Categories
تولیدوفروش کوپ travertine وگرانیت

تولیدوفروش کوپ travertine وگرانیت

Sale کوپ travertine

Contact info
CountryIran
ProvinceWest Azarbaijan
Similar products
  • Equipment production lines, sand

    A variety of Hammer and anvil crusher hammer, such as cone crusher, etc. بهرینگر., the Parker, Goodwin A variety of shoulder, jaw, jaw strap, and bearings, of the crusher A variety of mantel, etc. کانکیو, etc. هدسنتر, etc. potted, and the tops loose and withtheme shell crusher, هیدروکن Types of armpit strap and the underarm strap ferrous and cast iron A variety of netting, vibrating screen anti-wear from the fountain 01 the Eli 100's of free iron, and carbon steel filled carbon sizes 2*1 1.5*1 A variety of رولیک conveyor and the base رولیک and bar clamps-conveyor belt and rollers Rubber conveyor belt in annual 60 to. 70 to. 80, 100 and in a variety of (sahand, etc. Dena), etc. تایروک Korean and Chinese for three layers and jahar layer, EP (EP315 big EP400 outdoor EP500 big EP630 big EP800) for simple and عاجدار and in a variety of conventional refractory (D1,D2) Crusher spare parts, hammer A variety of Hammer and anvil crusher hammer, such as cone crusher, etc. بهرینگر., the Parker, Goodwin Hammer cone crusher, 120, etc., hammer cone crusher, 180, etc. anvil cone crusher, 120, etc. anvil cone crusher, 180, etc. hammer sand Maker, anvil, sand Maker, rotor, sand Maker, hammer, Parker, 103, etc., hammer, Parker, 104, etc., hammer, Parker, 3, etc.", Parker, 104, etc.", Parker, 103, etc., the disc rotor, Parker, 103, etc., the disc rotor, Parker, 104, etc. brachial Parker 103 in. jib, Parker, 104, etc. hammer, Goodwin, etc. hammer بهرینگر HS10, etc. kollam HS10, etc. procedural anvil HS10, etc. armpit strap, umbilical cord, triangular, HS10, etc. armpit strap, umbilical cord, square, etc. armpit, strap-less, rectangular, etc. Hammer بهرینگر HS7, etc. هازماک 103 and 105, etc. هازماک 104 and 106 significant production of steel منگنزی and cast iron نایهارد and surgical منگنزی molybdenum, alloy steel and carbon steel Crusher spare parts, jaw crusher A variety of shoulder, jaw, jaw strap, and bearings, of the crusher Shoulder jaw 55*80 fixed, shoulder, jaw 55*80, injections, etc., shoulder, jaw 30*125, shoulders heavy 90*40 short, shoulders heavy 90*40. shoulder heavy 45*65, shoulders فک 50*30, etc., shoulder, jaw, 20 x 42 In. shoulder heavy 90*110ثابت, shoulders heavy 90*110 movable, jaw strap 63*100., the jaw strap, 55*80, etc. jaw strap 20*42, shoulders فک 30*125 fixed, shoulder, jaw 30*125 families, etc. Shoulder jaw fixed 63*100 fixed, shoulder, jaw, families, 63*100, shoulders fixed jaw 80*100(dimensions 107*145 cm ), the shoulder fixed jaw 80*100(dimensions 100 x 127.5 cm ), the bearing 90*110, etc. bearing 63*100., the bearing 55*80., the bearing 45*65 Crusher spare parts, هیدروکن A variety of mantel, etc. کانکیو, etc. هدسنتر, etc. potted, and the tops loose and withtheme shell crusher, هیدروکن کانکیو 4 shorter. کانکیو 2 shorter. کانکیو 7, etc. Montale 2, the Montale 4, reliable production of steel منگنزی and منگنزی molybdenum, potted, etc. bead head, shaft, etc. هدسنتر., the hopper (funnel)The. pod., the holder, duster, etc. کفگرد bed, pinions, plastic bearings, rims, steel, etc., Cup., the, floor, round, lens, etc. Bush steel, etc., plunger, etc., cap housing, etc. اسپیسر the. mercenary., the spider, etc. miniatu .. kolar, etc. کرانویل the. seal., the Bush اکسنتریک, screen, Bronze, etc. packing, etc. main shaft, etc. پالونی "page of steel" page of the pocking., the Foley, etc., duster, etc. Bush Congress. کفگرد stainless steel, plate, potted, etc. shafts, pinions, plastic liner, Foley Lace vibrating A variety of netting, vibrating screen anti-wear from the fountain 01 the Eli 100's of free iron, and carbon steel filled carbon sizes 2*1 1.5*1, and based on the latest standard set with the latest technology of the day. Including the benefits of Tours, the steel resistance against high silica in coal mines and sand washing, River. and lace, vibrating screen, ferrous metal, try on this up to any size, free Iron, specific to that of the springs used رولیک conveyor All devices the conveyor has two rollers, the main are that at the beginning and the end of the device, which placed the power of its rotation from the electric motor and the conveyor to move in.In conveyor systems in addition to the rollers, the head and the bottom of the رولیک or idlers, are also used. رولیک, along the path of conveyor, fall, and directed the task bar along the way. رولیک a type of weed round, which is the main part of the material handling is responsible for the and in size, dimensions and capacity of the various design and production), including رولیک replacement (fusion), etc. رولیک Percy (typical), the رولیک, stainless steel, etc. رولیک polymer (Teflon) رولیک vulcanized rubber (bumpers).... Application رولیکها in factories in the cement, steel manufacturer, etc. all mines (coal, stone, Iron,...), petrochemical industries facilities بندرگاهی industries, tile and ceramic. To select رولیک desired, knowing the diameter of the tube and the shaft, and the length of the tube and shaft is necessary. Rubber conveyor belt Conveyor belt, wear-resistant Coating procedures of this type the conveyor belt, of the genus rubber, resistant against wear, is designed. Use the conveyor belts to carry the order who wear high have coated conveyor belt, ordinary to be able to resist in front of this wear are not recommended. Conveyor belt heat resistant This type of lace, in double grid produced. The first type, heat-resistant temperature 120 degrees centigrade, continuous, or 150 degrees centigrade discontinuous and the second type, heat-resistant temperature 150 degrees centigrade, continuous, or 180 ° C discontinuous Conveyor belt resistant pigments Coated uppers and outsole, this type of conveyor belt in front of a variety of oil resistant. This conveyor belts to transport the loads dipped in oil is used. It should be noted, the use of a conveyor belt, لاستیکی with any normal in the environment, in any way not correct, because the oil causes swelling and detachment, rubber cloth, or bone lace, and tear it gets. Conveyor belt chemical resistant This type of belt, excellent resistance towards chemicals, including acids and bases and other chemicals. Conveyor belt with tread grip Coating procedures this conveyor belt has the dimples and bumps is that of the slip time on the slope with the angle fairly steep avoids.This lace maximum width of 140 cm can be produced . Conveyor belt with embossed aluminium v form Tread, this belt to a height of 5 mm is that in the intervals of 10 cm again, and in the annual 50 to. 60 to. 70 to. 80 cm produced this kind of conveyor belts for special purposes and on the basis of the angle of the slope carry the kind of load used. For information, update, technical experts, please contact us. Tel : +98 21 55798847 Fax : +98 21 55750811 Mobile : +98 912 5126319 Email : info@pnicco.com www.pnicco.com Line.me/pnicco Instagram.com/parsnovinco Production lines, sand, installations, sand etc. parts, anti-abrasion, mines, mines, sand etc. parts, crusher sand, crusher spare