Salty sand. Salty sand

Technical specifications of 60-liter dehumidifiers with condenser\r\nproduced with 304 steel sheet approved by the food industry\r\nfrom 10-liter to 1000-liter sizes\r\ncapable of deodorizing all medicinal plants, rose water, etc.\r\ It has a condenser and a cooler. It is completely sealed. Easy to carry. r\nwith 304 and detachable steel pipe and fittings\r\nHow to prepare vegetable sweats with Esoeh condenser sweat traps\r\nWe put one-third of the water and two-thirds of the desired plant in the boiler and wait. to boil The steam from the boiler enters the condenser. The cooling system causes the vapor inside the condenser to turn into a liquid during the condensation process. The liquid resulting from this process is the sweat of the plant.

Green Azin importer of culture medium Made of country: India Made of materials: organic Packing weight: 5 kg Sterilized: Yes Cocopit salinity: less than 0.5 mm / cm (does not need to be washed.) . CocoPit is produced in compressed molds. Compressed cocopeat after being in water and absorbing moisture, can be converted into 70-75 liters of wet cocopeat, which depending on the size of the pot and the type of plant, you can do it alone or mixed with other planting media such as perlite, peat moss, sawdust. And ... put it in a pot. CocoPit Fine is fiber-free and has a fine texture. This type of coco peat is used in the production of seedlings.

The fruit drying machine of Isfahan Hirad Machine Company can be considered as an example of the best dryers manufactured in the country.\r\n\r\nIndustrial capacities of 100 kg, 200 kg, 400, 600 kg and 800 kg cabin\r\n\r\nThe quality of the output product of these devices, without the need to use all kinds of syrups, acids, and preservatives in terms of aroma, color, and taste, is one of the determining factors in proving its superiority.\r\n\r\nOne of the most widely used, cheapest and best methods for drying all kinds of fruits and vegetables, saffron, garlic and shallots, onions, elderberries, grain sprouts, jujubes, mushrooms, okra, ganoderma, lavash, meat and shrimp, herbal medicines, Curd, oak, etc., is the use of devices that work with hot air circulation.\r\n\r\nIn this system, without the need for a fan, the hot air controlled from the side of the oven by a powerful centrifuge passes horizontally through the contents of all the trays, and then it is directed out of the device along with the moisture taken from the fruits. to be\r\n\r\nThe source of heat production in the dryers of Hirad Machine Company is the result of burning gas, diesel or electricity, which is designed and manufactured according to the customer\'s request. Due to the fact that the wall of the device instead of being made of iron (ordinary steel) is made of two-sided galvanized (both sides, both sides), it has a layer of industrial thermal insulation (condensed rock wool) with a thickness of 7 cm. The three-centimeter space of the walls prevents the loss of heat and time and the increase of fuel. It has great heating. The three-centimeter wall and 7-centimeter insulation inside it significantly reduces heat loss, and as a result, fuel consumption is greatly reduced and the work environment is prevented from heating up.

The fruit drying machine of Isfahan Hirad Machine Company can be considered as an example of the best dryers manufactured in the country.\r\nThe quality of the output product of these devices, without the need to use all kinds of syrups, acids, and preservatives in terms of aroma, color, and taste, is one of the determining factors in proving its superiority.\r\nOne of the most widely used, cheapest and best methods for drying all kinds of fruits and vegetables, saffron, garlic and shallots, onions, elderberries, grain sprouts, jujubes, mushrooms, okra, ganoderma, lavash, meat and shrimp, herbal medicines, Curd, oak, etc., is the use of devices that work with hot air circulation.\r\nIn this system, without the need for a fan, the hot air controlled from the side of the oven by a powerful centrifuge passes horizontally through the contents of all the trays, and then it is directed out of the device along with the moisture taken from the fruits. to be\r\nThe source of heat production in the dryers of Hirad Machine Company is the result of burning gas, diesel or electricity, which is designed and manufactured according to the customer\'s request. Due to the fact that the wall of the device instead of being made of iron (ordinary steel) is made of two-sided galvanized (both sides, both sides), it has a layer of industrial thermal insulation (condensed rock wool) with a thickness of 7 cm. The three-centimeter space of the walls prevents the loss of heat and time and the increase of fuel. It has great heating. The three-centimeter wall and 7-centimeter insulation inside it significantly reduces heat loss, and as a result, fuel consumption is greatly reduced and the work environment is prevented from heating up.

The fruit drying machine of Isfahan Hirad Machine Company can be considered as an example of the best dryers manufactured in the country.\r\nThe quality of the output product of these devices, without the need to use all kinds of syrups, acids, and preservatives in terms of aroma, color, and taste, is one of the determining factors in proving its superiority.\r\nOne of the most widely used, cheapest and best methods for drying all kinds of fruits and vegetables, saffron, garlic and shallots, onions, elderberries, grain sprouts, jujubes, mushrooms, okra, ganoderma, lavash, meat and shrimp, herbal medicines, Curd, oak, etc., is the use of devices that work with hot air circulation.\r\nIn this system, without the need for a fan, the hot air controlled from the side of the oven by a powerful centrifuge passes horizontally through the contents of all the trays, and then it is directed out of the device along with the moisture taken from the fruits. to be\r\nThe source of heat production in the dryers of Hirad Machine Company is the result of burning gas, diesel or electricity, which is designed and manufactured according to the customer\'s request. Due to the fact that the wall of the device instead of being made of iron (ordinary steel) is made of two-sided galvanized (both sides, both sides), it has a layer of industrial thermal insulation (condensed rock wool) with a thickness of 7 cm. The three-centimeter space of the walls prevents the loss of heat and time and the increase of fuel. It has great heating. The three-centimeter wall and 7-centimeter insulation inside it significantly reduces heat loss, and as a result, fuel consumption is greatly reduced and the work environment is prevented from heating up.

Hirad cabinet dryers with the ability of a sitcooler system\r\nIt allows that\r\n1- The output of the product should be a natural and constant color\r\n2_ The drying time of the product is shorter\r\n3- In this system, compared to the design of the air circulation with the fan, the fuel consumption is greatly reduced\r\nIn the rest of the article, I will explain the reasons\r\nThe air circulation is done by the centrifuge, in such a way that fresh air (through the air inlet valve) and hot air (furnace) are sucked through the centrifuge and enter the air channel, here the hot air and fresh and cool air are uniform inside the channel. and when it enters the dryer cabin, a warm and uniform air is produced and enters the cabin with strength\r\nInside the cabin, the vents (for the entry of hot air) are located in front of the baskets, and hot and high-pressure air enters the device linearly and in a circular mode.\r\nSo far, I have explained how the system of the Hirad car dryer is done\r\nBut what is the good of this?\r\nThis system helps the moisture of the product to leave the cabin without interruption and easily, and the color of the product remains natural\r\nBecause there is warm and uniform air inside the cabin, the cabin reaches the desired temperature in a short period of time\r\nThe temperature adjustment system of the dryer turns off the burner and reduces fuel consumption, and because the cabin heats up easily and the moisture is easily removed, these things help to shorten the drying time of the product.\r\nAnd this is in contrast to the heating system with a fan, where hot air enters the cabin in an irregular and scattered manner, which causes the moisture of the product to be placed inside the diffuser and on the product again, and this causes the product to darken and also not dry evenly.

Manufacturer of a full line of stone crusher, batching, sand, feeder, jaw, cubit, hydrocon, sand maker, dryer, salt sand, conveyor, and supply of spare parts.