Chemical additives concrete – chemical, concrete, Plast

Thermowood paint restoration services, plastic wood (PVC or polyethylene) and cement board by glossy or matte acrylic solvent-based sealer and killer with needle glossy or super matte surface texture, which is completely resistant to UV rays and penetration Water is isolated, it is formed, with stability and long life of paint coating based on solvent-based acrylic polymer, waterproof and mineral deposits.\r\nFeatures of solvent-based acrylic killer compared to water-based acrylic killer.\r\n1- Water-based acrylic paint has a matte surface, while solvent-based acrylic paint has a shiny surface with needle texture and very suitable for wood polishing.\r\n2- Solvent-based acrylic killer is 100% waterproof, while water-based acrylic is not completely waterproof.\r\n3- Both are resistant to UV rays.\r\n4- Solvent-based acrylic paint does not leave brush marks when processed on surfaces by a brush. If water-based acrylic paint has a big problem of brush marks and processing difficulty.\r\n5- Solvent-based acrylic paint has strong adhesion and chemical bonding to PVC, plastic wood or plywood, while water-based acrylic paint peels on plastic or plastic wood and is not suitable for this work.\r\n6- Solvent-based acrylic paint can be used simultaneously on wood, metal, plastic, cement board, fiber cement board, brick, stone, and especially granite and construction materials, and it has a clearer surface than glass on all surfaces, but the color Water-based acrylic has a much more limited application, and most importantly, it has a dull and lifeless surface and does not have the proper polish to reveal the three-dimensional texture of wood.\r\n7- Solvent-based acrylic killer made of PMMA polymer gives the surface of wood and plastic wood a wet and permanent wet condition and has no limit on the number of paint processing times, while water-based acrylic killer lacks such a feature due to its opaqueness. .\r\nThermowood paint restoration. Thermowood paint restoration. Thermowood paint restoration. Thermowood paint restoration. Thermowood paint restoration. Plastic wood restoration. Plastic wood restoration. Plastic wood restoration. Plastic wood restoration. Plastic wood restoration. Clear acrylic instant gloss killer. Clear acrylic instant gloss killer. Perfectly transparent acrylic instant gloss killer. Solvent-based needle gloss acrylic killer.. Solvent-based needle gloss acrylic killer.. Solvent-based needle gloss acrylic killer.. Solvent-based needle gloss acrylic killer. Solvent-based needle. Wood, plastic and polywood. Paint for wood, plastic and polywood. Paint for wood, plastic and polywood. Paint for wood, plastic and polywood.

Crushed stone is a stone that is naturally extracted from quarries. If the carcass stone is shaped with an ax, the quarry stone is obtained. In building materials stores, it is also called rubble stone, flat stone. Rubble stone has high resistance and low price and is widely used in buildings. Quarry stone is used in many cases, we mention several of them below: Designing and implementing and executing fountains, stairs, flooring, and landscaping of the yard of a house or villa, walls and columns.

Marble, granite, limestone and other decorative stones are durable materials and work for a lifetime. However, if they are not installed properly and are not well maintained. , There are problems for them. There are several reasons for the yellowing of the stone. Dirt and pus may be absorbed by the stone and cause jaundice. Some stones rust over time and the stone turns yellow. These problems are especially problematic in white stones. Some cases of contamination or waxes have caused jaundice. All of these cases are removed with our detergent solution But if rust or the use of 123 glue is the cause of jaundice, it is best to use nano-shine solution. In short, if we want to introduce the product, we can say This alkaline solution completely cleans the yellown without damaging the work surface and completely penetrating the stone… How to use the material: A two-component product consisting of a liquid component and a powder component that is thoroughly mixed in a suitable container and applied to the desired stain surface with brush number 1 or 2. Location Cover the application with thick plastic or cellophane and glue around it so that the outside air does not penetrate under the nylon. After two or three days, open it and wash with plenty of water, preferably with pressure. Keep in mind that your surface must be thoroughly clean and dry before application. , Yellow stain glue 123, cleaning yellow stain glue 123