parts, hammer, etc. parts, crusher, cone crusher, etc. crusher parts, sand Maker, crusher parts بهرینگر HS, parts, crusher Parker, crusher parts هازماک, etc. crusher spare parts Goodwin, components of jaw crusher, components crusher هیدروکن the ... hammer, cone crusher etc., hammer cone crusher, 120, etc., hammer cone crusher, 180, etc., hammer cone crusher, the 240, etc., hammer, cone crusher منگنزی the ... hammer, cone crusher نایهارد, etc. Lock and load, hammer, etc. lock and load cone crusher, 120, etc. lock and load cone crusher, 180, etc. anvil cone crusher, etc. anvil u. anvil Double screw cone crusher, etc. anvil the two screws نایهارد, etc. anvil, twist, anvil, screw نایهارد, etc. anvil, four page., the anvil, slider, cone crusher, etc. anvil, slider, 120., the anvil, slider, 180., the magazine anvil cone crusher, etc. lock and load the anvil 120., the magazine anvil 180, etc. fit سندانی and ... bearing cone crusher, the ... rotors, cone crusher, etc. the robes of the rotor, the robes of the rotor 120., the robes of the rotor 180, etc. robes, rotor, cone crusher, double-sided, armpit, strap, cone crusher, etc. armpit, strap iron, etc. Armpit strap, cast iron, etc. edge finishing and Cone Crusher, etc. ceiling cone crusher., the crescent, round, rotor, tile 01 In. tile, 20*20, etc., tile, 02, etc. bumpers, 23*17 etc., the flange edge of the thin and thick, etc., springs, hammers, springs, hammer, 120., the springs, the hammer 180, pin gowns rotor, shell bearings, ring inside the bearing Bush behind Foley, ... Bush کونیک Foley, ... liner behind the bearing cap, simple, door, accessories., cap, cap, compound, etc. or regulating edge finishing and ... height سندانی., the shaft cone crusher, etc. the shaft edge finishing and ... Shaft fit سندانی, etc., Bush, head, shaft, etc. fully 30 cm., the Foley, 90 cm., the Horseshoe, the back of the door, etc. bolts, anvil, etc. bolt and nut armpit. bolt and nut, cone crusher, etc. hammer بهرینگر HS7, etc. hammer بهرینگر HS10, etc. hammer HS10 منگنزی, etc. چکشHS10 منگنزی molybdenum. hammer HS10 نایهارد, etc. hammer HS7 منگنزی, etc. hammer HS7 نایهارد, strap retainer, hammer, HS10, etc. magazine بهرینگر HS10, etc. armpit strap, 25*25 in. armpit strap, 25*25, negating the. armpit, 20*25, etc. Armpit, 20*25, negating the, armpit, strap, triangular, etc. armpit strap triangular negating. procedural anvil HS10, etc. armpit strap square HS10, etc. armpit strap rectangular HS10, etc. armpit, strap-negating, HS10, etc. kollam HS10, etc. hammer sand Maker, hammer sand Maker منگنزی more. hammer sand Maker منگنزی molybdenum, anvil, sand Maker, rotor, sand Maker, ball bearings, sand Maker, shaft and flange are assembled, sand Maker, shaft sand Maker, flange, sand Maker, Foley, sand Maker, etc. the Bush inside the flange, sand Maker, etc. Flange, fixed, sand Maker, pod shaft sand Maker, complete nut shaft sand Maker, بازرویی small and large sand Maker, wrench shaft sand Maker, the two screws being adjusted, sand Maker, valve, sand Maker, door clamps, sand Maker, Bosch, basic Electric, sand Maker, robes, rotor, sand Maker, " rotor 1/18 sand Maker, ceiling 1/2 sand Maker, ceiling 1/3 sand Maker, bumpers, sand Maker, armpit, strap, overhead, sand Maker, shoot the middle sand Maker, shoot the output of sand Maker, shoot the incoming sand Maker, etc. Hinge fixed and movable sand Maker, pin hammer sand Maker, screw eye, sand Maker, screw and nut, sand Maker, hammer Parker منگنزی, etc., hammer, Parker, 103, etc., hammer, Parker, 104, etc., hammer, Parker, 3, etc.", Parker, 104, etc.", Parker, 103, etc., the disc rotor, Parker, 103, etc., the disc rotor, Parker, 104, etc. brachial Parker 103 in. jib, Parker, 104, etc. کانکیو and mantel, etc. کانکیو منگنزی, etc. کانکیو منگنزی molybdenum. mantel منگنزی., the mantel منگنزی molybdenum. کانکیو 2, a کانکیو 4, etc. کانکیو 5, etc. کانکیو 5/6, etc. کانکیو 7, etc. کانکیو 8, a mantel 2 in. mantel 4., the tops loose and withtheme the loose, das, color, etc. هدسنتر, etc. potted, etc. اورینگ, etc. اسپیسر., the Bosch stainless steel, Bosch اکسنتریک., the Bush Spider. liner, piston, etc. Bush Foley, steel, etc. Bush Foley, electro-motor, Bush Congress. آچارهای main and wedge, etc., bearing 2219, etc. bearing 7219, etc. gear کرانویل, etc., gear, pinion, ring, duster, cast iron, ring کرانویل, ring nut, shaft., the shaft, housing, etc. main shaft, هیدروکن., the Foley, housing, etc. fully electro-motor, pod, head, shaft, etc. Fiber bed کرانویل, etc. fiber duster, etc. saucers Bush Foley-ferrous, nut head, shaft, etc. plate, piston, etc. pocking with. پالونی. shell, housing, etc., plunger, etc. کسه felt the head of the shaft., the bolts کانکیو and potted in. bolts. category, engine, Cup, Spider, etc. pan هیدروست, etc., floor, round, stainless steel, etc., floor, round, lens, etc., floor, round bed, washer cap housing, etc. the gasket داسکالر, etc., washer, potted, etc. gasket, housing, etc. the Gasket ring کرانویل, shoulders, jaw stone crusher, jaw crusher, etc. jaw strap jaw crusher, etc. Bearing crusher, jaw, shoulders, jaw 55*80 fixed, shoulder, jaw, 55*80 movable, shoulder, jaw, 30 x 125, shoulders, jaw 90*40 short, shoulder, jaw, 90*40, etc., shoulder, jaw, 45*65, shoulders, jaw 50*30, etc., shoulder, jaw, 20 x 42, shoulders, jaw 90*110ثابت, shoulders, jaw 90*110 movable, the jaw strap 63*100., the jaw strap, 55*80, etc. the jaw strap 20*42, shoulders, jaw 30*125 fixed, the shoulder, the jaw 30*125 movable, a shoulder fixed jaw 63*100 fixed, the shoulder, the movable jaw 63*100, shoulders fixed jaw 80*100(dimensions 107*145 cm), the shoulder fixed jaw 80*100(dimensions 100*127.5 cm)Etc. bearing 90*110, etc. bearing 63*100., the bearing 55*80., the bearing 45*65 " screen, push the jaw in. shaft, crank, jaw, etc., studs, long and short jaw, the back of the jaw, etc., gearbox, a book, etc., gearbox, SN2, etc., gearbox, SN3, etc., gearbox, SN4, etc., gear, solar, gearbox, SN, etc. Bush, gearbox, SN, etc. shaft, gearbox, SN, etc. the belt A, belt B, belt C, claw arm, Marini, etc., tiller arm industry, pick, Marini, etc., pick industries. Luciano الواتور, etc. started الواتور, etc., chains, الواتور, etc., rubber conveyor belt, etc. Belt conveyor, conveyor, rubber, conveyer, etc., bar, conveyer, etc., rubber conveyor تایروک, etc., rubber conveyor belt, sahand, etc., rubber conveyor, Dena, etc. rubber conveyor belt. lace vibrating Tabriz, netting, vibrating screen, sabzevar, Khorasan, Iran lace vibrating ferrous netting, vibrating screen, steel, etc. netting, vibrating springs, 1 to 100, etc. رولیک conveyor, etc. رولیک, conveyer, etc. رولیک bearing replacement, etc. رولیک bearings, normal) fastening, belt conveyor, etc. the base رولیک., the base رولیک the Middle, the base رولیک aside, the base رولیک the side welded in. base رولیک the middle of the rivets, etc. base رولیک single hole. Base رولیک sliding under the bar, the base رولیک vestibule, regular, base رولیک vestibule, irregular, etc. base رولیک vestibule hole. رولیک excluded. رولیک fusion, etc. رولیک, stainless steel, etc. رولیک polymer, etc. رولیک, Teflon, etc. رولیک vulcanized rubber. رولیک bumpers, adhesive tape, conveyor belt, etc. glue SC2000

