Sealing putty (Fugenfuller) Abadbana Company, Konaf Iran Agency (K Plus)

Sealing putty (Fugenfuller) Abadbana Company, Konaf Iran Agency (K Plus)

Gypsum coating for sealing plaster-coated plates
K Plus sealant is used for sealing plaster-coated plates. This putty is implemented together with a sealing tape and thus a reinforced and strong structure is formed. This material is applied as a thin layer with a thickness of 1 to 2 mm. Introduction and application. It is suitable for filling the joint between the floor and wall tiles in the interior and exterior of the building. \nProduct details
Compliant with national standards No. 3-10760 and 3-13007
Easy to prepare and use, just by adding water
High adhesion quality
The ability to increase the duration of use of malt\r\ nWithout cracking during setting
Manual preparation method
Low water absorption (W)
High wear resistance (A)
Surface preparation
All surfaces must be stable, clean, be uniform and free of grease, dust.
Prior to application, remove any remaining materials and excess debris from the joint that may prevent proper coating or reduce adhesion.
Mixing\ r\n- In order to make mortar, approximately 4 to 1 (by weight) ratio of Fuga powder to water is needed (about 5.1 liters of water for each 5 kg bag), it is recommended to use a mechanical mixer with low speed . Gradually add the powder to the clean water and mix until a uniform paste is obtained. Let it stand for 5 minutes and stir the mixture again. Malt should be prepared in the required amount for about an hour of use.
Effective factors in setting
The high water-to-powder ratio and long-term storage of the product increase the setting, which also affects the strength.
The presence of impurities and salts in water, high temperature (plaster , water, environment), the surface under the work is very absorbent and returning the hardened plaster residue on the tools into the mortar will reduce the setting. If the surface under the work is very absorbent, it will shorten the setting time.\r\ nHealth and safety rules
In case of contact with skin, wash with water.
In case of contact with eyes, rinse them with water and seek medical attention if necessary.
In case of swallowing, close the mouth. Wash with water and then drink water. If symptoms and problems remain after the above measures, consult a doctor.