Energy Gas Heater Model GH640.GE German Fan

Selection of Iranian fans\r\n\r\n Managed by Ali Mirzazadeh \r\n\r\n\r\n\r\n\r\n Ways to contact us\r\n\r\nSite \r\nhttp://gozidehfaniranian.com\r\n\r\nWith WhatsApp / Telegram 989193772561\r\n\r\nfactory \r\n\r\n982136445252\r\n982136424453\r\n982136428992\r\nInstagram Telegram gozidehfan-iranian @\r\n\r\nEmail: gf.iranian1152@gmail.com\r\n\r\n\r\n\r\n\r\nThe largest manufacturer of air ventilators in Iran with the best quality\r\nTwo galvanized sheet bearing heads\r\n Air ventilators\r\n\r\nAmong the most used fans in factories and industrial sheds. Warehouses, livestock farms, poultry farms, commercial/residential complexes. Due to the lack of need for electrical energy, the sanitary facilities etc., air ventilators can be installed on sloping or flat surfaces and create suction while using wind power. Air ventilators are designed and built in such a way that even in If the aerator is fixed, rain water does not enter the channel and the place where it is installed.\r\n Application of air ventilator\r\n\r\nSuitable for air conditioning of industrial halls, warehouses, livestock farms, poultry farms, commercial complexes, hospitals and residential...\r\nIt is used for different purposes and brings fresh air into the work environment to control humidity and create flow and to remove unpleasant odors and air.\r\nThey say outside, and with the entry of clean air in the environment, it guarantees health and the environment\r\n\r\n\r\nAir ventilator selected by Iranian fans without the need for electrical energy and...\r\n\r\n\r\nSelection of Iranian fans\r\nAir vent sizes\r\nFrom 10 cm to 100 cm according to the request of our respected customers\r\n\r\n Modern smoke hood (Japanese) selected by Iranian fans \r\nThe modern (Japanese) (Chinese) (cottage) chimney hood is one of the most practical types of fireplace and chimney hoods, which, due to its unique design, receives the special attention of building architects and customers. Due to its structure and design, this cap has a simple installation and is compatible with most environments. In addition, it is a suitable option to get approval from the organization of gas administration and engineering system. Japanese hoods with a special and precise design prevent the return of air into the building and prevent insects and particles from entering the chimney.\r\n\r\n Damper \r\n Interchannel\r\n Weighted air balance\r\n fireproof \r\nDampers are critical components in air conditioning, heating and cooling systems used to control air flow in ducts and ventilation systems. These devices help improve system efficiency, regulate temperature and humidity, and reduce energy consumption by fine-tuning and controlling air flow. Dampers generally consist of blades or vanes that adjust the amount of air flow by changing their angle.\r\nDampers can be made in different shapes and types, each of which is suitable for specific applications. For example, motorized dampers are used to automatically adjust airflow in complex air conditioning systems, while manual dampers are typically used in simpler systems where frequent adjustments are not required.

Impeller Diameter 310 Motor Speed 2800 (RPM) Airflow 7200 (cubic meters) Voltage 220 – Single Phase Motor Power 2237 W Connection Type: Direct Centrifugal Type: Backward Motor Type: Motogen 310 Backward Centrifugal Fan 2800 RPM Single Phase The centrifugal fan's name is derived from the flow direction and how air radially exits from the impeller to the outer range. The backward centrifugal fan is cylindrical in shape, with several large curved blades and a conical inlet nozzle. The 310 backward centrifugal fan running at 2800 RPM requires electricity to operate. Features of the 310 Backward Centrifugal Fan 2800 RPM As the fan rotates, it creates a pressure difference on the impeller blades. On the convex side of the impeller blade, a positive pressure forms as the rotational driving force of the impeller in the air. The impeller blades guide the air outward and in a radial direction. On the concave side of the impeller blade, negative pressure is created that draws air from the space between the blades. The impeller of the 130 backward centrifugal fan at 2800 RPM is made of metal with an electrostatic paint coating. Air is taken by the blades and continuously expelled radially. The suction side of the impeller receives air from the center of the fan, causing a 90-degree change in the air flow direction between the exhaust and the outlet. The optimal operating area for the backward centrifugal fan is a region in the mid-range of its operating area. Centrifugal fans need medium pressure and high volume; a backward centrifugal fan produces the highest volumetric flow. If resistance to flow is applied at the fan's suction or outlet, the volumetric flow decreases. The advantage of using a backward impeller motor is the absence of an undefined point on the fan characteristic curve, meaning each point on this curve has a specific operating performance. Backward motor impellers also possess the highest static efficiency among all fan types and mechanisms used in airflow, meaning it can be placed within a scroll to guide airflow. The 310 backward centrifugal fan at 2800 RPM single-phase motor has an airflow capacity of 7200 cubic meters per hour, and its electromotor brand is Motogen.

