Manufacturer of polyethylene pipes

Home
About Us
Contact Us
Gallery
Eshtehard Industrial Town, Hesabi Gharbi, Golrokh III, Golshid IV
Eshtard Industrial Town, Hesabi Gharbi, Golrokh Third, Golshid IV
09120561163
09120561163
Introduction


Azin Plast Chenaran (diffuser)
Polyethylene pipes under sewage pressure, drainage, new drip irrigation Production of household water and electricity pipes

Price inquiry
Introduction of polyethylene pipes of Azin Plast Chenaran Company (Distributor)

Single-walled polyethylene pipes
Poly pipes Azin Plast Kenan single-wall ethylene can be used at pressures between 2 to 40 atmospheres (depending on raw materials, diameter and pipe thickness) in various industries.

Contact us
Double-walled polyethylene pipe
Double-walled polyethylene pipe for conveying sewage and fluids without internal pressure and flow by gravity. These pipes are capable of withstanding very high external pressure.

Contact us
High pressure polyethylene pipe
Single wall high pressure polyethylene pipe or HDPE (under pressure) for the transfer of permitted fluids under Pressure is applied. Single-walled pipe is determined by the type of raw materials and its application. n Size 16 mm
Size 16 mm The thinnest size of this product is 16 mm polyethylene pipe. This size is often used in drip irrigation systems. This size is also suitable for use in the greenhouse and fittings such as drippers can be easily attached to it. Screw and weld connection is a common method of connecting this type of pipe with other pipes and fittings.
Size 20 mm
20 mm polyethylene pipe is also known as single wall pipe. This size can also be used in a variety of irrigation systems. 20mm size are produced and presented in pressures of at least 6 times up to 40 times. Their selection depends on the required water pressure inside.
Size 25 mm
Size 25 mm These pipes are produced in coils of 100 and 150 meters. They can be used in gardens and low-volume fluid transfer and at working pressures of 10 and 16 bar. These pipes are often connected to each other using polyethylene connectors and have very good strength and sealing.
Size 32 mm
32 mm polyethylene pipes can be pressed at 6, 10, 16 and Eventually produced and presented up to 32 times. These pipes are mostly used for low flow fluids and in gardens and agricultural lands and similar matters. This size can be produced in 100 and 150 meter coils depending on the customer's needs. . This product can be produced in 6 meter branches or 100 to 150 meter coils. These sizes often have low discharge. They can be used for agricultural purposes to transfer water.
Size 50 mm
Size 50 mm This product can be made at working pressures between 5 to 32 bar. This size of pipe also has a low flow. This size can also be used best in gardens and agricultural lands.
Size 63 mm
It can be said that one of the most widely used sizes of 63 mm polyethylene pipe ..

Manufacturer of polyethylene pipes