پوشرنگ all plastic standard

پوشرنگ all plastic standard

Code :NPS 500نام product :پوشرنگ plastic standard پوشرنگ all plastic, standard, opaque, نانوپوش on the base adds body & the vinyl acetate produced . This پوشرنگ the direction of all surfaces, plaster, cement etc. concrete, brick, etc. آردواز and the wooden interior of the building is used . Quick drying, pen curd fit, excellent adhesion and ... ease of implementation and the ability to dilute with water http://www.nanopush.net تلفن factory : (At the bottom of the ad) ., the ability to change the color with mom, paint, plastic, etc. having an unpleasant odor, and compatibility with the environment, the benefits of this پوشرنگ can be.

استاندارد :the standard 289 national – ASTMخواص. effects and benefits : نانو technology

%100 washable

قدرت coverage, excellent

خشک get-rich-quick

قلم curd right\r\site configuration://www.nanopush.net تلفن factory : (At the bottom of the ad)

رقیق with water

چسبندگی excellent

سهولت run

ایجاد cover integrated and seamless

بدون the smell and effects of chemical and 100% Antibacterials

قابلیت adhesion to variety of surfaces, including plaster, cement etc. concrete, brick, etc. آردواز and wooden

مقاوم against any cracking, water-resistant gypsum board of

قابلیت change the color of the mom, paint, plastic,\r\site configuration://www.nanopush.net تلفن factory : (At the bottom of the ad)

غیر-toxic, non-flammable

موارد application : جهت all surfaces ( plaster, cement etc. concrete, brick, etc. آردواز and wooden ) inside the building is used. Excellent resistance to washing, quick drying, pen curd a suitable, dilute with water, excellent adhesion, etc. ease run, not having an unpleasant odor, and compatibility with the environment, the benefits of this پوشرنگ can be .http://www.nanopush.net تلفن factory : (At the bottom of the ad)

روش and the amount consumed : قبل of coloring through the separation of the points loose, ... open gaps and seams, separate out the colors of the Shell have been. surface preparation نماییـد . Then, if needed, with plaster or putty, level subtasks smooth and then sanding your work . The final level before the coloring can be clean and without any contamination, dust or grease to be .

1. After surface preparation, etc. پوشرنگ all the plastic matte نانوپوش with the appropriate amount of water diluted), and on the surface apply . The amount of mixing water with پوشرنگ according to the environment temperature, level and below, and is also a means of coloring is different, but in terms of the usual, coloring, the amount of brush 35% – 25% with the roller 10% – 5%, with spray gun up to 40% – 35% can be. 2 . To achieve a level of coloring is uniform and homogeneous, etc. thus, the level under working may be at least 2 to 3 stage, اعمـال پوشرنگ about نیـاز be .http://www.nanopush.net تلفن factory : (At the bottom of the ad)

3 . Apply پوشرنگ in ambient temperature above 10 degrees C, respectively. surface temperature 3 degrees higher than the dew point and humidity less than 80% recommended.

پس of completion of the work, etc. riverbanks. tools for coloring, or materials dumped on the ground with warm water and, if necessary, with soap . To prevent rust, instruments, and equipment coloring with solvent or water rinsed and immediately dried on .