Solar gear فلنچدارباخروجی هزارخاری pistils (FS)

The bearing is the name of the part that is located between the piston handle and the crankshaft, and its job is to smooth the movement of these two parts on each other.\r\nBearings are in contact with engine oil and perform important tasks. The oil is to it and it is actually the main problem in the engine lubrication system.\r\n\r\n\r\nAnsari Store\r\nProvision and distribution of all kinds of bearings for industrial, road construction, agricultural, riding, etc. machines.\r \nAddress: Ekbatan St., Ahin Alley, Amin Commercial Complex, 1st Floor, No. 34\r\nPhone: 33117084-33956395

Sale of T50 mesh office chair\r\n\r\n 36 months unconditional warranty\r\n suitable for \"management, staff and expert\" workplaces\r\n Suitable for use by those active in the field of financial markets\r\n Suitable for furnishing stylish offices\r\n Black lace color\r\n Shipping nationwide\r\nImported product\r\n\r\n### Unique features:\r\n Bracketed synchronous seat mechanism\r\n 5 movable feet with nickel chrome plating\r\n Washable lace back material\r\n Cold foam seating material\r\n Adjustable handles\r\n Locked back\r\n The height of the jack is 120 mm\r\n Adjustable headrest\r\n Adjustable back rest\r\n\r\n### What is the bracketed synchronous mechanism in office chairs?\r\nThe bracketed synchronous mechanism in the chair is an adjustable type of mechanism that is used to synchronize the movements of the chair with the movements of the user\'s body. This mechanism allows the user to simultaneously and harmoniously adjust the seat back, seat, and even the neck in a way that provides the best comfort.\r\nBeing bracketed means that the mechanism includes additional supports or brackets that are used in different settings and allow the user to adjust the seat angle, back height, and other features as desired.\r\nThis type of mechanism is usually used in high-quality executive or employee chairs so that users can have the best sitting experience during working hours.\r\n### What does head rest and back rest mean in office chairs?\r\n\"Adjustable headset\" or \"Adjustable headset\". Headrest here refers to the adjustable height of the back of the seat. In other words, this feature allows the user to adjust the height of the back of the chair according to their height. These adjustments are usually made with mechanisms located on the base or back of the chair.\r\nIn other words, the adjustable headrest allows the user to determine the height of the upper and back parts of the chair according to their height and physical structure. This feature is located at a height between the neck and the spine and is important to provide support and comfort to users.\r\nIn the case of \"backrest\" or \"back support\" you refer to the back of the chair or the back part, which can be adjustable and support the back area of ​​the body. This feature plays an important role in providing support and comfort to users while using the chair.\r\n\r\n\r\n\r\n[Watch the movie of T50 chair in Aparat] (https://www.aparat.com/v/EdomR)

## Revitalize your brake discs with Disca in-situ disc grinder: powerful, precise and durable!\r\nLooking for an affordable and hassle-free way to fix the vibration and roughness of your brake discs?\r\n\r\n** Disca in-situ disc cutter is an ideal solution for you! Using advanced technical specifications and a unique design, this device sharpens your brake discs with unparalleled precision and finesse, and significantly improves braking performance.**\r\n\r\nWheel brake disc surface wear, warping and pitting are all factors that have negative effects on car ride. Car brake discs lose their initial efficiency over time and get damaged. This is what makes us feel the sound of the brake disc when braking.\r\nThe friction between the brake pads and the disc may cause these vibrations and failure of the car brake disc, which are caused by many reasons, such as dust, environmental pollution, or rust on the disc surface. In many cases, after checking for repair or replacement of the brake disc, there is no need to replace it, and you can use a useful and efficient tool to fix these defects, which has been introduced to the world and Iranian market today. In the car repair shops, they can smooth the surface of the car disc with the help of an in-situ disc grinder so that finally the braking performance of the wheels returns to the desired state.\r\n\r\n### Outstanding technical specifications of Disca in-situ disc grinder:\r\n\r\n1. **Ability to use 220V single-phase electricity** to power the device and the ability to start the device head even with 12V car electricity\r\n2. All-alloy and impact-resistant steel structure: Disca uses the highest quality raw materials in the manufacture of its products, and no cast iron is used in the structure of the device.\r\n3. **Ability to grind the brake disc of all passenger cars, SUVs and semi-heavy cars**: This device can be used for a wide range of cars.\r\n4. **Using a ball screw**: This type of screw prevents the accuracy of the device from decreasing over time and brings smooth and silent operation.\r\n5. **Intelligent board to adjust the forward and backward speed**: Using this board, you can precisely control the precision of the lathe.\r\n6. **Ability to grind both sides of the disk simultaneously with accuracy and tolerance of 0.001**: This device has the highest level of accuracy in disk grinding.\r\n7. **Disc balancing feature with hub**: Using this feature, you can completely eliminate the vibration caused by disc imbalance.\r\n8. **Having an automatic cut-off sensor with a buzzer at the end of work**: This sensor ensures the safety of the user while using the device.\r\n9. Automatic, semi-automatic and manual grinding: This machine gives you the necessary flexibility to grind the disk in the way you want.\r\n10. **with cut-off sensor and E-Stop key**: These sensors are installed to increase safety during operation.\r\n\r\n### By choosing Disca in-situ disc cutter, you will benefit from the following benefits:\r\n\r\n**Cost Reduction**: Compared to replacing brake discs, DiscT

