Colt is a part that is used to hold the milling blade and industrial parts. The Colt nut is used to shrink and tighten the colt. This nut puts the necessary pressure on the colt to tighten it. The ER bullet, also called the full-slit colt, is a conical piece that is placed on the spindle head. Uniform environmental force is applied to the blade or piece to close the cartridge completely. The cartridge is the most accurate device for gripping small diameter parts on the lathe. The bullet consists of a bullet bushing, a pull bar, a cart or a handle to move the pull bar. The bullet bushing is installed at the right end of the lathe spindle. The traction rod passes through the machine spindle and is screwed to the bullet spring clamp. When the traction rod is rotated by the cart, it pulls the bullet into the conical transducer and holds it firmly on the part. They are made of spring steel and according to their type and model, each one is used for a certain size. Colt is one of the main parts of lathe machines. Use firmly and also this holder is a device to connect the tool to the spindle motor shaft for its centrifugation. Tighter the circumference and diameter of the tool circle and keeps it safe. Also, the bolts apply the force on the tool blade and the workpiece evenly to prevent the tool from breaking. Spring
Company | فروشگاه نمونه ساز |
---|---|
Tel | +98 41-0×××4100446 |
Mobile | +98 914×××0446 |
Whatsapp link | |
Website | https://nemonehsaz.com/ |
Country | Iran |
Province | East Azarbaijan |
Address | تبریز |