SMS Flutter Saba 322

SMS Flutter Saba 322

SIM card floater suitable for controlling the level of reservoirs remotely in an intelligent way with unlimited range SMS control device AM322 You can create an SMS floater at the source and destination next to the tank and next to the pump or switchboard. that these two devices are networked together to control the level of the tank.
To network two SMS control devices, model AM322, we put the name of input number one in one of the devices next to the tank and the name of input number two of the same device in We save the device (according to the device's Farsi manual)
Then we connect the upper and lower tank level sensor or floater to these two inputs so that by stimulating each input sensor of the device, the message of turning off and on the pump is sent to another device that is next to The pump is going to send.
The phone number next to the pump is stored in one of the houses 2 to 7 of the device's memory. Now, if input 1, which is connected to the first (empty) floater of the tank, is triggered, the command to turn on the pump is sent to the receiving device. and the pump starts working, and when the tank is full, the input of the second or high level floater is stimulated and sends the command to turn off the pump, and the tank does not overflow. In this situation, we control the water pump motor with two AM322 devices so that the tank is filled automatically. In fact, by setting the commands and stimulating the inputs 1 and 2, which are connected to the floater (lower and upper level) of the tank. are connected, on and off commands are sent to the pump device. With this action, the tank is filled and the pump is turned off.

Using the SMS floater has no distance restrictions between the sender and the receiver and it works wherever there is a mobile antenna.
\r \n



Other features of SMS Flutter :

· Can be used in all areas covered by the mobile network

· Support for First Mobile SIM cards, Irancell, Rightel

· Control without the need for software and only with text message (SMS)

· Has 2 real five amp relays\r\ n
· It has 3 isolated inputs (in addition to level control, various types of sensors can be connected such as: electronic eye, magnet, smoke detector, etc.).(

· It has 4 current inputs up to 20 milliamps and presenting a report based on percentage

· Ability to turn the output on and off by stimulating the input

· Ability to announce power cut and disconnection (if battery and charger are installed or solar panel)

· The ability to connect to all kinds of digital and analog sensors

· The audio guide for executing orders and commands

· The ability to apply all settings and configuration e Remotely with SMS (SMS)

· High speed in processing GSM data and responding to commands

· Free Android software to facilitate working with the device\r\ n




Contents include :

v two AM322 control SMS devices

v two antennas Short SM (if you want, you can use a wired antenna for more antennas) used control.)