Rolls and bags of polypropylene sacks

Aluminum anodizing services according to the MIL8625 standard in three soft, hard, normal and chromic\r\nTitanium anodizing services\r\nHard anodizing 2024 as a specialty\r\nPolishing and allodyne aluminum\r\nHard anodizing services for parts of the textile, medical and automotive industries\r\ Hard anodizing of special parts \r\n Chromic anodizing

Hard anodizing services of aluminum alloys\r\nMatte and glossy color anodizing services\r\nTitanium anodizing services\r\nHard anodized black and silver\r\nAllodyne and aluminum polish\r\nInstallation, consultation and commissioning of anodizing lines\r\nAnodized bronze and champagne\r\nProviding anodized colors with Glarint brand\r\nHard anodizing industrial parts up to 7 meters long\r\nGlossy and matte color anodization of Glarint brand

Primer PRC041 and MDF waterproofing thermoplastic paint for covering the surfaces and cutting section of MDF for painting the CNC cutting section instead of using PVC tape - to waterproof the cabinet and the panel on the cabinet, which can be used completely instead of PVC tape. It can be used before applying the PVC strip, the latter not only prevents water from penetrating from the taped area, but also causes the PVC strip to adhere much more to the cut section. Baspar wood for sealing the cutting area of ​​coated MDF used in making the cabinet body.\r\nMethod of Use :\r\n1- Pour the PRC041 primer into a small paint tray and use a five-centimeter roller to coat the cut or CNC sections of the MDF well so that the transparent primer penetrates into the dry section of the MDF like water. After 10-15 minutes, the primer has dried and by exposing the MDF to water, it can be seen that the water does not penetrate inside the MDF in any way, and if this impregnation is repeated, the product\'s water repellency will reach its final limit.\r\n2- If there is a need to match the decorative color to cover the MDF CNC cutting area with the top coating color, PRC141 thermoplastic coating paint can be used, which, like its primer, is made of reinforced PVC material, and the cut section with The top color is the same and completely resistant to the penetration of water, acid, and detergents. It can even be used for painting double and milled cabinet panels. This color will give you a good surface of PVC on the processing area.\r\nWaterproofing of MDF and kenaf by PRC041 Diaco wood primer - waterproofing of CNC cut section - cold PVC tape - liquid PVC tape for MDF - strong waterproofing agent and resistant to changing the color of the sun and water penetration and Detergents and petroleum products - waterproofing of wooden concrete forms - waterproofing of wooden or MDF facade - liquid PVC tape - replacement of PVC tape - painting of CNC wood cutting - replacement of PVC tape for CNC cutting. Waterproofing MDF - waterproofing MDF - waterproofing wood - waterproofing materials for wood and MDF and chipboard. Waterproofing Kenaf gypsum sheets and ceiling tiles.

**[RTR capacitor 40KVar 440V\r\n**](https://www.automation24.ir/product-2888/%25D8%25AE%25D8%25A7%25D8%25B2%25D9%2586-%25D9%2585%25DA%25A9%25D8%25B9%25D8% 25A8%25DB%258C-rtr-40kvar-440v)\r\nCapacitor:\r\n\r\nA capacitor is an electrical device that can store electrical charge and electrical energy, in fact, the capacitor in electrical circuits stores electrical energy in an electrostatic field, which is called the capacitive effect.\r\nCapacitor structure:\r\n\r\n1- Conductor plates\r\n\r\n2- Insulation between conductors (dielectric)\r\n\r\nCapacitors are made up of at least two conductor plates that are parallel and there is a layer of air or insulation in between. Capacitor conductor plates are usually made of aluminum, silver, and zinc, and air, paper, mica, plastic, ceramic, aluminum oxide, and tantalum oxide are used as insulating materials between the plates.\r\n\r\n**[Click here to buy the product](https://www.automation24.ir/)**\r\n\r\nUses :\r\nCapacitors have a relatively wide application. Among the uses of capacitors, we can mention timing circuits with resistors, balancing the level of direct voltage changes, and also as a filter in circuits, because capacitors easily pass alternating signals, but prevent the passage of direct signals. Considering that the electric charge is stored in the capacitor, the capacitor can also be used to create uniform electric fields. Capacitors can hold electric fields in small volumes.\r\n\r\nCapacity:\r\nCapacity is a measure of the ability to store electrical energy. High capacity means that the capacitor is able to store more electrical energy and its measurement unit is Farad. 1 farad is a big unit and it is a high capacity specification, so it is customary to use smaller units such as micro farad, pico farad and nano farad in capacitors.\r\nTypes of capacitors:\r\nCapacitors have a lot of variety that we describe the most important types of capacitors that are used today.\r\n1- Variable capacitors and trimmers\r\n2- Ceramic capacitors\r\n3- Mica capacitors\r\n4- Polyester capacitors\r\n5- Paper capacitors\r\n6- Wax and oil capacitors\r\n7- Electrolytic capacitors\r\n8- Tantalum capacitors\r\n9- Mylar capacitors\r\nImportant points in buying a capacitor:\r\n\r\nConsidering the variety of capacitors available in the market, one of the concerns of consumers is always to find a type of capacitor according to their needs, therefore, we will state some of the points that should be considered when buying a capacitor.\r\n\r\n1- Attention to the capacity of the capacitor\r\n\r\n2- Ability to withstand charge and discharge currents\r\n\r\n3- Service life\r\n\r\n4- leakage current\r\n\r\n5- Dimensions\r\n\r\n6- Frequency\r\n\r\n7- Price

Daniel Plastic is a manufacturer of finger mobile phone holders, and if you intend to buy this product in bulk, you can contact Daniel Plastic Collection.\r\nDaniel Plastic finger mobile phone holder is an extremely attractive and practical product that is produced in attractive pink, pastel pink, purple and black colors.\r\n\r\nThe finger mobile phone holder is produced in double packs and with its unique design, it is easy to hold and the mobile phone can be easily placed on this mobile phone holder.\r\n\r\nThis finger mobile phone holder, in addition to having a beautiful appearance and making the mobile phone fit well on the hand, reduces the possibility of the mobile phone falling by 60%.\r\n\r\nThe interesting thing about Daniel Plastic\'s dual digit mobile phone holder is that this holder is compatible with all mobile phones of different sizes.