Petro Rahan Pump Technical Engineering Company, as one of the prominent manufacturers in the field of industrial pumps, in line with cooperation with European pump sellers and importers as well as industrial companies, has been setting up its specialized service unit for more than 5 years. has done the following.\r\n\r\n- Specialized testing and issuance of reports and certificates confirming the performance of industrial pumps\r\n- Repairing and manufacturing the required spare parts and as a result providing after sales services\r\n- Construction of chassis and coupling based on API standard\r\n- Issuance of warranty and preparation of pump technical certificate.\r\n- Supervising the installation and operation of the pump at the employer\'s place.\r\n- Construction and implementation of mechanical flood plans and other types of technical and design services\r\n\r\nBased on this, importers, sellers and industrial groups can buy, sell or use imported pumps and stocks without any worries and with confidence, which are covered by this warranty after testing, inspection or necessary repairs. participate, take action.\r\n\r\nFor more information, visit the company\'s website\r\n\r\nhttps://petrorahanpump.ir/services/\r\n\r\nhttps://www.instagram.com/petrorahanpump?utm_source=qr&igsh=djByZDV2cDV1bXEw\r\n\r\nPhone number:\r\n02155212454\r\nInternal 111 and 109\r\n09387340981

Repair, service and overhaul of liquid oxygen, liquid argon, liquid carbon dioxide, liquid nitrogen tanks\r\n\r\nSale of supplies and equipment related to cryogenic tanks\r\n\r\nOver time, gas condensate storage tanks may lose their vacuum or the amount of their vacuum may decrease, which causes the liquid inside the tank to be thrown and wasted, or their valves may leak due to excessive operation, and it is better in periods of time. It is clear that overhaul and servicing of the mentioned tanks should be done in order to prevent the loss of the desired gas.

Belts are one of the most widely used industrial parts, which unlike many rigid industrial parts are produced flexibly. Different types of industrial belts are used in different industries with different purposes and made of different materials. The variety of this industrial part, which is produced and supplied under the name of industrial belt, is very wide and is produced in different sizes and with different brands. The most widely used types of industrial belts are power transmission belts, conveyor belts, V-belts, timing belts and special gear belts. In the lifting industry, tarpaulin slings, which are used to carry loads and are made of hard plastic fabric, are used under the name of belts. The accuracy of belt production is different according to its type and its use, and many standards have been introduced and used according to the type of use of belts. The mechanism of the industrial belt is such that its tearing or the loss of their friction layers in some machine applications will completely cause the system to fail, such as power transmission systems, while the disruption in the work of the industrial belt in some other industries It causes the work to slow down or burn some connected parts or even lock the system.

with analysis\r\nDifficulty 7\r\nThe least amount of dirt and impurities\r\nPacking in jumbo 2 and 2.5 tons

Mechanical patch of rebars (coupler) ????????????\r\n\r\n The use of mechanical patches to connect reinforcements in concrete structures is one of the ways to improve quality in the construction industry. The use of mechanical patches is recommended in international regulations and standards, including Iran\'s concrete regulations in chapter 18.\r\n\r\n✅ In every concrete structure, about 15% of the used reinforcement is turned into waste in the form of overlap connection in concrete, buried within the limits of the regulations. By using mechanical connections, not only the burial of the reinforcement is prevented in the form of covering the reinforcement, but also the waste of the reinforcement is reduced to a minimum.\r\n\r\nConsidering the existence of many operational problems in heavy structures due to the use of thick rebars, the use of mechanical patches is a way forward and in addition to creating a secure connection and even stronger than conventional reinforcement, it also solves other side problems in concrete structures. to do