    Extraction Tehran
  • Crusher spare parts sand – parts, anti-wear mines

    A variety of Hammer and anvil crusher hammer, such as cone crusher, etc. بهرینگر., the Parker, Goodwin A variety of shoulder, jaw, jaw strap, and bearings, of the crusher A variety of mantel, etc. کانکیو, etc. هدسنتر, etc. potted, and the tops loose and withtheme shell crusher, هیدروکن Types of armpit strap and the underarm strap ferrous and cast iron A variety of netting, vibrating screen anti-wear from the fountain 01 the Eli 100's of free iron, and carbon steel filled carbon sizes 2*1 1.5*1 A variety of رولیک conveyor and the base رولیک and bar clamps-conveyor belt and rollers Rubber conveyor belt in the annual 50، 60، 70، 80، 100، 120، 150 in a variety of (sahand, etc. Dena), etc. تایروک Korean and Chinese for three layers and jahar layer, EP (EP315 big EP400 outdoor EP500 big EP630 big EP800) for simple and عاجدار and in a variety of conventional refractory (D1,D2) Crusher spare parts, hammer A variety of Hammer and anvil crusher hammer, such as cone crusher, etc. بهرینگر., the Parker, Goodwin Hammer cone crusher, 120, etc., hammer cone crusher, 180, etc. anvil cone crusher, 120, etc. anvil cone crusher, 180, etc. hammer sand Maker, anvil, sand Maker, rotor, sand Maker, hammer, Parker, 103, etc., hammer, Parker, 104, etc., hammer, Parker, 3, etc.", Parker, 104, etc.", Parker, 103, etc., the disc rotor, Parker, 103, etc., the disc rotor, Parker, 104, etc. brachial Parker 103 in. jib, Parker, 104, etc. hammer, Goodwin, etc. hammer بهرینگر HS10, etc. kollam HS10, etc. procedural anvil HS10, etc. armpit strap, umbilical cord, triangular, HS10, etc. armpit strap, umbilical cord, square, etc. armpit, strap-less, rectangular, etc. Hammer بهرینگر HS7, etc. هازماک 103 and 105, etc. هازماک 104 and 106 significant production of steel منگنزی and cast iron نایهارد and surgical منگنزی molybdenum, alloy steel and carbon steel Crusher spare parts, jaw crusher A variety of shoulder, jaw, jaw strap, and bearings, of the crusher Shoulder jaw 55*80 fixed, shoulder, jaw 55*80, injections, etc., shoulder, jaw 30*125, shoulders heavy 90*40 short, shoulders heavy 90*40. shoulder heavy 45*65, shoulders فک 50*30, etc., shoulder, jaw, 20 x 42 In. shoulder heavy 90*110ثابت, shoulders heavy 90*110 movable, jaw strap 63*100., the jaw strap, 55*80, etc. jaw strap 20*42, shoulders فک 30*125 fixed, shoulder, jaw 30*125 families, etc. Shoulder jaw fixed 63*100 fixed, shoulder, jaw, families, 63*100, shoulders fixed jaw 80*100(dimensions 107*145 cm ), the shoulder fixed jaw 80*100(dimensions 100 x 127.5 cm ), the bearing 90*110, etc. bearing 63*100., the bearing 55*80., the bearing 45*65 Crusher spare parts, هیدروکن A variety of mantel, etc. کانکیو, etc. هدسنتر, etc. potted, and the tops loose and withtheme shell crusher, هیدروکن کانکیو 4 shorter. کانکیو 2 shorter. کانکیو 7, etc. Montale 2, the Montale 4, reliable production of steel منگنزی and منگنزی molybdenum, potted, etc. bead head, shaft, etc. هدسنتر., the hopper (funnel)The. pod., the holder, duster, etc. کفگرد bed, pinions, plastic bearings, rims, steel, etc., Cup., the, floor, round, lens, etc. Bush steel, etc., plunger, etc., cap housing, etc. اسپیسر the. mercenary., the spider, etc. miniatu .. kolar, etc. کرانویل the. seal., the Bush اکسنتریک, screen, Bronze, etc. packing, etc. main shaft, etc. پالونی "page of steel" page of the pocking., the Foley, etc., duster, etc. Bush Congress. کفگرد stainless steel, plate, potted, etc. shafts, pinions, plastic liner, Foley Lace vibrating A variety of netting, vibrating screen anti-wear from the fountain 01 the Eli 100's of free iron, and carbon steel filled carbon sizes 2*1 1.5*1, and based on the latest standard set with the latest technology of the day. Including the benefits of Tours, the steel resistance against high silica in coal mines and sand washing, River. and lace, vibrating screen, ferrous metal, try on this up to any size, free Iron, specific to that of the springs used رولیک conveyor All devices the conveyor has two rollers, the main are that at the beginning and the end of the device, which placed the power of its rotation from the electric motor and the conveyor to move in.In conveyor systems in addition to the rollers, the head and the bottom of the رولیک or idlers, are also used. رولیک, along the path of conveyor, fall, and directed the task bar along the way. رولیک a type of weed round, which is the main part of the material handling is responsible for the and in size, dimensions and capacity of the various design and production), including رولیک replacement (fusion), etc. رولیک Percy (typical), the رولیک, stainless steel, etc. رولیک polymer (Teflon) رولیک vulcanized rubber (bumpers).... Application رولیکها in factories in the cement, steel manufacturer, etc. all mines (coal, stone, Iron,...), petrochemical industries facilities بندرگاهی industries, tile and ceramic. To select رولیک desired, knowing the diameter of the tube and the shaft, and the length of the tube and shaft is necessary. Rubber conveyor belt Conveyor belt, wear-resistant Coating procedures of this type the conveyor belt, of the genus rubber, resistant against wear, is designed. Use the conveyor belts to carry the order who wear high have coated conveyor belt, ordinary to be able to resist in front of this wear are not recommended. Conveyor belt heat resistant This type of lace, in double grid produced. The first type, heat-resistant temperature 120 degrees centigrade, continuous, or 150 degrees centigrade discontinuous and the second type, heat-resistant temperature 150 degrees centigrade, continuous, or 180 ° C discontinuous Conveyor belt resistant pigments Coated uppers and outsole, this type of conveyor belt in front of a variety of oil resistant. This conveyor belts to transport the loads dipped in oil is used. It should be noted, the use of a conveyor belt, لاستیکی with any normal in the environment, in any way not correct, because the oil causes swelling and detachment, rubber cloth, or bone lace, and tear it gets. Conveyor belt chemical resistant This type of belt, excellent resistance towards chemicals, including acids and bases and other chemicals. Conveyor belt with tread grip Coating procedures this conveyor belt has the dimples and bumps is that of the slip time on the slope with the angle fairly steep avoids.This lace maximum width of 140 cm can be produced . Conveyor belt with embossed aluminium v form Tread, this belt to a height of 5 mm is that in the intervals of 10 cm again, and in the annual 50 to. 60 to. 70 to. 80 cm produced this kind of conveyor belts for special purposes and on the basis of the angle of the slope carry the kind of load used. Tel : +98 21 55798847 Fax : +98 21 55750811 Mobile : +98 912 5126319 Email : info@pnicco.com www.pnicco.com Line.me/pnicco Instagram.com/parsnovinco Production lines, sand, installations, sand etc. parts, anti-abrasion, mines, mines, sand etc. parts, crusher sand, crusher spare parts, hammer, etc. parts, crusher, cone crusher, etc. crusher parts, sand Maker, crusher