Siemens low voltage air switch interlock switch lock

One of the factors that causes the proper functioning of protection systems is the correct design of the earthing system, including protective earthing, operational earthing, lightning arrester earthing system, etc., according to the relevant standards and the implementation of the equipotentialization system. After going through this stage, in line with proper implementation and monitoring and maintenance, always measure the resistance of the earth systems and check the connection of the equipotential system of the site, especially when it is not possible to separate the earth or the possibility of knocking the auxiliary electrodes according to If the conditions of the project do not exist, it is one of the concerns of the users. \r\n\r\nRetonac Shaya company, as the exclusive representative of the Polish Sonel company, offers a variety of art testers with different capabilities in accordance with the latest measurement methods. \r \nAlso, this company provides technical services such as training in various measurement methods in accordance with today's standards.

The SKKD 40F Semikron double diode module is a rectifier semikron consisting of two diodes and a transformer with a 3-head output, where the two diodes can share their cathodes. The SKKD 40F double diode can be used as a rectifier for the controller. AC motors are also considered. Semikron, Germany, as one of the best manufacturers of double diode module, thyristor diode module, diode module, bridge diode module, double module \r\n\r\ndouble diode module skkd40f semikron \r\nSKKD40F semikron\r\ nInput voltage: 600 to 1000 volts\r\nCurrent: 42 amps\r\nNumber of switches: 2\r\nTypes of double semimicron diode\r\nDouble diode SKKD57/12\r\n\r\nDouble diode SKKD 57/16 \r\n\r\nDouble diode SKKD57/18\r\n\r\nDouble diode SKKD106/18\r\n\r\nDouble diode SKKD106/16\r\n\r\nDouble diode SKKD 162/16\ r\n\r\nDouble diode SKKD162/18\r\n\r\nDouble diode SKKD701/16\r\n\r\nDouble diode SKKD 701/18\r\n\r\nDouble diode SKKD380/16\r \n\r\nDouble diode SKKD 380/18\r\nContact us to buy and inquire about the price\r\nhttps://b2n.ir/n25035

Engineer Mehdi Besham has been active for two decades in the field of designing and implementing industrial automation systems and industrial automation consulting services.\r\nProgramming and implementation of dozens of industrial automation projects under Siemens, Delta, Kinko, ABB, Amren, Schneider and Chinese brands.\r\nHave a brilliant resume that can be presented to the employer\r\nThe use of specialized consulting services in the field of industrial automation can create confidence for the employer and guarantee that the electrical system is chosen correctly and will not have problems in the future.\r\nThe use of a consultant in the field of industrial automation makes it possible for the employer to have sufficient knowledge of the hardware available in Iran and with the help of the consultant, choose equipment that will not be subject to sanctions and will not suffer a long stoppage in the future.\r\n\r\nWhen buying industrial machines and production lines, be sure to get help from an industrial automation consultant to monitor the delivery and commissioning of the equipment and collect all the required documents from the seller.\r\n\r\nThe industrial automation consultant can check whether the purchased electrical system has a login and password or not so that you don\'t face challenges and reprogramming the device in the future. Many projects were referred to us where the device was purchased years ago and the seller put a timer in the PLC program for two to ten years after the sale so that your dependence on the seller is always maintained.\r\n\r\nThe industrial automation consultant can take the backup program of the industrial automation system of your device and prepare the PLC program from the backup, so that if the equipment suffers an accident, burns, or breaks down in the future, it can recover the program in the shortest time and within an hour the device to launch\r\nThe industrial automation consultant can have a vision for the future and order the equipment in such a way that in the future the next phases can be implemented under an integrated system and minimize the costs.\r\n\r\nAnd finally, if your factory or workshop has programmable equipment or you decide to buy or build such a device or production line, be sure to get help from an industrial automation consultant.