Impeller Diameter 250 Motor Speed 2800 (RPM) Airflow 1400 (cubic meters) Voltage 220 – Single Phase Motor Power W 1118 Connection Type: Direct Centrifuge Type: Backward Motor Type: Motogen The name of the centrifugal fan comes from the direction of flow and how the air exits radially from the outer area of the fan impeller. The backward centrifugal fan has a cylindrical shape, several large curved blades, and a conical inlet nozzle. The 250 Backward 2800 RPM Single Phase centrifuge requires single-phase power and its motor speed during operation is 2800 RPM. 250 Backward 2800 RPM Single Phase centrifuge As the fan rotates, it creates a pressure difference on the impeller blade. On the convex side of the impeller blade, a positive pressure is created as the rotational driving force of the impeller, generating airflow. The impeller blade directs the air outward in a radial direction. On the conical side of the impeller blade, negative pressure is created, drawing air from the space between the blades. The impeller of the 250 Backward 2800 RPM Single Phase centrifuge is made of metal with an electrostatic paint coating. Air is taken by the blade and expelled radially in a continuous process. The suction part of the impeller blade receives air from the center of the fan, causing the airflow direction to change by 90 degrees between the exhaust and outlet. The optimal operating region for the backward centrifugal fan is a zone in the middle of its operational range. The centrifugal fan requires medium pressure and high volume. A large backward centrifugal fan produces the greatest volumetric flow. If resistance is applied against the flow towards the suction or outlet of the fan, the volumetric flow decreases. The advantage of using a backward blade motor is that there is no undefined point on the fan's characteristic curve, meaning each point on this curve has a specific performance. The backward motor impellers also have the highest static efficiency in any type of fan and mechanisms used in airflow, meaning they can be placed inside a scroll to guide airflow. The 250 Backward 2800 RPM Single Phase centrifuge has a flow rate of 7200 cubic meters per hour, and its electric motor brand is Motogen.

Backward Centrifugal Fan 800 1400 RPM Three-Phase The name centrifugal fan is derived from the direction of flow and how air moves radially from the outer range of the fan impeller. The backward centrifugal fan is cylindrical in shape, with several large curved blades and a conical inlet nozzle. The backward centrifugal 800 fan 1400 RPM Mobnafan requires electricity to operate, and its motor speed during operation is 1400 revolutions per minute. Features of the Backward Centrifugal Fan 800 1400 RPM Mobnafan As the fan rotates, it creates a pressure difference on the blades of the impeller. On the convex protruding side of the impeller blade, a positive pressure as the driving rotational force of the impeller is generated in the air. The impeller blades direct the air outward and position it radially. On the conical side of the impeller blade, negative pressure is created that pulls air from the space between the blades. The material of the impeller of the Backward Centrifugal Fan 800 1400 RPM Mobnafan is metal coated with electrostatic paint. Air is taken by the blades and expelled radially in a continuous process. The suction part of the impeller blade receives air from the center of the fan which leads to changing the airflow direction between the exhaust and the outlet by 90 degrees. The optimal operating range for the backward centrifugal fan is a zone in the middle of its operational range. The centrifugal fan requires medium pressure and high volume; a backward centrifugal fan produces the largest volumetric flow. If resistance is applied against the flow at the suction or outlet side of the fan, the volumetric flow rate decreases. The advantage of using a backward impeller motor is that on the fan characteristic curve there is no undefined point, meaning every point on this curve has a specific performance. The backward impeller motors also have the highest static efficiency among all types of fans and airflow mechanisms, meaning it can be placed inside a scroll to guide the airflow. The Backward Centrifugal Fan 800 1400 RPM three-phase Mobnafan has an air volume of 7200 cubic meters per hour and its electromotor brand is Motogen. Impeller diameter 800 Motor speed 1400 (RPM) Airflow 7200 (cubic meters) Voltage 380 – three-phase Motor power 2237 W Connection type: direct Centrifugal type: backward Motor type: Motogen

The number of 4 snails is used. It is almost new\r\nVoltage consumption 220 volts \r\nIt has blowing power\r\nIt has four high, medium, low and off speed modes\r\nCopper coil material\r\nAluminum coil protective body \r\nThe material of the fan body is compressed plastic, the material is soft raw materials

Green Split Green Duct Duct\r\nDuct Split 24,000 Green_Dack Split 24,000 Green\r\nDuct Split 30,000 Green_Dack Split 36,000 Green\r\nDuct Split 48,000 Green_Dack Split 60,000 Green\r\n5 years of corporate warranty\r\nSuitable and compact dimensions for installation beneath the false ceiling\r\nGreen Channel Split is equipped with air purifier filter\r\nAbility to change the back or sub -air of fresh air from the back or under the device equipped with a touch screen with a touch screen and the installation of smart thermostat equipped with the TWIN Rotary Compressor Hitachi Brand\r\nAbility to install air valve directly or as channel\r\n5 years of compressor warranty, 2 years of technical parts guarantee and 10 years of after -sales service\r\nProduct of Italy\r\nSend to all over the country