The section of the steel deck sheet is trapezoidal but ribbed. that these treads and ridges play an effective role in reinforcing and engaging sheet metal and concrete. Steel deck sheets can be produced from thicknesses of 0.70 mil to 2 mil. And the height or depth of the deck is 55 mm, 65 mm, and 75 mm, which is explained on the top of the page about the useful width of the forming output. The shape of the steel deck sheets consists of the depth of the deck sheet or so-called "pitch of the steel deck sheet: to the vertical distance from the upper wing (upper) to the lower wing (lower) of the sheet and the upper wing: the horizontal components of the upper surface of the sheet (protrusion section) - the upper tooth: The edges of the upper wing of the sheet - the lower wing: the horizontal components of the lower surface of the sheet (recessed part) - the lower tooth: the edges of the lower wing of the sheet - the edge: the end of the sheet on both sides - the useful width or the effective width of the sheet cover on the work: the distance between the two edges Sheet - Wing width: the horizontal distance between the center of the upper wings or lower wings - Web: the sloping part between the upper and lower wings - Tread: the gap and protrusions in the upper and lower wings - Ridge: the raised part on the web of the sheet For more information and to register your orders, please contact the numbers listed in the information section or visit our website athttps://foladkabir.com
Company | شرکت فولادکبیر |
---|---|
Tel | +98 21-8×××8450 |
Mobile | +98 912×××4397 |
Instagram page | |
Telegram | Telegram link |
Website | https://sgkabir.com/ |
Country | Iran |
Province | Tehran |
Address | آدرس : سهروردی شمالی بالاتر از میدان پالیزی پلاک 616 طبقه سوم |
Postal code | 1556857736 |