parts بهرینگر HS, parts, crusher Parker, crusher parts هازماک, etc. crusher spare parts Goodwin, components of jaw crusher, components crusher هیدروکن the ... hammer, cone crusher etc., hammer cone crusher, 120, etc., hammer cone crusher, 180, etc., hammer cone crusher, the 240, etc., hammer, cone crusher منگنزی the ... hammer, cone crusher نایهارد, etc. Lock and load, hammer, etc. lock and load cone crusher, 120, etc. lock and load cone crusher, 180, etc. anvil cone crusher, etc. anvil u. anvil Double screw cone crusher, etc. anvil the two screws نایهارد, etc. anvil, twist, anvil, screw نایهارد, etc. anvil, four page., the anvil, slider, cone crusher, etc. anvil, slider, 120., the anvil, slider, 180., the magazine anvil cone crusher, etc. lock and load the anvil 120., the magazine anvil 180, etc. fit سندانی and ... bearing cone crusher, the ... rotors, cone crusher, etc. the robes of the rotor, the robes of the rotor 120., the robes of the rotor 180, etc. robes, rotor, cone crusher, double-sided, armpit, strap, cone crusher, etc. armpit, strap iron, etc. Armpit strap, cast iron, etc. edge finishing and Cone Crusher, etc. ceiling cone crusher., the crescent, round, rotor, tile 01 In. tile, 20*20, etc., tile, 02, etc. bumpers, 23*17 etc., the flange edge of the thin and thick, etc., springs, hammers, springs, hammer, 120., the springs, the hammer 180, pin gowns rotor, shell bearings, ring inside the bearing Bush behind Foley, ... Bush کونیک Foley, ... liner behind the bearing cap, simple, door, accessories., cap, cap, compound, etc. or regulating edge finishing and ... height سندانی., the shaft cone crusher, etc. the shaft edge finishing and ... Shaft fit سندانی, etc., Bush, head, shaft, etc. fully 30 cm., the Foley, 90 cm., the Horseshoe, the back of the door, etc. bolts, anvil, etc. bolt and nut armpit. bolt and nut, cone crusher, etc. hammer بهرینگر HS7, etc. hammer بهرینگر HS10, etc. hammer HS10 منگنزی, etc. چکشHS10 منگنزی molybdenum. hammer HS10 نایهارد, etc. hammer HS7 منگنزی, etc. hammer HS7 نایهارد, strap retainer, hammer, HS10, etc. magazine بهرینگر HS10, etc. armpit strap, 25*25 in. armpit strap, 25*25, negating the. armpit, 20*25, etc. Armpit, 20*25, negating the, armpit, strap, triangular, etc. armpit strap triangular negating. procedural anvil HS10, etc. armpit strap square HS10, etc. armpit strap rectangular HS10, etc. armpit, strap-negating, HS10, etc. kollam HS10, etc. hammer sand Maker, hammer sand Maker منگنزی more. hammer sand Maker منگنزی molybdenum, anvil, sand Maker, rotor, sand Maker, ball bearings, sand Maker, shaft and flange are assembled, sand Maker, shaft sand Maker, flange, sand Maker, Foley, sand Maker, etc. the Bush inside the flange, sand Maker, etc. Flange, fixed, sand Maker, pod shaft sand Maker, complete nut shaft sand Maker, بازرویی small and large sand Maker, wrench shaft sand Maker, the two screws being adjusted, sand Maker, valve, sand Maker, door clamps, sand Maker, Bosch, basic Electric, sand Maker, robes, rotor, sand Maker, " rotor 1/18 sand Maker, ceiling 1/2 sand Maker, ceiling 1/3 sand Maker, bumpers, sand Maker, armpit, strap, overhead, sand Maker, shoot the middle sand Maker, shoot the output of sand Maker, shoot the incoming sand Maker, etc. Hinge fixed and movable sand Maker, pin hammer sand Maker, screw eye, sand Maker, screw and nut, sand Maker, hammer Parker منگنزی, etc., hammer, Parker, 103, etc., hammer, Parker, 104, etc., hammer, Parker, 3, etc.", Parker, 104, etc.", Parker, 103, etc., the disc rotor, Parker, 103, etc., the disc rotor, Parker, 104, etc. brachial Parker 103 in. jib, Parker, 104, etc. کانکیو and mantel, etc. کانکیو منگنزی, etc. کانکیو منگنزی molybdenum. mantel منگنزی., the mantel منگنزی molybdenum. کانکیو 2, a کانکیو 4, etc. کانکیو 5, etc. کانکیو 5/6, etc. کانکیو 7, etc. کانکیو 8, a mantel 2 in. mantel 4., the tops loose and withtheme the loose, das, color, etc. هدسنتر, etc. potted, etc. اورینگ, etc. اسپیسر., the Bosch stainless steel, Bosch اکسنتریک., the Bush Spider. liner, piston, etc. Bush Foley, steel, etc. Bush Foley, electro-motor, Bush Congress. آچارهای main and wedge, etc., bearing 2219, etc. bearing 7219, etc. gear کرانویل, etc., gear, pinion, ring, duster, cast iron, ring کرانویل, ring nut, shaft., the shaft, housing, etc. main shaft, هیدروکن., the Foley, housing, etc. fully electro-motor, pod, head, shaft, etc. Fiber bed کرانویل, etc. fiber duster, etc. saucers Bush Foley-ferrous, nut head, shaft, etc. plate, piston, etc. pocking with. پالونی. shell, housing, etc., plunger, etc. کسه felt the head of the shaft., the bolts کانکیو and potted in. bolts. category, engine, Cup, Spider, etc. pan هیدروست, etc., floor, round, stainless steel, etc., floor, round, lens, etc., floor, round bed, washer cap housing, etc. the gasket داسکالر, etc., washer, potted, etc. gasket, housing, etc. the Gasket ring کرانویل, shoulders, jaw stone crusher, jaw crusher, etc. jaw strap jaw crusher, etc. Bearing crusher, jaw, shoulders, jaw 55*80 fixed, shoulder, jaw, 55*80 movable, shoulder, jaw, 30 x 125, shoulders, jaw 90*40 short, shoulder, jaw, 90*40, etc., shoulder, jaw, 45*65, shoulders, jaw 50*30, etc., shoulder, jaw, 20 x 42, shoulders, jaw 90*110ثابت, shoulders, jaw 90*110 movable, the jaw strap 63*100., the jaw strap, 55*80, etc. the jaw strap 20*42, shoulders, jaw 30*125 fixed, the shoulder, the jaw 30*125 movable, a shoulder fixed jaw 63*100 fixed, the shoulder, the movable jaw 63*100, shoulders fixed jaw 80*100(dimensions 107*145 cm), the shoulder fixed jaw 80*100(dimensions 100*127.5 cm)Etc. bearing 90*110, etc. bearing 63*100., the bearing 55*80., the bearing 45*65 " screen, push the jaw in. shaft, crank, jaw, etc., studs, long and short jaw, the back of the jaw, etc., gearbox, a book, etc., gearbox, SN2, etc., gearbox, SN3, etc., gearbox, SN4, etc., gear, solar, gearbox, SN, etc. Bush, gearbox, SN, etc. shaft, gearbox, SN, etc. the belt A, belt B, belt C, claw arm, Marini, etc., tiller arm industry, pick, Marini, etc., pick industries. Luciano الواتور, etc. started الواتور, etc., chains, الواتور, etc., rubber conveyor belt, etc. Belt conveyor, conveyor, rubber, conveyer, etc., bar, conveyer, etc., rubber conveyor تایروک, etc., rubber conveyor belt, sahand, etc., rubber conveyor, Dena, etc. rubber conveyor belt. lace vibrating Tabriz, netting, vibrating screen, sabzevar, Khorasan, Iran lace vibrating ferrous netting, vibrating screen, steel, etc. netting, vibrating springs, 1 to 100, etc. رولیک conveyor, etc. رولیک, conveyer, etc. رولیک bearing replacement, etc. رولیک bearings, normal) fastening, belt conveyor, etc. the base رولیک., the base رولیک the Middle, the base رولیک aside, the base رولیک the side welded in. base رولیک the middle of the rivets, etc. base رولیک single hole. Base رولیک sliding under the bar, the base رولیک vestibule, regular, base رولیک vestibule, irregular, etc. base رولیک vestibule hole. رولیک excluded. رولیک fusion, etc. رولیک, stainless steel, etc. رولیک polymer, etc. رولیک, Teflon, etc. رولیک vulcanized rubber. رولیک bumpers, adhesive tape, conveyor belt, etc. glue SC2000

