Customized production of putty, paint and transparent one-component anti-scratch killer (guaranteed) for foamed PVC, (waterproof sheet) based on PVC resin/glossy solvent-based acrylic (PMMA), for coating with water properties A long-lasting, long-lasting and shiny finish (without polishing) for PVC, UPVC, and especially PVC foamed waterproof sheets, which is widely used in the construction of exquisite PVC foamed laundry cabinets.\r\n - The correct process of painting the anti-shell of the PVC laundry cabinet, made of PVC foamed sheet (waterproof sheet):\r\n1- First, by adding some instant putty PRN-0465 (a product of Diaco Choub Baspar Manufacturing Company) to the putty powder, prepare some putty to putty the cut edges and sections of screws or nails, and then apply thermoplastic putty for half an hour. Rest your waterproof and at this stage you can cover a part of your waterproof with a freezer bag to prevent it from drying out.\r\n2- After a quarter of an hour of the putty, you can finish the work (sanding) of the putty before the final hardening.\r\n3- At this stage, dilute instant putty PRN-0465 (custom production of Diaco Choub Baspar Farvar Company) with instant thinner and spray it on the finished parts, note: if the surface below the work is shiny and flawless, there is no need to use putty It is not immediate or scratched for the adhesion of paint on the foamed surface, like high density sheets). Note: The biggest role of instant putty is to fill the small holes of the surface of low-quality and grade 2 foams, which prevents bubbles on the surface of the paint and possibly the final sprayed killer.\r\n4- After half an hour of drying of the instant putty and the release of gases, the instant thinner or additional mixed solvent (more appropriate) is used (when the part does not smell of thinner, which usually lasts 30 minutes at a temperature of 25 degrees Celsius) The pieces do not need to be sanded, but to get a shiny finish, you can sand the piece with water skin sanding 1000-2000-2500 and a little liquid soap so that the color under the work will have a higher quality and its effect in Show the final color and gloss of the coating.\r\nNote: After finishing the sanding and washing the part, spend more time for the final drying and for the next layer to prevent water bubbles in the deep drying of the part, because the foams absorb about 15-20% of water, due to the large amount of calcium carbonate that is recently in It is made of foamed PVC and is used to reduce costs.\r\n5- At this stage, spray the primer and paint, which is made of low-gloss PVC base or glossy and anti-scratch solvent-based acrylic depending on the customer's choice (to dilute the color and keep it shiny, it is better to Use the additional thinner of the company, otherwise, use the instant thinner 20000 and above to make the coating more shiny) This step does not need to be paid.\r\n6- At the last stage, after the maximum of 2 hours has passed since the paint coating has dried, it is the turn of the killer matte/shiny anti-scratch nano technology acrylic solvent-based PRCN-14250 (custom production of Diaco Wood Company), which does not need to be paid for.
Alborz
20 Apr 2025