-
در بخش Sell Offers، دسته بندی Casting and machining، Province South Khorasan موردی پیدا نشد.
دسته بندی Casting and machining را امتحان کنید.-
Powder mould casting
From the supply by the company of common sense, industry, sepahan powder mould casting . Powder casting that name, powder form, etc., powder, oil, curry known to facilitate the passage melted in the midst of casting mold used. Powder casting plays an important role in continuous casting of steel plays one of the factor, important for continuous casting, smooth melt. Powder casting to the level of the top of the melt to be poured manually or automatic Powder casting, the melting point is low can be in تیجه very quick-to-liquid conversion, and the layer of liquid composed of the lubrication well to the casting process can do Powder mould casting is an effective alternative for oil casting is previously used .
Casting and machining Esfahan -
Page slide gate 1QC
Now common sense industry sepahan ready to supply all kinds of refractory materials used in the system of the slide gate. Of items can be offered by the company 1-page vents, sliding 1QC size 28 2-nozzle internal cauldron 1QC size 28 3-the nozzle of the outer cauldron 1QC size 28 4-ولبلوک cauldron 1QC size 28
Casting and machining Esfahan -
Mortar green کرومیتی
Now common sense industry sepahan manufacturer of mortar, the valve slider(mortar green ) as a powder with high quality .
Casting and machining Esfahan -
Melt Surface Insulation Powder - Isotherm Powder - Radex
Isotherm Powder In steel mills, ladles and tandis are used to transport the melt from a specific location furnace. Depending on the conditions, the type of body design and refractory spatulas and tandis as well as ambient temperature drop conditions are different. Boil lid due to the use of alumina masses and spending time to repair and install refractory materials has a higher cost than the use of isotherm powder. It is added on the surface of the melt. The main task of this powder is to insulate the surface of the melt to prevent the temperature drop and the melt is oxidized by the atmosphere. The isotherm powder used with a suitable chemical composition must have good thermal conductivity and viscosity to have a good performance. Insulation of the melt surface reduces melting costs by reducing the furnace melt discharge temperature and less corrosion of furnace refractories, ladles and ovens, and increases the absorption of molten non-metallic impurities. Isotherm consumption depends on the tonnage of the steel, the design of the pot and the tensile and the casting time. Isothermal powder becomes integrated when it is placed and spread on the molten surface of steel and begins to insulate the molten surface. When casting time is increased for any reason, this powder plays an important role in controlling the temperature drop. Isolation Melt the surface in the traditional way is done by raw and fried rice bran, which is associated with contamination and respiratory problems for employees. Raw rice bran, when placed on the surface of the melt, first takes the temperature of the melt to burn itself and creates a lot of smoke, and after burning, begins to isolate the molten surface. Due to the problem of water shortage and drought in the country and Also, the problems facing agriculture are facing the supply of rice bran. Rice bran is not always readily available and was scarce in some seasons. Due to its low weight and high volume, rice bran needs more transportation and therefore higher transportation costs. It also needs more storage space than the isotherm because it is bulky. Melt surface insulation powder Radex isotherm powder In continuous casting after transferring the pots from the melting section to the continuous casting unit, simultaneously with the discharge Intramuscular melting In casting, to prevent a drop in the temperature of the melt inside the patellar tendon, it is necessary to add a suitable coating to the melting surface to prevent heat loss of the melting due to radiation, conductivity, convection. This task is performed by a layer of solid and sintered powder. In addition, it protects the melt against surface oxidation and absorbs some of the impurities in the melt. This powder reduces the temperature drop of the melt in the pan and the tandish, and this causes better control of the casting speed, reduces the amount of oxygen in the melt and in general improves the casting conditions with better control. It is clear that preventing the drop in melt temperature has a significant effect on economic production, reducing energy consumption, increasing the refractory life of the pan and tandem. This material also prevents re-oxidation of steel by the atmosphere and due to the high ratio of calcium oxide to silica in this powder, it reduces the oxygen in the melt and also prevents the nozzle from being blocked by alumina impurities and desulfurization is better. The consumption of this powder is approximately 0.5 to 1 kg per ton and it must be poured on the surface of the melt and stored in a completely dry environment without moisture. Salim Sanat Sepahan Company is a manufacturer of various types of melt insulation isotherm powder (Radex). Melt, Salim Sanat Isotherm Powder, Radex Powder, Steel Isotherm, Salim Sanat Refractories
Casting and machining Esfahan -
Special Sale of Grade 1 Matte Sandblast Sand and Slag
Special sale of grade one matte sandblast sand ready to contract with all companies in bulk, jumbo bag, ready for delivery to all parts of the country. (Sale of grade one sandblast sand and slag) Slag for sandblasting, purchase directly from the factory without intermediaries. Cash sales. Available in grain sizes 0.5-2 and 2-3. Matte sandblast sand with company analysis, free of any impurities, hardness 7 to 8. For analysis requests and proforma invoices, contact us. Sales in bulk and 1.9-ton jumbo bags. Retail and wholesale shipping nationwide. Advantages of steel grit for sandblasting: - Very low dust - Cost-effective and economical - No harmful effects like silica abrasives - High cleaning and blasting speed - Recycling cycle three times that of silica and slag
Casting and machining Esfahan -
Refractory mass of furnace, ladle and oven steel
In the industry, wherever there is high temperature, refractory materials to control heat transfer and prevent damage to equipment in the form of insulation, refractory, abrasion resistance, shaped and amorphous and… existence Has one. Salim Sanat Sepahan Company is a supplier of refractory masses used in the steel and foundry industries. Factors affecting the quality of cast masses Rowing mixer and in a dust-free environment Quantity of water used Quality of water used (low hardness and chlorine) Water temperature between 25 to 25 ° C Mixing the mass properly Suitable vibration of masses Drying during thermal graph Proper preheat before melting No rapid cooling after melting to prevent shock Salim Sanat Sepahan Trading Company Of all kinds of crime Alumina is of the best quality. These refractory masses are used in furnaces, ladles and ovens for steelmaking. 55% to 95% alumina is produced. Other products that can be supplied by this company are tandish veneer mass. Please contact the refractory and technical experts of Salim Sanat Sepahan Company at 03132374601. For advice on refractory, please call 03132374601.
Casting and machining Esfahan -
Selling microsilica (micro -silica)
Sale of micro -silica for 26,000 Rials\r\n\r\nWhat is Micruslic?\r\n\r\nMicrusilis is a high reactive substance that is used in relatively small amounts to increase the properties of concrete. It is a by -product of special metal products in arc furnaces.
Casting and machining West Azarbaijan -
Casting, Machining, Gearing, Hardening
Hello\r\nManufacturing unit\r\nCasting and machining department of #Mehrad_Sanat_Sinad complex\r\nWith the latest technology and casting equipment, machining and hard work, he is ready to sign contracts with companies, organizations and groups related to the cement, lime, coke, and mineral processing industries.\r\nThis unit has 5 ton and 3 ton induction furnaces, as well as a 6 ton furnace, which has the ability to cast cast iron parts up to 25 tons and steel and alloy parts up to 15 tons as a single piece, and the diameter of wheels and rims up to 4/ supports 5 meters, this unit has automatic and laser molding and is equipped with a material laboratory. Friends who need casting parts with high weight or thickness can place their orders, after the casting stage of the desired part in Carousels with a diameter of 3, 4 and 5 meters are machined and geared, please contact us to arrange a visit to sign a contract and place an order.\r\nThanks to the search team.
Casting and machining West Azarbaijan
Similar Products
-
