Insulation Nano pool

Shingle is one of the most common coverings for sloping roofs. This cover is executed by smooth and colored sheets. The shingles available in the market are with a galvanized sheet core or bituminous core, and their top is covered by different materials.\r\nBy producing U.P.V.C. shingle sheets, this company has launched a new product with a better price than similar sheets by solving the problems of shingles in the market.\r\nShingle sloping roof has high resistance against natural factors, especially wind. Shingle covers are resistant to wind with a speed of 130 km/h. But this number is different according to different geographical areas. Shingle covers have good resistance in different climates. In hot areas, according to the insulation and osb board under the work, it can prevent heat from entering the building. And it also helps to keep the interior of the building cool by reflecting the sunlight, and in snowy and snowy areas, the snow easily slides over it. Shingle covers can be used in different architectures. And it is resistant to external sounds and prevents the entry of noise to a significant extent. And it is resistant to external sounds and prevents the entry of noise to a significant extent.\r\nhttp://varna-group.com/shingle-sheet/\r\n\r\nFor more information and to register an application, please refer to the contact information at the bottom of the ad.

This detergent solution is used to remove all kinds of dandruff and grout on the surfaces of building materials. This material is a biodegradable, non-corrosive cleaning solution And it is low in odor. One of the advantages of this detergent is that it does not change the color of the substrate. This step is necessary to achieve the desired result (try without wetting to see which option gives you the best result). 2- Pour the detergent into a polyethylene or plastic container, be careful that Due to the reaction of this solution with metal containers, the use of metal containers is strictly prohibited. Then apply the solution on the surface without any dilution with a brush or all-plastic sprayer. Note that this solution is not suitable for acid-sensitive surfaces such as metal and stone surfaces. 4- Keep the applied surface wet for 20 to 30 minutes. If the surface starts to dry, repeat the clean or diluted detergent solution with twice as much water on the surface to keep the surface wet for 20 minutes. To achieve the desired result, do not use this solution in weather conditions where water evaporates strongly, for example, when there is strong wind or direct sun on the surface, it is difficult to keep the surface wet. 5- Then cover the surface with Rinse with water pressure. When this material comes in contact with cement stains, the cement stains react with the cleaning material and lose their adhesion to the facade in the presence of large cement stains with a stain spatula. Separate the cement from the facade surface. 6- In the last step, to protect the facade, apply nano-coatings on the surface. Safety items: When using the solution, use gloves, masks and goggles and avoid direct contact with skin and clothing. In case of contact with body, rinse immediately with plenty of water. Note: Always test a small part of the facade first to choose the best way to apply it. , Grout cleaner, grout grout cleaner, brick dandruff remover, brick dandruff cleaner, brick dandruff cleaner, brick cleaner