The brake pads from the resistant materials are relatively soft but heat resistant have been formed and the coefficient of friction, dynamic (and generally, the ideal coefficient of friction, static), typically on a metal cross with the use of adhesives with high temperature or rivets, can be installed. Complete assembly (including cover and back), often called a brake pad or brake shoe is called. Coefficient of friction dynamic \"how to\" for the majority of brake pads, the standard is usually in the range of 0.35 to 0.42. This means that a force of 1000 Newton on the pad, a braking force result close to 400 Newton. Some of the pads, racing there are very quality μ 0.55 to 0.62 with the behavior of higher temperature are high. This pad has a high content of iron and are usually from a pad, another that drives the iron is used the better act. Unfortunately, nothing is for FREE not supplied, and the pad, μ, high speed, high covered. However, they are a a much more affordable alternative to materials, exotic / expensive.
با use a bicycle brake cable. behind it, a metal shell that supports mechanical provides, and can cover parts of rubber, in which, when using brakes with rims call takes place. In most applications, vehicle, modern, systems, and the concept is the same, unless rims with discs of solid steel (or sometimes exotic metal) replaced. In addition, the tight metal, usually in the modem, the pad is placed. Fitted when pads wear out,. روتورها contact. causing an annoying noise designed to warn the engine driver that the repair and maintenance of brakes is necessary.
