Complete Nissan Diesel PF6

Complete Gasket Set Washer for Nissan Diesel PF6 Engine

The Nissan Diesel PF6 (also known as Nissan Diesel FE6 or UD PF6) is a 6 -cylinder, powerful and very popular 6 -cylinder diesel engine in Nissan and UD TRUCKS. The ureal of this engine and the use of a complete quality gasket kit is essential to restore it to the ideal way.

Introducing Nissan Diesel PF6 Engine

· Type: 4 -time diesel, usually as natural breathing (n/a) or turbocharged (TurboCharged)
· Layout: 6 linear cylinder
· Engine volume: 10.4 liters (10391 cc)
Power and torque: vary depending on the model and calibration, but usually in the range of 220 to 280 hp.
· Main Applications:
· Nissan Diesel and UD TRUCKS Older Series (such as some models UD Condor, UD Big Thumb, Nissan Diesel CWA)
· Intercity buses
· Heavy machinery and generators

Components of a complete PF6 engine gas washer

A complete overheld kit for this large engine should include all gaskets and cylinders. The most important components are:

1. Cylinder Gasket (Cylinder Head Gasket):
· The most important piece in the kit. The gasket is placed between the Cyline Block and the Cylinder Head and carefully separates the combustion chambers, oil channels and water canals. Its material for diesel engines is usually made of steel multilayer (MLS) or high pressure and heat -resistant composites.
2. Exhaus Manifold Gasket:
· Hot speakers direct the cylinders to the turbo or exhaust and prevent it from leakage. Due to very high heat, it must be made of very resistant sex.
3. Intake Manifold Gasket:
· Clean air (or turbocharged air) seals the cylinders.
4. Rocker Cover Gasket / Valve Cover Gasket:
· Prevents oil leakage from the upper part of the cylinder (where the camshaft and horseback desire).
5. Oil Pan Gasket:
· The floor of the oil pan to the engine block. Because of its large size, it is usually made of paper with a rubber or fully rubber.
6. Front & Rear Crankshaft Seals:
· Front Crankhaft Seal: Located in front of the engine and back of the money.
· Rear Crankhaft Seal: Located behind the engine and near the flub and clutch.
· These cylinders prevent oil leakage from the exit of the motor block.
7. Water Pump Gasket:
· Seals the water pump to the motor block or cylinder head.
8. Thermostat Washer (Thermostat Gasket):
· See the thermostat installation.
9. Valve Set Components:
Valve Stem Seals: These small uringrs are placed on the valve stem and prevent oil leaks inside the combustion chamber. Their replacement is vital.
Valve Guides: In some very complete kits, valve guides may also be replaced.
· Valve Spring Seats:
10. Ering and small gaskets:
· This section contains dozens of small pieces: A