1- Ribbon Blender, MH600 model, with a capacity of 670 liters for preparing powder, with a three-piece flat lid. The engine power of the gearbox is 5.5 HP and the shaft speed is 45 rpm. All parts of the blender are made of stainless steel. Steel and all welds are completely polished with argon tig, and the inside and outside surfaces are completely polished. be \n
2- Fully automatic powder filling machine in plastic or cardboard cans of spiral Auger type
for filling soft and sticky powders in cans, all parts in contact with materials are made of stainless steel, with a funnel
The agitator, the spiral of the powder injector with a clutch and electromagnetic brake rotates during a certain time that determines the volume
of the powder and stops during another independent time, both of which can be adjusted by the timer.
3- Fully automatic capping machine CAPR model
for fully automatic capping, including three rotary and shot for automatic transfer of one type of lid on the container, sprocket to transfer
containers from the conveyor under the head of the corresponding cap Brochure attached. The machine has a standard 2 meter conveyor with a stainless steel body and a P.A. chain. And the independent gearbox motor is 0.5hp. 4- SA100P vertical packaging machine for packing powder in sachets. It is possible to sew three and four sides with this packaging machine. It is also possible to install the thermal date to print 3 lines of each line
with 10 digits automatically on the package. Applications: salt, sugar, spices and other soft and sticky powder materials
Packaging film: Aluminum foil, PE, PET and aluminum foil, PE, OPP and cellophane.
5- 600 liter silo
made of 3 stainless steel sheets with a valve connected to the spiral powder transfer, the height of the silo is 1250 mm, the diameter is 850 mm, and its weight is
85 kg. All welds are completely polished with argon TIG and the inside and outside surfaces are completely polished. The machine has a sensor and a timer inside the powder filling funnel for constant control of the powder level. All the related connections are included with the machine. 7-Hammer mill is made entirely of stainless steel, the way the machine works is that the powders poured through the entrance hole into a chamber that r\n has a rotor with stainless steel blades that are guided on one side smooth and on the other side with a relatively sharp edge. It passes and discharges inside the barrel. The direction of rotation of the rotor (left or right) can be controlled by the operator. Electromagnetism for HDFE, PE, PET, PETE, PETG, PVC, PP, POLY
STYRENE containers using special foil
Company | کارا صنعت |
---|---|
Tel | +98 21-4×××2700, +98 21-4×××2701 |
Mobile | +98 902×××0034 |
Whatsapp link | |
Instagram page | |
Telegram | Telegram link |
Website | https://www.karasanat.com/ |
Country | Iran |
Province | Tehran |
Address | تهران خیابان قائم مقام فراهانی، کوچه ممتاز، پلاک 7، واحد 8 |
Postal code | 1386113751 |