including GEA, APV, ALFA LAVAL, SONDEX, SWEP, and...\r\nImporter of welding transducers from different companies in the world, APV, ALFA LAVAL, SONDEX, SWEP, GEA, and...\r\nImporter of all kinds of parts and machines from different companies in the world, APV, ALFA LAVAL, SONDEX, SWEP, GEA, and...\r\n(Professionals are committed to quality)\r\nArum Madabat company is the largest producer and importer of all kinds of plate gaskets in different models from different companies including GEA, APV, ALFALAVAL, SONDEX, SWEP, scMIDT, STORK, FISCHIER and...\r\nAt the same time, we are a producer of all kinds of rubber parts, such as spool nut washers, valves, clamps, O-rings, packings, vacuums, dust collectors, and all kinds of diaphragms, rollers, etc., in different sizes and materials, NBR, HNBR, EPDM, SI, VI and ... is .\r\nArum Mebadat is the largest manufacturer and importer of all types of plate heat exchangers and plate heat exchangers.\r\nIt should be mentioned that it is the only importer of all kinds of gaskets and plates produced in Turkey with excellent quality with more than 20 years of experience.

Rail ovens for baking paint and granite Suitable for setting up a container repair workshop The most modern equipment in the country Buy at a reasonable price and excellent material Furnaces with steel hearth capable of 200 cooking per working hour along with the rest of the required equipment for sandblasting, cabins, cyclones, etc. Expert advice and on-site installation To get additional information and see the catalog Call I am Nizami, sales expert of the company 09147882829

Grampel Wolf fiber production machine ✨️\r\nThe\r\n● Production capacity: 120 kg per hour\r\n● Weight: 600 kg\r\n● Dimensions: 180*120*180\r\n● Electricity: three phases\r\nThe\r\nTo know the price and get more information, call 09135557723. ????????????\r\nThe\r\nShipping inside and outside of Iran✈️????

Timatic\'s wind smoothing hammer is a very high-quality and highly demanded product for making waves and leveling car body surfaces, which creates blows controlled by the wind.\r\n\r\nFeatures of the Timatic air smoothing hammer\r\nThis product delivers 45 strokes per second, which greatly increases the speed of the smoothing master. Also, with the wind pressure control regulator screw, the strength of the strokes can be reduced or increased.\r\n\r\nThe material of the lower molds of the machine is made of 1/7176 alloy steel or that is the plated spring, which is very hard and strong. The surface of the mold is machined and polished.\r\n\r\nThe bottom molds are replaceable and two flat and curved trunk molds are provided with the device. It is possible to order a trunk mold with a special and exclusive form.\r\n\r\nAccessories included with the product include the following:\r\n\r\nToolbox\r\nprotective phone\r\n2 trunk molds\r\nSpare screw and oil tank\r\nTimatec inflatable trunk molding machine\r\nTimatec warranty card and services\r\nAlong with 1 year warranty and 10 years after sales service and parts supply.

At Garhamani Polyurethane Industries, all types of polyurethane serand nets used in serand granulation and water-absorbing devices are designed and produced from the opening size of 80 microns and above and in different dimensions.\r\nThe advantage of polyurethane nets: excellent resistance to wear, tear, all kinds of acidic, solvent and oily substances. \r\nResistance to salt water, ultraviolet rays,\r\nSelf-cleaning capability and no load getting stuck in the opening\r\nEasy installation and replacement\r\nEconomic benefit against similar metal and rubber samples \r\nTypes of polyurethane nets used in absorbent and granulation nets: 12-pin Serand net, 4-pin Serand net, Raily Serand net, Multotech Serand net, Scalper Serand net, Serand Bedar net, Trommel Serand net

**[Ajilka] (https://www.ajilka.com)** peanut butter machine is produced and supplied in 2 single-phase and 3-phase models.\r\n\r\nAjilaka industrial peanut butter machine with the ability to produce hard and soft peanut butter in high volume, has the ability to adjust the roughness and softness of the produced butter and can produce creamy to orangey butter.\r\n- This device has a one-year company warranty. Shipping is free.\r\n\r\n- See how it works, you won\'t be looking for the device anymore.\r\n\r\n\r\n- Supplying raw materials for butter and oil extraction in **[Ajilka website] (https://www.ajilka.com)**

Production line of polymer concrete pipes from B+S Germany\r\nWe are one of the largest manufacturers of polymer concrete pipes and its derivatives. Our machines are at the highest level in terms of technology. As a managed company, we offer you the highest flexibility in order processing, sales, development and design as well as production, service and training. Experience has made this company a first-class supplier of concrete plants. \r\nPolymer concrete has been used for decades as a material for industrial applications and pipelines. It can also withstand aggressive chemical attacks and withstand high mechanical loads. From a technical point of view, the production of pipes and its connections has made it possible to use corrosion-resistant polymer concrete for urban wastewater management applications.\r\n\r\nPolymer concrete is a type of concrete with a polyester resin matrix. The resin provides bonding performance without the use of cement. In combination with strong quartzite aggregates, it has created high compressive and bending strength and enables the use of pipes under heavy ground loads and traffic. Casting technology ensures dimensional accuracy and smooth surfaces and turns polymer concrete into a high-performance, cost-effective, and resistant material for use in wastewater.\r\nwww.bs-eng.ir\r\n\r\nThe equipment for the production of polymer concrete pipes with a maximum diameter of 600 mm, and the length of the pipe is 3000 mm.\r\n\r\n Also, pipes for use in tunneling or open trenches are produced. This equipment allows the production of shaft elements and special polymer concrete components. Pipes are also produced for use in tunnel excavation.\r\n\r\nPolymer concrete pipes and products have significant advantages over other materials used in wastewater and corrosion-prone systems. \r\n\r\nThese advantages include: the most suitable type of pipe for piping, especially in the microtunneling method, due to its high pressure resistance against jack forces, high resistance against corrosion and exposure to acids and alkalis, as well as its high strength and longevity. The outer surfaces of the pipe are smooth, uniform and non-absorbent, which leads to a reduction in friction during the jack operation\r\n\r\nSmooth and uniform internal surfaces provide minimal loss and low friction to flow and reduce residual risk\r\nIntegrated pipe end joint system that results in uniform distribution of jack forces\r\n\r\nLong life and elimination of maintenance costs due to the integrity of the pipe structure and high mechanical, physical and chemical resistance\r\n\r\nB+S Engineering IRAN\r\n\r\nFor more information, please contact us:\r\n\r\nTehran, Africa St., Taban West, Taban Office Building, No. 14, Unit 25, Second Floor\r\n\r\nPhone: 021-8879 6640 \r\nFax: 021-8820 9374\r\n\r\nEmail: daftariali@gmail.com \r\nWebsite: www.bs-eng.ir