Exposed concrete floor and wall panel

What kind of stones are called rubble?\r\n\r\nRubble or slate are so-called stones that, as they have been extracted, are used unchanged and have a completely natural structure. to be These stones have high density and their weight is heavy. The stone fragments do not have specific dimensions and are classified based on their thickness.

Aitai production group is the largest producer of xps foam in Iran\r\nxps insulation foam is the fourth generation of cold and thermal insulation in the world.\r\nNon-expandable extruded polystyrene is another name for this waterproofing.\r\nxps foam is produced in Aitay in two types, burning and slow burning\r\nFrom 1.8 to 10 cm thick\r\nxps compressed foam is 100% insulation of moisture, cold and heat\r\nCold room floor insulation\r\nRoof insulation\r\nPoultry insulation\r\nLivestock insulation\r\nwall insulation\r\nAccording to topic 19 buildings\r\nSaving more than 50% in energy consumption\r\n\r\nThe production of sandwich panel wall and false ceiling products with xps foam core is one of the innovations of Aitay company.

This detergent solution is used to remove all kinds of dandruff and grout on the surfaces of building materials. This material is a biodegradable, non-corrosive cleaning solution And it is low in odor. One of the advantages of this detergent is that it does not change the color of the substrate. This step is necessary to achieve the desired result (try without wetting to see which option gives you the best result). 2- Pour the detergent into a polyethylene or plastic container, be careful that Due to the reaction of this solution with metal containers, the use of metal containers is strictly prohibited. Then apply the solution on the surface without any dilution with a brush or all-plastic sprayer. Note that this solution is not suitable for acid-sensitive surfaces such as metal and stone surfaces. 4- Keep the applied surface wet for 20 to 30 minutes. If the surface starts to dry, repeat the clean or diluted detergent solution with twice as much water on the surface to keep the surface wet for 20 minutes. To achieve the desired result, do not use this solution in weather conditions where water evaporates strongly, for example, when there is strong wind or direct sun on the surface, it is difficult to keep the surface wet. 5- Then cover the surface with Rinse with water pressure. When this material comes in contact with cement stains, the cement stains react with the cleaning material and lose their adhesion to the facade in the presence of large cement stains with a stain spatula. Separate the cement from the facade surface. 6- In the last step, to protect the facade, apply nano-coatings on the surface. Safety items: When using the solution, use gloves, masks and goggles and avoid direct contact with skin and clothing. In case of contact with body, rinse immediately with plenty of water. Note: Always test a small part of the facade first to choose the best way to apply it. , Grout cleaner, grout grout cleaner, brick dandruff remover, brick dandruff cleaner, brick dandruff cleaner, brick cleaner

Various types of flat and multi-walled polycarbonate in new and diverse designs and colors, which can be considered as a good substitute for glass, Iranite, ceramic clay, etc., because it is unbreakable, light and sun-proof.