**[Faratel automatic transformer model AVR32F](https://www.automation24.ir/product-3871/%25D8%25AA%25D8%25B1%25D8%25A7%25D9%2586%25D8%25B3-%25D8%25A7% 25D8%25AA%25D9%2588%25D9%2585%25D8%25A7%25D8%25AA%25DB%258C%25DA%25A9-%25D9%2581%25D8%25A7%25D8%25B1%25D8%25A7%25D8%25AA%25D9 %2584-%25D9%2585%25D8%25AF%25D9%2584-avr32f)**\r\n \r\n Suitable for use in all homes and home electrical equipment with 32 A consumption\r\nEquipped with a microcontroller\r\nAbility to detect non-connection of protective wire (earth)\r\nEquipped with automatic bypass system\r\nCan be placed on a table or mounted on a wall\r\nIt has a wide input range\r\nEquipped with a warning system when the internal temperature rises\r\nBeing equipped with a protection system for consumer devices against two phases, severe power fluctuations and lightning.\r\nLeaving the input voltage from the range of 150~275 volts (to prevent damage to the consumer\r\nCut off the output if the internal temperature of the device increases beyond the allowed limit\r\nEquipped with an input filter to reduce noise and city electricity spikes\r\n\r\n**[Click here to buy the product](https://www.automation24.ir/)**\r\n\r\nFaratel automatic trans, APR32 model:\r\n\r\nSuitable transformer for home electrical equipment\r\nsingle phase\r\nMaximum current up to 32 amps\r\nThe starting current is 100 amps\r\nDelay time 3\r\nEquipped with a microcontroller\r\nAbility to detect non-connection of protective wire (earth)\r\nEquipped with automatic bypass system\r\nCan be placed on a table or mounted on a wall\r\nEquipped with a warning system when the internal temperature rises\r\nBeing equipped with a protection system for consumer devices against two phases, severe power fluctuations and lightning.\r\nLeaving the input voltage from the range of 150~275 volts (to prevent damage to the consumer\r\nCut off the output if the internal temperature of the device increases beyond the allowed limit\r\nEquipped with an input filter to reduce noise and city electricity spikes\r\n\r\nSpecial features of Faratel APR32 automatic trans:\r\n\r\nEquipped with a delay circuit to protect consumer devices when the city power is turned off and on\r\nStrengthening and stabilizing the fluctuations and weakness of the city\'s electricity voltage\r\nEquipped with a microcontroller system\r\nEquipped with a filter to protect consumer devices against noise and city electricity disturbances\r\n\r\n\r\nFaratel automatic transformer protection systems model APR32:\r\nStrengthening and stabilizing the fluctuations and weakness of the city\'s electricity voltage\r\nFaratel model APR32 automatic trans alarms:\r\n\r\n(LED, LCD): Audio:\r\n\r\nSupplying the output power through the Bypass switch. Lack of proper connection with earth.\r\nIncreasing the internal temperature of the device

[**Shemshkhor RTB150 rail terminal:**](https://www.automation24.ir/product-426/%25D8%25AA%25D8%25B1%25D9%2585%25DB%258C%25D9%2586%25D8% 25A7%25D9%2584-%25D8%25B1%25DB%258C%25D9%2584%25DB%258C-%25D8%25B4%25D9%2585%25D8%25B4-%25D8%25AE%25D9%2588%25D8%25B1-rtb150 )\r\n\r\nTerminals in the electrical industry play the role of communication between several devices. In fact, we use terminals so that we can easily wire and assemble the panel. Terminals are made in different types. Some terminals are rail and are placed inside the board and on the rail. This category of plastic terminals is used for two-wire communication and provides electricity.\r\n\r\nThe terminals are available in different sizes as well as single-story and multi-story. Some of these terminals that can be used for earthing are a combination of plastic and metal to connect with the body. Also, some of the terminals are simple and can be divided into the body of the box or screwed to the panel. These terminals can be made of plastic or cao chu.\r\n[\r\n**Click here to buy the product] (**https://www.automation24.ir/)\r\n\r\nIn general, terminals play the role of connecting two devices for simplification and easier troubleshooting. Because you can dial the number on the terminals and find the connection between the equipment according to the terminal number, therefore it helps a lot during troubleshooting.\r\nAlso, some terminals are multi-story, and these terminals can be used in places where there is little space and many control wires are stretched.\r\nTips to know when buying a terminal:\r\nAllowed amperage of the terminal\r\nTerminal size\r\nNumber of terminal floors\r\nAppearance of the terminal\r\nCan be installed on the rail or not

**[Photocell 16 Amp Shiva Amwaj:](https://www.automation24.ir/product-3148/%25D9%2581%25D8%25AA%25D9%2588%25D8%25B3%25D9%2584-16a%25D8% 25B4%25DB%258C%25D9%2588%25D8%25A7-%25D8%25A7%25D9%2585%25D9%2588%25D8%25A7%25D8%25AC-%25D9%2585%25D8%25AF%25D9%2584:psa16a) ** Shiva Amwaj photocell is a suitable device for controlling the lighting system of different places in such a way that the desired lamps will be lit at sunset and turned off at dawn for consecutive years. By using this method, in addition to increasing the useful life of lamps, electricity consumption is also saved. [Click here to buy the product] (https://www.automation24.ir/) Features of the 16-amp Shiva Amwaj photocell: Shiva Amwaj 16 amp photocell is one of the best devices for automatic control of the lighting system during sunrise and sunset Has an agreement in principle from the Ministry of Industries Has a certificate from the Scientific and Industrial Research Organization of Iran It has the approval of the quality of operation from the Electricity Distribution Company of Iran Technical specifications of the 16-amp Shiva Amwaj photocell: Supply voltage: 180 to 220 volts AC Light intensity for connection (dusk): about 12 lux Light intensity for cutting (dawn): about 40 lux Disconnection / connection delay: about 30 seconds Efficiency in temperature: between -20 and +65 degrees Celsius Efficiency in humidity: 70% Relay output: 16 amps