    Extraction Tehran
  • gilsonite (natural bitumen)

    gilsonite (natural bitumen)

    Our company is currently capable of producing three types of Gilsonite in different sizes according to the customer request. 1- Gilsonite micronized powder with a diameter of 80 to 400 mesh and ashes (between zero and 25 percent). 2- Gilsonite lump with ash percentage between Zero and 25. 3- Granulated Gilsonite with a diameter of 30 to 40 meshes. We offer a variety of packaging options based on customer order as follows: 1- (25kg+-5%) multi-layer laminate bags. 2- (25kg+-5%) multi-layer paper bags. 3- (25kg+-5%) multi-layer Sacks. 4- (One-ton) new jumbo bags. All the above products can be wrapped, shrinked, and palletized according to customer’s request. This unique mineral is used in more than 160 products such as Oil well drilling muds, Well Cementing, Drilling Fluid Loss Control, Asphalt and road paving, Foundry, Insulation and Inks and Paint and Chemicals products. Good quality and competitive pricing mechanisms have made us a trustworthy international company. We export the above-mentioned products to almost all regions of the world especially the Middle East. Not only do our competitive prices make us a top provider among other exporting companies, but also the organized, rapid, and safe delivery of the products have augmented the quality of our customer service, and hence promoted the level of our customer’s satisfaction.

    Extraction Tehran
  • Sand کرومیتی duct vent slider cauldron floor,

    Sand کرومیتی duct vent slider cauldron floor,

    Now common sense, industry, sepahan is one of the manufacturers, sand کرومیتی duct exit, the melt valve sliding in the cauldron floor, which is in the 5 grid 10-15-25-33-40% chromite production are that the product is standardized, that is, a large number of consumers are respected, confirm, and has been in sales and consumption is grid 33% chromite. That in addition to domestic consumption, recently out of the country, also exported effortless. The merits and special, unique products of the Company The amount of بازشوندگی 100% is based on the announcement, some customers and consumers are respected very بهتز of the same type, foreign. It is necessary to توضییح that this product in پاتیلهای 5 tons to 140 tons are consumed are. The production of product, quality of our and consumers with confidence of you. Thanks : Management of the company Selim industry sepahan

    Casting and machining Esfahan
  • Established recycling plant, gold . Silver . Palladium and ... from waste electronics

    Established recycling plant, gold . Silver . Palladium and ... from waste electronics

    Advice and established a workshop and recycling plant , gold, silver, platinum and palladium and rhodium, to, thermal, chemical, waste, electrical , electronic , catalyst , concentrate , minerals , milled رادیوگرافیها, etc. in Iran and neighboring countries, along with supply and installation of all equipment in the main workshop includes furnace, melting machine , Silver dial full and the tin bath and the teaching of the theory and practical recycling in the same place the workshop in a process of approximate month draws the minimum investment in Iran . Set up a workshop with at least the main equipment includes a number of grill, fixed with a diameter of 65 cm and a number within the tin bath and also provide information and advice to prepare the location, along with the teaching of the theory and practical all stages of recycling of gold, silver, platinum and palladium and in Tehran, just pay the amount 20میلیون USD in three stages and for the city to add the cost of transportation وذهاب and stay . Be assured, you with any level of education in the same period of recycling, fluent, and with the lowest investment, the owner of professional worth and income, causing you will be . a.khase.azarsim@gmail.com The applicants wish, they can request a plan to overcome their via email or fax or telegram to be sent . For each province in proportion to population more than 1 up to 2 workshop setup will not . Prepared in cooperation and consultation with organizations waste the provinces . Email a.khase.azarsim@gmail.com and yaghob67@hotmail.com Kanal azarsimbazyaft@

    Extraction Tehran
  • Nozzle تاندیش قندانی

    Nozzle تاندیش قندانی

    Now common sense industry sepahan supplier of all kinds of nozzle, تاندیش as قندانی and استکانی in sizes 11 to 16 in quality, 65%, and -75% to -85% and 95% can be for more information with the unit sale of the company to issue 03136644312 contact please. Nozzle تاندیش the direction of outflow of the melt from تاندیش (cauldron of the middle) to the inside of the mold copper (کریستالیزاتور) machine continuous casting.That based on the time of casting, temperature, and conditions there melting % زیرکونیای(اینزرت) and analysis of the bricks in it are different. Brick and اینزرت zirconia, typically with different percentages of alumina can be made in two types of meal and drink. in the type of drink due to the lack of push presses from the analysis, the better and stronger, in order to cope with the melt used. Gap created between the اینزرت zirconia bricks can be used with presses up to each other with a sealing grout. part of the brain (اینزرت ) inside the bricks of ceramic (zirconia) is the pressure and temperature of the top of the melt, it is well tolerate . According to the conditions of the melt percent, اینزرت used normally from 65% to 95%. Nozzle تاندیش for use before the melt should be from both sides (the inside part of the تاندیش ) and اینزرت from the outside good ago be heated, because in the event of non-compliance with this point, causing shock, seeing the nozzle and breaks down the brick or leave, removal, or filling the lips, اینزرت . Before تحلیه melt in تاندیش inside the duct nozzle تاندیش from the sand, refractories such as chromite, fill, slag, and other impurities enter the melt نشضود and melted, under controlled conditions, واردقالب. Brick and اینزرت nozzle تاندیش in the form of there are different also based on the speed of casting and the dimensions of the mould hole diameter part zirconia is also changed . According to the different seasons of the year due to a drop in the temperature of the melt diameter اینزرت زیرکونایی also change . Now common sense industry sepahan supplier of all kinds of nozzle, تاندیش in the model, قندانی and استکانی in sizes 11 to 16 can be, if needed, with دفترفروش the company to issue 03136644312 contact please . Nozzle تاندیش on the floor of the تاندیش located, and the number of packages to نعداد casting lines. Also, due to the amount of tonnage of steel castings, the percentage of zirconia and alumina ولبلوک is changed . According to the cross sections of billets, casting, and the conditions of melting can be the diameter of the nozzle تاندیش the direction of outflow of the melt determined . The quality of the zirconia used in the nozzle تاندیش very important because it increases or decreases the speed of casting can be, which eventually causes the tearing line of the casting and stop. Nozzle تاندیش to a few models, is consumed . 1 - nozzle تاندیش قندانی with zirconia all the 2-nozzle تاندیش استکانی with zirconia half height 3 - nozzle تاندیش with zirconia all the 4 - nozzle تاندیش all zirconia The nozzles in two models of Percy and مونتاژشده with the mortar green . ولبلوک the nozzle, both round and rectangular are available. ولبلوک nozzle تاندیش due to the amount of tonnage of steel castings made with different percentages, alumina available .

