Galvanized cable ladder (tick cable tray)

Galvanized cable ladder (tick cable tray)

Galvanized metal cable ladder:
This type of cabling system with stairs placed horizontally between two vertical rails is known as cable ladder in Iran. Abroad, under the name of Cableladder, it is calculated and used for the installation and operation of the network cabling system with the best price of the cable ladder. Cable ladders are a prefabricated structure made of galvanized metal and steel, which are connected by two longitudinal side rails by a rail step. Their distance should be compatible with the type of power cables. The internal rails of the ladders increase the distance between the cables and create a better ventilation system.
## Width of electric cable ladder:
The part of the openings of the exit and entrance of the cables is wide and bends so that the stairs can be placed comfortably. Their floor to floor is the height of the cable ladder, the higher it is, the more visible the rails are covered. Heavier electric cables have the possibility of slipping on the cable ladder due to their heavy weight. In this case, you need to consult with the manufacturer for a more suitable choice. We suggest using rail holding fasteners. If the width is large, it is better to use cable trays so that it is completely enclosed and there is no need for fasteners.
## Production method of galvanized cable ladder:
Every type of structure is built according to the same principles and standards, and the galvanized cable ladder is no different from this rule. First, the length and dimensions of the cable ladder are specified by the buyer. The main body is cut from two side rails that are wide enough to hold two and three meter stairs. Then the side body, which is completely flat, is bent to take the shape of a half-can. Galvanized rails are used to connect the two sides of the ladders, the rails are placed in the body as a step.
## Effective factors in the safety of choosing cable ladders:
Since the smaller size of the ladders does not affect the total price of the project, designers usually try to reduce the cost. This itself causes a decrease in safety and quality in the production method. First, the correctness of the load imposed on the cable ladders is calculated by expert engineers. For example, the number of cables to be placed on the ladder is determined. If in doubt, it is better to consider the thickness more.