[**Limit Switch Comp DM-F12Z11**](%D9%84%DB%8C%D9%85%DB%8C%D8%AA%20%D8%B3%D9%88%D8%A6%DB% 8C%DA%86%20%DA%A9%D8%A7%D9%85%D9%BE%DB%8C%20DM-F12Z11)\r\n\r\n A limit switch is a device that starts moving when a machine part moves or when an object is present. Limit switches are used to control devices as part of a control system, as a safety lock, or to count objects that pass a point. A limit switch is an electromechanical device that consists of a mechanical actuator connected to a The category consists of contacts. When an object reaches a contact through an operator, the device causes the contacts to be disconnected and connected in order to create or disconnect the electric current.\r\n\r\nLimit switches have different applications and are used in different environments due to their strength, ease of installation and reliable performance. Limit switches are able to identify different situations such as presence or absence, rejection, positioning and identifying the end of an object\'s path. Limit switches are usually used to control the movement of machines. For example, we can refer to cutting machines, conveyor belts, automatic lathes, elevators. In general, limit switches can be used in most machines that require dimensional movement control.\r\n\r\n**[Click here to buy the product](https://www.automation24.ir/)**\r\n\r\nLimit switches were initially used to identify the end and limit of a path and to move an object, and that is why they are called limit switches.\r\n\r\nStandard limit switches are industrial control parts that have different types of operators, including push, roller, and needle types.\r\n\r\nRarely, a final actuating device such as a lamp or an electric valve is directly controlled by the contacts of an industrial limit switch. But mainly a limit switch is used with a control relay, a contactor or as an input in a PLC.\r\n\r\nWith the advancement of technology and the construction of electronic sensors, now limit switches have replaced proximity sensors in most cases. But electromechanical limit switches are still used due to their simplicity, low price, ease of installation and reliability.\r\n\r\nTypes of limit switches:\r\n\r\nWith a pulley lever\r\nwith push lever\r\nwith antenna lever\r\nwith a roller lever

Delta PLC 258C-%25D8%25AF%25D9%2584%25D8%25AA%25D8%25A7-dvp20ex200t)\r\n\r\nThe number of CPU inputs and outputs is 20\r\n\r\nThe maximum input and output can be 256 inputs + 16 outputs or 256 outputs + 16 inputs.\r\n\r\nProgramming capacity of 16000 steps\r\n\r\nIt has one RS-232 port and two RS-485 ports\r\n\r\n**[Click here to buy the product](https://www.automation24.ir/)**\r\n\r\nFlexibility in choosing types of expansion:\r\n\r\nES2 series CPUs have various expansions including digital input/output, analog input/output, temperature module. This series has made ES2 expandable PLCs very useful and practical.\r\n\r\nToday, with the advancement of science and technology and going towards reducing costs, there have been many changes in electrical science. The use of complex circuits, which all used a lot of wiring and caused many problems, led to the emergence of new technologies. Meanwhile, PLCs have created a good space in the industry.\r\n\r\nPLC stands for Programmable Logic Controller. The use of PLC has created a suitable environment for reducing costs, automating equipment, and reducing failures resulting from excessive wiring.\r\n\r\nThe function of PLC used to be relay command circuits, whose use is obsolete in new industrial environments. With the use of PLC, changes in the process of machine operation are made easily. Because it is no longer necessary to change the wiring and control hardware, and it is enough to write a few lines of program and send it to the PLC to realize the desired control.\r\nFeatures of PLCs:\r\nThey have a modular structure, parts of which can be replaced easily.\r\nThe possibility of changing the program without changing the wiring and reaching the desired output.\r\nPossibility of remote control.\r\nComponents of PLC:\r\n\r\nPower supply unit\r\nCPU central processing unit\r\nMemory\r\nInput modules\r\nOutput modules\r\nSignal transformation modules\r\nProcessor communication modules\r\nInterface module\r\nThe body of the shelves