    Casting and machining Esfahan
  • Crusher spare parts, jaw crusher

    A variety of shoulder, jaw, jaw strap, and bearings, of the crusher Shoulder jaw 55*80 fixed, shoulder, jaw 55*80, injections, etc., shoulder, jaw 30*125, shoulders heavy 90*40 short, shoulders heavy 90*40. shoulder heavy 45*65, shoulders فک 50*30, etc., shoulder, jaw, 20 x 42 In. shoulder heavy 90*110ثابت, shoulders heavy 90*110 movable, jaw strap 63*100., the jaw strap, 55*80, etc. jaw strap 20*42, shoulders فک 30*125 fixed, shoulder, jaw 30*125 families, etc. Shoulder jaw fixed 63*100 fixed, shoulder, jaw, families, 63*100, shoulders fixed jaw 80*100(dimensions 107*145 cm ), the shoulder fixed jaw 80*100(dimensions 100 x 127.5 cm ), the bearing 90*110, etc. bearing 63*100., the bearing 55*80., the bearing 45*65 For information, update, technical experts, please contact us. Tel : +98 21 55798847 Fax : +98 21 55750811 Mobile : +98 912 5126319 Email : info@pnicco.com www.pnicco.com Line.me/pnicco Instagram.com/parsnovinco Production lines, sand, installations, sand etc. parts, anti-abrasion, mines, mines, sand etc. parts, crusher sand, crusher spare parts, hammer, etc. parts, crusher, cone crusher, etc. crusher parts, sand Maker, crusher parts بهرینگر HS, parts, crusher Parker, crusher parts هازماک, etc. crusher spare parts Goodwin, components of jaw crusher, components crusher هیدروکن the ... hammer, cone crusher etc., hammer cone crusher, 120, etc., hammer cone crusher, 180, etc., hammer cone crusher, the 240, etc., hammer, cone crusher منگنزی the ... hammer, cone crusher نایهارد, etc. Lock and load, hammer, etc. lock and load cone crusher, 120, etc. lock and load cone crusher, 180, etc. anvil cone crusher, etc. anvil u. anvil Double screw cone crusher, etc. anvil the two screws نایهارد, etc. anvil, twist, anvil, screw نایهارد, etc. anvil, four page., the anvil, slider, cone crusher, etc. anvil, slider, 120., the anvil, slider, 180., the magazine anvil cone crusher, etc. lock and load the anvil 120., the magazine anvil 180, etc. fit سندانی and ... bearing cone crusher, the ... rotors, cone crusher, etc. the robes of the rotor, the robes of the rotor 120., the robes of the rotor 180, etc. robes, rotor, cone crusher, double-sided, armpit, strap, cone crusher, etc. armpit, strap iron, etc. Armpit strap, cast iron, etc. edge finishing and Cone Crusher, etc. ceiling cone crusher., the crescent, round, rotor, tile 01 In. tile, 20*20, etc., tile, 02, etc. bumpers, 23*17 etc., the flange edge of the thin and thick, etc., springs, hammers, springs, hammer, 120., the springs, the hammer 180, pin gowns rotor, shell bearings, ring inside the bearing Bush behind Foley, ... Bush کونیک Foley, ... liner behind the bearing cap, simple, door, accessories., cap, cap, compound, etc. or regulating edge finishing and ... height سندانی., the shaft cone crusher, etc. the shaft edge finishing and ... Shaft fit سندانی, etc., Bush, head, shaft, etc. fully 30 cm., the Foley, 90 cm., the Horseshoe, the back of the door, etc. bolts, anvil, etc. bolt and nut armpit. bolt and nut, cone crusher, etc. hammer بهرینگر HS7, etc. hammer بهرینگر HS10, etc. hammer HS10 منگنزی, etc. چکشHS10 منگنزی molybdenum. hammer HS10 نایهارد, etc. hammer HS7 منگنزی, etc. hammer HS7 نایهارد, strap retainer, hammer, HS10, etc. magazine بهرینگر HS10, etc. armpit strap, 25*25 in. armpit strap, 25*25, negating the. armpit, 20*25, etc. Armpit, 20*25, negating the, armpit, strap, triangular, etc. armpit strap triangular negating. procedural anvil HS10, etc. armpit strap square HS10, etc. armpit strap rectangular HS10, etc. armpit, strap-negating, HS10, etc. kollam HS10, etc. hammer sand Maker, hammer sand Maker منگنزی more. hammer sand Maker منگنزی molybdenum, anvil, sand Maker, rotor, sand Maker, ball bearings, sand Maker, shaft and flange are assembled, sand Maker, shaft sand Maker, flange, sand Maker, Foley, sand Maker, etc. the Bush inside the flange, sand Maker, etc. Flange, fixed, sand Maker, pod shaft sand Maker, complete nut shaft sand Maker, بازرویی small and large sand Maker, wrench shaft sand Maker, the two screws being adjusted, sand Maker, valve, sand Maker, door clamps, sand Maker, Bosch, basic Electric, sand Maker, robes, rotor, sand Maker, " rotor 1/18 sand Maker, ceiling 1/2 sand Maker, ceiling 1/3 sand Maker, bumpers, sand Maker, armpit, strap, overhead, sand Maker, shoot the middle sand Maker, shoot the output of sand Maker, shoot the incoming sand Maker, etc. Hinge fixed and movable sand Maker, pin hammer sand Maker, screw eye, sand Maker, screw and nut, sand Maker, hammer Parker منگنزی, etc., hammer, Parker, 103, etc., hammer, Parker, 104, etc., hammer, Parker, 3, etc.", Parker, 104, etc.", Parker, 103, etc., the disc rotor, Parker, 103, etc., the disc rotor, Parker, 104, etc. brachial Parker 103 in. jib, Parker, 104, etc. کانکیو and mantel, etc. کانکیو منگنزی, etc. کانکیو منگنزی molybdenum. mantel منگنزی., the mantel منگنزی molybdenum. کانکیو 2, a کانکیو 4, etc. کانکیو 5, etc. کانکیو 5/6, etc. کانکیو 7, etc. کانکیو 8, a mantel 2 in. mantel 4., the tops loose and withtheme the loose, das, color, etc. هدسنتر, etc. potted, etc. اورینگ, etc. اسپیسر., the Bosch stainless steel, Bosch اکسنتریک., the Bush Spider. liner, piston, etc. Bush Foley, steel, etc. Bush Foley, electro-motor, Bush Congress. آچارهای main and wedge, etc., bearing 2219, etc. bearing 7219, etc. gear کرانویل, etc., gear, pinion, ring, duster, cast iron, ring کرانویل, ring nut, shaft., the shaft, housing, etc. main shaft, هیدروکن., the Foley, housing, etc. fully electro-motor, pod, head, shaft, etc. Fiber bed کرانویل, etc. fiber duster, etc. saucers Bush Foley-ferrous, nut head, shaft, etc. plate, piston, etc. pocking with. پالونی. shell, housing, etc., plunger, etc. کسه felt the head of the shaft., the bolts کانکیو and potted in. bolts. category, engine, Cup, Spider, etc. pan هیدروست, etc., floor, round, stainless steel, etc., floor, round, lens, etc., floor, round bed, washer cap housing, etc. the gasket داسکالر, etc., washer, potted, etc. gasket, housing, etc. the Gasket ring کرانویل, shoulders, jaw stone crusher, jaw crusher, etc. jaw strap jaw crusher, etc. Bearing crusher, jaw, shoulders, jaw 55*80 fixed, shoulder, jaw, 55*80 movable, shoulder, jaw, 30 x 125, shoulders, jaw 90*40 short, shoulder, jaw, 90*40, etc., shoulder, jaw, 45*65, shoulders, jaw 50*30, etc., shoulder, jaw, 20 x 42, shoulders, jaw 90*110ثابت, shoulders, jaw 90*110 movable, the jaw strap 63*100., the jaw strap, 55*80, etc. the jaw strap 20*42, shoulders, jaw 30*125 fixed, the shoulder, the jaw 30*125 movable, a shoulder fixed jaw 63*100 fixed, the shoulder, the movable jaw 63*100, shoulders fixed jaw 80*100(dimensions 107*145 cm), the shoulder fixed jaw 80*100(dimensions 100*127.5 cm)Etc. bearing 90*110, etc. bearing 63*100., the bearing 55*80., the bearing 45*65 " screen, push the jaw in. shaft, crank, jaw, etc., studs, long and short jaw, the back of the jaw, etc., gearbox, a book, etc., gearbox, SN2, etc., gearbox, SN3, etc., gearbox, SN4, etc., gear, solar, gearbox, SN, etc. Bush, gearbox, SN, etc. shaft, gearbox, SN, etc. the belt A, belt B, belt C, claw arm, Marini, etc., tiller arm industry, pick, Marini, etc., pick industries. Luciano الواتور, etc. started الواتور, etc., chains, الواتور, etc., rubber conveyor belt, etc. Belt conveyor, conveyor, rubber, conveyer, etc., bar, conveyer, etc., rubber conveyor تایروک, etc., rubber conveyor belt, sahand, etc., rubber conveyor, Dena, etc. rubber conveyor belt. lace vibrating Tabriz, netting, vibrating screen, sabzevar, Khorasan, Iran lace vibrating ferrous netting, vibrating screen, steel, etc. netting, vibrating springs, 1 to 100, etc. رولیک conveyor, etc. رولیک, conveyer, etc. رولیک bearing replacement, etc. رولیک bearings, normal) fastening, belt conveyor, etc. the base رولیک., the base رولیک the Middle, the base رولیک aside, the base رولیک the side welded in. base رولیک the middle of the rivets, etc. base رولیک single hole. Base رولیک sliding under the bar, the base رولیک vestibule, regular, base رولیک vestibule, irregular, etc. base رولیک vestibule hole. رولیک excluded. رولیک fusion, etc. رولیک, stainless steel, etc. رولیک polymer, etc. رولیک, Teflon, etc. رولیک vulcanized rubber. رولیک bumpers, adhesive tape, conveyor belt, etc. glue SC2000

