-
در بخش Sell Offers، دسته بندی Mechanized irrigation، Province North Khorasan موردی پیدا نشد.
دسته بندی Mechanized irrigation را امتحان کنید.-
Design and implementation of drip and sprinkler irrigation system
Today, due to the importance of irrigation and the lack of water resources, the correct implementation of the irrigation system in every way can be effective in optimal water consumption. Certainly an irrigation system that is correct If it is not done with the necessary standards, not only does it not help to solve the problem of dehydration and water needs of the plant, but it will definitely cause serious damage to the plant and will result in loss of energy and cost. Taf Ab Gostar Alborz Company is proud to help you. Implementation of the most optimal and appropriate irrigation system helped
Mechanized irrigation Tehran -
"Drip irrigation tape" (type)
Irrigation tape (type) is a type of valve for drip irrigation, which was first produced about 50 years ago in the United States. Type strips are very suitable for drip irrigation of dense and row crops. Type tape is used for drip irrigation of vegetables, summer crops, row crops, fodder and… such as watermelon, tomato, onion, potato, corn, strawberry and greenhouse crops. Drip irrigation tape or the same type (Tape) is suitable for drip irrigation on shallow surface and subsurface. For deep subsurface irrigation, the use of dropper pipes is recommended. C-Plast type tape is suitable for drip irrigation of potatoes, corn and the like. Type tape is made of polyethylene and usually each coil is a few hundred meters (1000 to 3000 meters). Unlike hard polyethylene pipe, the tape is very soft. In fact, the type tape has a soft and flexible material that fills when water enters it, and after the end of irrigation, the type tape becomes flat again. The wall thickness of the type tape is very thin and is usually between 0.1 and 0.6 mm (each 0.1 mm is called 100 microns). Thicker bristles are usually used for subsurface irrigation of various plants. Draperies on the type bar are also called license plates. The distance between the drippers in the irrigation strip is different and usually between 10 and 60 Applications of the type tape From the type tape for drip irrigation of row and seasonal crops such as tomatoes, peppers, potatoes, strawberries, onions , Used sunflower, melon, watermelon, sugar beet, corn and other weeds. Drip irrigation tape can also be used in greenhouses. Advantages of using drip irrigation tape (type tape) Drip irrigation tape can be used in most lands and weeds. Type tape does not require much water pressure and can be used on farms with limited height and height without the need for land leveling. Also, the type strip can be installed mechanically during cultivation using a tractor. The most widely used type of irrigation strip in terms of distance between the dripper are 20 and 30 cm strips
Mechanized irrigation Tehran -
Rental of polyethylene welding machine in different sizes
Taf Ab Gostar Alborz Company intends to cooperate with contractors and operators of water and sewage basin, its tools including polyethylene welding machine and accessories and all the necessary tools to Provide daily and weekly face to these loved ones . For more information, contact us. Taf Ab Gostar Alborz Company, with its specialized and trained personnel, benefiting from polyethylene welding techniques, and technical and engineering support for any design services Performs calculations, welding and installation of polyethylene systems all over the country. Rental of tools, Rental of polyethylene welding machine, Rental of bot fusion welding machine
Mechanized irrigation Tehran -
Wei 60 adjustable brass sprinkler
: spraying radius 14 to 18 meters / connection 3/4 male / operating pressure: 3 to 4 atmospheres Brass body material / adjustable spraying 20 to 360 degrees / hammer sprinkler all round: Spraying radius 14 to 18 meters / Male connection 3/4 / Flow rate 1250 to 3200 liters per hour / Operating pressure 3 to 4/2 atmospheres / Cast iron body material / All round Virsa sprinklers It is available in various models with low, medium and high throw radii in the market, and the main purpose of these sprinklers is in the field and green space. Types of Vyrsa crop sprinkler models are Vyrsa35, 36, 50, 80, 60, 66, 150, 155. Atmosphere Brass body material Adjustable spraying 20 to 360 degrees Hammer sprinkler full round: Spray radius 14-18 meters Male connection 3/4 discharge 1250 to 3200 liters per hour Operating pressure 3 to 2/2 atmospheres Cast iron body all round "0102030405 "Brass sprinkler, Weir sprinkler, Weir adjustable sprinkler, Weir 60 sprinkler, 60 adjustable brass sprinkler, Impact sprinkler, Farm sprinkler" 0102030405 "
Mechanized irrigation Tehran -
Aytok irrigation disk filter
Itok disc filter consists of a polyamide housing, which inside this housing consists of several plates or discs on top of each other, and there are grooves on the discs, where algae, weeds and other impurities are trapped between the grooves. And water purification is done. The discs are placed concentrically on a rod. Aytok is one of the Turkish brands and is one of the most popular brands among farmers. Itok Bay disc filters are used to separate water from biological substances and suspended particles in drip irrigation. Disc filters with ultra-narrow grooves on the discs capture very fine particles and substances suspended in water.
Mechanized irrigation Tehran -
Hunter concealed sprinkler nozzle for sale - model psu
Hunter sprinkler nozzle: 10A, 12A, 15A, 17A and 4A, 6A, 8A, which are sold separately (separate nozzle and separate body). [Hunter nozzles are distinguished by different colors. Also, each number - for example, 10 - indicates the radius of the sprinkler spray at the foot scale. Each foot is about 30 centimeters. This means that the Hunter 10A sprinkler has a spray radius of about 3 meters.] Sprinkler flow range: 0 ٫ 8 to 20 ٫ 1 liter. It is convenient. Also, one of the most important features of the sprinkler is that its water spray arc is adjustable. R in minute
Mechanized irrigation Tehran -
Drip irrigation pipe with drip irrigation
Drip irrigation pipes are polyethylene pipes and are mainly made in 16 and 20 mm sizes. Today, due to the excessive reduction of the country's water resources and the tendency of farmers to The use of drip irrigation technology has led manufacturers to make every effort to facilitate the installation and high efficiency of irrigation equipment. Drip hoses with different distances and uniform flow and pressure control eliminate the hassle of installing drippers on irrigation pipes, and especially in farms and gardens with regular cultivation arrangement is very useful
Mechanized irrigation Tehran -
Sale of all irrigation equipment and supplies
Sale of all irrigation equipment, including: all kinds of concealed, percussive and all-round irrigation sprinklers, all kinds of drippers in different Iranian and foreign brands with different discharges, hard polyethylene pipes And soft with different operating pressures with the best materials, fertilizer tanks in different volumes from the best Iranian and foreign brands, smart and mechanical irrigation timers with different brands, 4, 6, 8 and 12 mm macaroni pipes, Iranian and foreign drip pipes, Types of irrigation tapes with different sizes in two types of Iranian and foreign with the best quality, screw and welded polyethylene fittings, solenoid valves in different sizes, irrigation filters, automatic filtration, types of mesh and disc filters with the best and most important Brands, types of irrigation controllers 4, 6 and 8 stations with booster kits, etc. can be provided in general and in part
Mechanized irrigation Tehran
Similar Products
-
