Cisco fiber optic module

Wall racks are racks with small dimensions and the ability to be installed on the wall, which are used to install all kinds of active and passive equipment, including all kinds of switches, in the low-density parts of the access layer. Also, in cases where there is not enough space to use standing racks or in small networks where standing racks are not used, wall racks are a suitable option for protecting network equipment. Technical Specifications Light weight and solid structure Equipped with a spring pin system for easy separation of the front door Glass front door with strong metal frame It has a cable passage cover panel with a hair brush in the upper part behind the rack Switch lock system to prevent unauthorized access Air conditioning slots in the front of the roof and the bottom of the rack Plating cover of adapters and supports Cable passage in the ceiling and floor for ease of cabling Installation position of 1 fan on the roof of the rack

Specifications\r\n\r\n Manufactured from strong and rust-proof galvanized sheet\r\n Electrostatic paint coating resistant to environmental conditions\r\n IP55 protection grade\r\n Suitable for installing 19-inch equipment\r \n It has a cable entry in the bottom of the rack with the possibility of using cable glands in three different sizes. Hot air\r\n Strong adapters with plated coating and printed unit numbers\r\n Anti-theft door system\r\n Quality handle with the possibility of installing a padlock for greater security\r\n Double-glazed sloping roof for protection from rain and direct sunlight\r\n possibility of installation on the wall\r\n possibility of installation on the mast with a metal installation kit\r\n possibility of installation on the ground

What is a network rack?\r\nIn order to answer the question of what is a network rack, it should be said that a network rack is a metal enclosure and one of the most important passive network equipment, which by accommodating various network components and equipment such as servers, routers, switches and patch panels, gives order to the network and It takes care of these tools and devices against physical damage and even theft. The use of a rack allows many equipments to be collected in one specific point, which helps to occupy less space in the work environment. Of course, the size of the racks is also different and is measured and expressed with the unit of measurement.\r\n\r\nStandard services:\r\nEngineering and design services\r\nLaser cutting services with fiber technology\r\nCNC punch services\r\nCNC bending services\r\nElectrostatic powder coating services\r\n\r\nProduction abilities:\r\nAll kinds of metal and aluminum parts and boxes\r\nAll kinds of server racks, network\r\nAll kinds of outdoor racks and cabinets\r\nAll types of cabinets and electrical panels\r\nThe body of all types of banking and information kiosks\r\nAll kinds of subracks and rack mount cases\r\nThe body of all types of fueling devices\r\nThe body of all types of compressors\r\nThe body of all types of ATMs

This small box is used to connect drop cable and ONU to FTTX network through optical fiber port. This box supports fusion, distribution, mechanical connection and wall mounting. This optical fiber box can install 2 SC adapters for Pigtel and Fusion.\r\n Nira optical fiber boxes (OTO) are designed and produced in 2COR, 4COR sizes.\r\nWithout braids, it is suitable for pigtail makeup.\r\nMade of new raw materials (ABS)\r\nMatch the color of the door\r\nVery beautiful and beautiful in the view of the unit

Suitable for single mode and multimode fibers\r\n• Lightweight and durable ABS body\r\n• Cassette capacity of 24 khr optical fiber\r\n• It has a transparent cover and the observation of fibers without the need to open the cover\r\n• Compliance with the optimal bending radius for the fiber\r\n• Ease of use of Pigtail\r\n• Suitable for ribbon and non-ribbon fiber cables\r\n• Multi-layer structure\r\n• Key feature: strength

Optical fiber cassette or Splice Tray is a device in which the optical fiber is placed after fusion and mechanical connection. Optical fiber cassettes are usually used in patch panel, ODF (fiber distribution frame), fiber distribution boxes and fiber optic joints designed for indoor and outdoor use. Longxing optical fiber cassettes have a light and durable body and are available in different capacities of 12 and 24 cores. These cassettes can be used for both Tight-buffered and Loose Tube cables and are suitable for single-mode and multi-mode fibers.\r\n\r\nSuitable for single mode and multimode fibers\r\n• Lightweight and durable ABS body\r\n• Cassette capacity of 24 khr optical fiber\r\n• It has a transparent cover and the observation of fibers without the need to open the cover\r\n• Compliance with the optimal bending radius for the fiber\r\n• Ease of use of pigtail\r\n• Suitable for ribbon and non-ribbon fiber cables\r\n• Multi-layered structure\r\n• Key feature: strength

Brand name: RHYZEN\r\nPart number: RMC-872\r\n\r\nTechnical Specifications :\r\nSC/SM/DX/1310nm/20KM\r\n10/100/1000\r\nBuy immediately\r\nThe media converter does not have a complex technology, but the material used in it is effective in determining the price. For example, the size of the adapter, the thickness of its metal frame sheet, etc.\r\nFor example, sometimes the price difference of one media converter adapter is about 2.7 dollars with another media converter adapter.\r\n\r\nI am also available on WhatsApp and Telegram 09307458764

Brand name: Netlink\r\nPart number: HTB-GS-03\r\n\r\nTechnical Specifications :\r\nSC/SM/DX/1310nm/20KM\r\n10/100/1000\r\n\r\nBuy immediately\r\nI am also available on WhatsApp and Telegram 09307458764