    Extraction Tehran
  • Nozzle تاندیش 75% of the zirconia in sizes 12-12.5-13-13.5-14-14.5-15-15.5-16

    Nozzle تاندیش 75% of the zirconia in sizes 12-12.5-13-13.5-14-14.5-15-15.5-16

    Now common sense industry sepahan supplier of all kinds of nozzle, تاندیش with excellent quality. That in size and quality, ranging from 60 to 95% zirconia to be provided. Nozzle تاندیش on the floor of the تاندیش located, and the number of packages to نعداد casting lines. Also, due to the amount of tonnage of steel castings, the percentage of zirconia and alumina ولبلوک is changed . According to the cross sections of billets, casting, and the conditions of melting can be the diameter of the nozzle تاندیش the direction of outflow of the melt determined . The quality of the zirconia used in the nozzle تاندیش very important because it increases or decreases the speed of casting can be, which eventually causes the tearing line of the casting and stop. Nozzle تاندیش to a few models, is consumed . 1 - nozzle تاندیش قندانی with zirconia all the 2-nozzle تاندیش استکانی with zirconia half height 3 - nozzle تاندیش with zirconia all the 4 - nozzle تاندیش all zirconia The nozzles in two models of Percy and مونتاژشده with the mortar green . ولبلوک the nozzle, both round and rectangular are available. ولبلوک nozzle تاندیش due to the amount of tonnage of steel castings made with different percentages, alumina available . Percent zirconia nozzle تاندیش استکانی model Indian 96%. In the factory, the company Selim industry sepahan line preparation nozzle تاندیش created where the nozzle تاندیش with different sizes assembled . Prices nozzle تاندیش reliable supply by the company is competitive and has its quality guaranteed. This company is ready to send nozzle تاندیش in the trial to the factory of production of steel ingot brosh continuous casting. This nozzle تاندیش in the method of production of steel ingot as a continuous casting – continuous used گیردند.

    Casting and machining Esfahan
  • Crusher spare parts, هیدروکن

    A variety of mantel, etc. کانکیو, etc. هدسنتر, etc. potted, and the tops loose and withtheme shell crusher, هیدروکن کانکیو 4 shorter. کانکیو 2 shorter. کانکیو 7 ,The کانکیو 5, etc. کانکیو 6.5 in. کانکیو 8, etc. Montale 2, the Montale 4, reliable production of steel منگنزی and منگنزی molybdenum. کانکیو and mantel., the tops loose and withtheme the loose, das, color, etc. هدسنتر, etc. potted اورینگ, etc. اسپیسر., the Bosch stainless steel, Bosch اکسنتریک Bush Spider. liner, piston, etc. Bush Foley, steel Bush, Foley, electro-motor, Bush Congress. آچارهای main and wedge Bearings 2219, etc. bearing 7219, etc. gear کرانویل, etc., gear, pinion Rims, duster, cast iron, ring کرانویل, ring nut, shaft Shaft, housing, etc. main shaft, هیدروکن., the Foley housing Foley, electro-motor, pod, head, shaft, etc., fiber bed کرانویل Fiber duster, etc. saucers Bush Foley-ferrous, nut head shaft Plate, piston, etc. pocking with. پالونی. shell housing The piston, etc. کسه felt the head of the shaft., the bolts کانکیو and potted Bolts main etc. tags, engine, Cup, Spider, etc. pan هیدروست Floor, round, stainless steel, floor, round, lens, etc., floor, round bed, washer cap housing Washer داسکالر, etc., washer, potted, etc. gasket, housing, etc. the Gasket ring کرانویل For information, update, technical experts, please contact us. Tel : +98 21 55798847 Fax : +98 21 55750811 Mobile : +98 912 5126319 Email : info@pnicco.com www.pnicco.com Line.me/pnicco Instagram.com/parsnovinco Production lines, sand, installations, sand etc. parts, anti-abrasion, mines, mines, sand etc. parts, crusher sand, crusher spare parts, hammer, etc. parts, crusher, cone crusher, etc. crusher parts, sand Maker, crusher parts بهرینگر HS, parts, crusher Parker, crusher parts هازماک, etc. crusher spare parts Goodwin, components of jaw crusher, components crusher هیدروکن the ... hammer, cone crusher etc., hammer cone crusher, 120, etc., hammer cone crusher, 180, etc., hammer cone crusher, the 240, etc., hammer, cone crusher منگنزی the ... hammer, cone crusher نایهارد, etc. Lock and load, hammer, etc. lock and load cone crusher, 120, etc. lock and load cone crusher, 180, etc. anvil cone crusher, etc. anvil u. anvil Double screw cone crusher, etc. anvil the two screws نایهارد, etc. anvil, twist, anvil, screw نایهارد, etc. anvil, four page., the anvil, slider, cone crusher, etc. anvil, slider, 120., the anvil, slider, 180., the magazine anvil cone crusher, etc. lock and load the anvil 120., the magazine anvil 180, etc. fit سندانی and ... bearing cone crusher, the ... rotors, cone crusher, etc. the robes of the rotor, the robes of the rotor 120., the robes of the rotor 180, etc. robes, rotor, cone crusher, double-sided, armpit, strap, cone crusher, etc. armpit, strap iron, etc. Armpit strap, cast iron, etc. edge finishing and Cone Crusher, etc. ceiling cone crusher., the crescent, round, rotor, tile 01 In. tile, 20*20, etc., tile, 02, etc. bumpers, 23*17 etc., the flange edge of the thin and thick, etc., springs, hammers, springs, hammer, 120., the springs, the hammer 180, pin gowns rotor, shell bearings, ring inside the bearing Bush behind Foley, ... Bush کونیک Foley, ... liner behind the bearing cap, simple, door, accessories., cap, cap, compound, etc. or regulating edge finishing and ... height سندانی., the shaft cone crusher, etc. the shaft edge finishing and ... Shaft fit سندانی, etc., Bush, head, shaft, etc. fully 30 cm., the Foley, 90 cm., the Horseshoe, the back of the door, etc. bolts, anvil, etc. bolt and nut armpit. bolt and nut, cone crusher, etc. hammer بهرینگر HS7, etc. hammer بهرینگر HS10, etc. hammer HS10 منگنزی, etc. چکشHS10 منگنزی molybdenum. hammer HS10 نایهارد, etc. hammer HS7 منگنزی, etc. hammer HS7 نایهارد, strap retainer, hammer, HS10, etc. magazine بهرینگر HS10, etc. armpit strap, 25*25 in. armpit strap, 25*25, negating the. armpit, 20*25, etc. Armpit, 20*25, negating the, armpit, strap, triangular, etc. armpit strap triangular negating. procedural anvil HS10, etc. armpit strap square HS10, etc. armpit strap rectangular HS10, etc. armpit, strap-negating, HS10, etc. kollam HS10, etc. hammer sand Maker, hammer sand Maker منگنزی more. hammer sand Maker منگنزی molybdenum, anvil, sand Maker, rotor, sand Maker, ball bearings, sand Maker, shaft and flange are assembled, sand Maker, shaft sand Maker, flange, sand Maker, Foley, sand Maker, etc. the Bush inside the flange, sand Maker, etc. Flange, fixed, sand Maker, pod shaft sand Maker, complete nut shaft sand Maker, بازرویی small and large sand Maker, wrench shaft sand Maker, the two screws being adjusted, sand Maker, valve, sand Maker, door clamps, sand Maker, Bosch, basic Electric, sand Maker, robes, rotor, sand Maker, " rotor 1/18 sand Maker, ceiling 1/2 sand Maker, ceiling 1/3 sand Maker, bumpers, sand Maker, armpit, strap, overhead, sand Maker, shoot the middle sand Maker, shoot the output of sand Maker, shoot the incoming sand Maker, etc. Hinge fixed and movable sand Maker, pin hammer sand Maker, screw eye, sand Maker, screw and nut, sand Maker, hammer Parker منگنزی, etc., hammer, Parker, 103, etc., hammer, Parker, 104, etc., hammer, Parker, 3, etc.", Parker, 104, etc.", Parker, 103, etc., the disc rotor, Parker, 103, etc., the disc rotor, Parker, 104, etc. brachial Parker 103 in. jib, Parker, 104, etc. کانکیو and mantel, etc. کانکیو منگنزی, etc. کانکیو منگنزی molybdenum. mantel منگنزی., the mantel منگنزی molybdenum. کانکیو 2, a کانکیو 4, etc. کانکیو 5, etc. کانکیو 5/6, etc. کانکیو 7, etc. کانکیو 8, a mantel 2 in. mantel 4., the tops loose and withtheme the loose, das, color, etc. هدسنتر, etc. potted, etc. اورینگ, etc. اسپیسر., the Bosch stainless steel, Bosch اکسنتریک., the Bush Spider. liner, piston, etc. Bush Foley, steel, etc. Bush Foley, electro-motor, Bush Congress. آچارهای main and wedge, etc., bearing 2219, etc. bearing 7219, etc. gear کرانویل, etc., gear, pinion, ring, duster, cast iron, ring کرانویل, ring nut, shaft., the shaft, housing, etc. main shaft, هیدروکن., the Foley, housing, etc. fully electro-motor, pod, head, shaft, etc. Fiber bed کرانویل, etc. fiber duster, etc. saucers Bush Foley-ferrous, nut head, shaft, etc. plate, piston, etc. pocking with. پالونی. shell, housing, etc., plunger, etc. کسه felt the head of the shaft., the bolts کانکیو and potted in. bolts. category, engine, Cup, Spider, etc. pan هیدروست, etc., floor, round, stainless steel, etc., floor, round, lens, etc., floor, round bed, washer cap housing, etc. the gasket داسکالر, etc., washer, potted, etc. gasket, housing, etc. the Gasket ring کرانویل, shoulders, jaw stone crusher, jaw crusher, etc. jaw strap jaw crusher, etc. Bearing crusher, jaw, shoulders, jaw 55*80 fixed, shoulder, jaw, 55*80 movable, shoulder, jaw, 30 x 125, shoulders, jaw 90*40 short, shoulder, jaw, 90*40, etc., shoulder, jaw, 45*65, shoulders, jaw 50*30, etc., shoulder, jaw, 20 x 42, shoulders, jaw 90*110ثابت, shoulders, jaw 90*110 movable, the jaw strap 63*100., the jaw strap, 55*80, etc. the jaw strap 20*42, shoulders, jaw 30*125 fixed, the shoulder, the jaw 30*125 movable, a shoulder fixed jaw 63*100 fixed, the shoulder, the movable jaw 63*100, shoulders fixed jaw 80*100(dimensions 107*145 cm), the shoulder fixed jaw 80*100(dimensions 100*127.5 cm)Etc. bearing 90*110, etc. bearing 63*100., the bearing 55*80., the bearing 45*65 " screen, push the jaw in. shaft, crank, jaw, etc., studs, long and short jaw, the back of the jaw, etc., gearbox, a book, etc., gearbox, SN2, etc., gearbox, SN3, etc., gearbox, SN4, etc., gear, solar, gearbox, SN, etc. Bush, gearbox, SN, etc. shaft, gearbox, SN, etc. the belt A, belt B, belt C, claw arm, Marini, etc., tiller arm industry, pick, Marini, etc., pick industries. Luciano الواتور, etc. started الواتور, etc., chains, الواتور, etc., rubber conveyor belt, etc. Belt conveyor, conveyor, rubber, conveyer, etc., bar, conveyer, etc., rubber conveyor تایروک, etc., rubber conveyor belt, sahand, etc., rubber conveyor, Dena, etc. rubber conveyor belt. lace vibrating Tabriz, netting, vibrating screen, sabzevar, Khorasan, Iran lace vibrating ferrous netting, vibrating screen, steel, etc. netting, vibrating springs, 1 to 100, etc. رولیک conveyor, etc. رولیک, conveyer, etc. رولیک bearing replacement, etc. رولیک bearings, normal) fastening, belt conveyor, etc. the base رولیک., the base رولیک the Middle, the base رولیک aside, the base رولیک the side welded in. base رولیک the middle of the rivets, etc. base رولیک single hole. Base رولیک sliding under the bar, the base رولیک vestibule, regular, base رولیک vestibule, irregular, etc. base رولیک vestibule hole. رولیک excluded. رولیک fusion, etc. رولیک, stainless steel, etc. رولیک polymer, etc. رولیک, Teflon, etc. رولیک vulcanized rubber. رولیک bumpers, adhesive tape, conveyor belt, etc. glue SC2000

    Extraction Tehran
  • Powder mould casting

    Powder mould casting

    From the supply by the company of common sense, industry, sepahan powder mould casting . Powder casting that name, powder form, etc., powder, oil, curry known to facilitate the passage melted in the midst of casting mold used. Powder casting plays an important role in continuous casting of steel plays one of the factor, important for continuous casting, smooth melt. Powder casting to the level of the top of the melt to be poured manually or automatic Powder casting, the melting point is low can be in تیجه very quick-to-liquid conversion, and the layer of liquid composed of the lubrication well to the casting process can do Powder mould casting is an effective alternative for oil casting is previously used .

    Casting and machining Esfahan
Jooyeshgar's Sponsers
  • فولادبست ایرانیان تولید کننده  انواع بست های داکتیل  و عرضه  ملزومات  داربست
  • Karapost - کاراپست
  • nozhan - نوژان
  • Elearnever - آکادمی مجازی ایرانیان
  • شهرک علمی و تحقیقاتی اصفهان
{/user}
  • Jooyeshgar
  • Price
  • About Us
  • Contact Us